Nelson, I opened a bug regarding your issue https://bugzilla.redhat.com/show_bug.cgi?id=1378340
And send a fix: https://gerrit.ovirt.org/#/c/64272/ Thank you for your help! Shahar. On 21.09.16 10:57, Shahar Havivi wrote: > On 20.09.16 10:24, Nelson Lameiras wrote: > > Here is the disk section of my vm, > > > > ... > > <disk type='block' device='disk'> > > <driver name='qemu' type='raw' cache='none' io='native'/> > > <source dev='/dev/mapper/vg_01-lv_sys'/> > > <target dev='vda' bus='virtio'/> > > <address type='pci' domain='0x0000' bus='0x00' slot='0x07' > > function='0x0'/> > > </disk> > > <disk type='block' device='disk'> > > <driver name='qemu' type='raw' cache='none' io='native'/> > > <source dev='/dev/sdc'/> > > <target dev='vdb' bus='virtio'/> > > <address type='pci' domain='0x0000' bus='0x00' slot='0x08' > > function='0x0'/> > > </disk> > > ... > > > > nelson > Thanks Nelson, > bz 1362525 will not solve your issue. > We will start work on that block device issue shortly and I hope that it will > make it to the next release. > > Thank you, > Shahar. > > > > > > > ----- Original Message ----- > > From: "Shahar Havivi" <shav...@redhat.com> > > To: "Nelson Lameiras" <nelson.lamei...@lyra-network.com> > > Cc: "Nisim Simsolo" <nsims...@redhat.com>, users@ovirt.org > > Sent: Tuesday, September 20, 2016 8:04:41 AM > > Subject: Re: [ovirt-users] can't import vm from KVM host > > > > On 19.09.16 18:11, Nelson Lameiras wrote: > > > Well I think I have a rather "classical" environment : > > > > > > This is the test setup I created (from scratch) in order to simulate > > > future migrations (which will be used to migrate our hundreds of vm in > > > production) > > > > > > On one side, I have a x86_64 centos7.2+KVM hosting one VM with 2 iscsi > > > disks : > > > 1 LVM block device /dev/mapper/vg_01-lv_sys, using virtio > > > 1 block device /dev/sdc, using virtio > > > > > > on the other side, I have a x86_64 centos 7.2 oVirt cluster (2 hosts, > > > same hardware as KVM hosts) installed with 4.0.3 oVirt (hosts and engine) > > > fully upgraded to 4.0.4RC1 (hosts and engine) > > > Target would be oVirt iscsi Data Domain disk (which is irrelevant because > > > the problem I'm describing arises before selecting oVirt target) > > > > > > I'm using the GUI to test the native import capabilities of oVirt "Import > > > VM" > > > When selecting KVM import, putting correct URL data (using either tcp or > > > ssh transport), I get a list of VM machines running in the KVM cluster > > > (for this exemple, only the one VM described above), but the disk count > > > is always 0. Which makes it impossible to import the VM. > > > > > > I should add that I made the same VM import using "local hard drives" > > > (ie. local raw file) and it works as expected, I can see one or multiple > > > disks and import them easily to oVirt. The problem seems to manifest > > > itself only when importing disks using block devices directly. > > > > > > Do you need more information from me, or make more tests? > > > > > > thanks a lot, > > > nelson > > Can you post the libvirt xml as attachment here (at least the disks > > sections): > > > > $ virsh -r dumpxml <vmname> > > > > Shahar. _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
