qemu-kvm: warning: CPU(s) not present in any NUMA nodes: CPU 4 [socket-id:
4, core-id: 0, thread-id: 0], CPU 5 [socket
-id: 5, core-id: 0, thread-id: 0], CPU 6 [socket-id: 6, core-id: 0,
thread-id: 0], CPU 7 [socket-id: 7, core-id: 0, thread-id: 0], CPU 8
[socket-i
d: 8, core-id: 0, thread-id: 0], CPU 9 [socket-id: 9, core-id: 0,
thread-id: 0], CPU 10 [socket-id: 10, core-id: 0, thread-id: 0], CPU 11
[socket-
id: 11, core-id: 0, thread-id: 0], CPU 12 [socket-id: 12, core-id: 0,
thread-id: 0], CPU 13 [socket-id: 13, core-id: 0, thread-id: 0], CPU 14 [soc
ket-id: 14, core-id: 0, thread-id: 0], CPU 15 [socket-id: 15, core-id: 0,
thread-id: 0]
2019-02-16T01:45:22.366102Z qemu-kvm: warning: All CPU(s) up to maxcpus
should be described in NUMA config, ability to start up with partial NUMA
mappings is obsoleted and will be removed in future


as far as I am aware, I have assigned this VM to NUMA 1 which has 12 cores,
64GB ram




On Fri, Feb 15, 2019 at 4:32 PM Darin Schmidt <darinschm...@gmail.com>
wrote:

> Sorry it took so long, but I got a hold of a windows 7 pro ISO and it does
> the same thing. I get the same " Sytem Thread Exception Not Handled" error
> after a few seconds of trying to boot up from the install iso.
>
> On Tue, Feb 5, 2019 at 8:06 AM Darin Schmidt <darinschm...@gmail.com>
> wrote:
>
>> Currently I dont, but I can get my hands on one later today. I'll let you
>> know how it goes. I dont think I'll have access to the system today though.
>>
>> On Tue, Feb 5, 2019 at 7:57 AM Nisim Simsolo <nsims...@redhat.com> wrote:
>>
>>> Do you have any other Windows ISO (not necessarily Windows 10) to check
>>> in order to see if it's not an issue with the ISO file?
>>>
>>>
>>> On Tue, Feb 5, 2019 at 2:52 PM Darin Schmidt <darinschm...@gmail.com>
>>> wrote:
>>>
>>>> I dont even get to that point. The VM seems to detect the windows.iso I
>>>> downloaded from MS, the windows icon shows up, then it sits there for a
>>>> while, then I get the error in the picture I attached complaining about a
>>>> Sytem Thread Exception Not Handled. I dont make it to the install process
>>>> for windows.
>>>>
>>>> On Tue, Feb 5, 2019 at 7:46 AM Nisim Simsolo <nsims...@redhat.com>
>>>> wrote:
>>>>
>>>>> Hi
>>>>>
>>>>> If it's not Hyper-V SynIC issue, then it might be related to the disk
>>>>> interface.
>>>>> By default, the disk interface is VirtIO and Windows cannot see this
>>>>> interface until you intall VirtIO-Win disk driver.
>>>>> In order to do that, make sure you have VirtIO-Win.ISO in the ISO
>>>>> domain
>>>>> and during the Windows installation, when it's asking for disk
>>>>> location, change the VM CD to virtio-win.iso
>>>>> Click on "browse drivers" in the Windows installation window and
>>>>> install viostor from the ISO file.
>>>>> after the driver is installed, change the VM CD back to the Windows
>>>>> ISO -> refresh and continue the Windows installation.
>>>>>
>>>>> Please let me know if you still have issues.
>>>>>
>>>>> Thanks
>>>>>
>>>>>
>>>>>
>>>>> On Sat, Feb 2, 2019 at 5:22 PM Darin Schmidt <darinschm...@gmail.com>
>>>>> wrote:
>>>>>
>>>>>> Thanks, that sort of helped. I've ran yum update a dozen times and
>>>>>> not till this morning was there a kernel update... lol
>>>>>>
>>>>>> I'm able to startup the VM, but when it loads the ISO to install
>>>>>> Windows 10 which I downloaded from Microsoft, Attached is what always
>>>>>> happens. Perhaps my ISO is corrupt?
>>>>>>
>>>>>> On Sat, Feb 2, 2019 at 4:39 AM Dominik Holler <dhol...@redhat.com>
>>>>>> wrote:
>>>>>>
>>>>>>> On Fri, 1 Feb 2019 17:37:30 -0500
>>>>>>> Darin Schmidt <darinschm...@gmail.com> wrote:
>>>>>>>
>>>>>>> > [root@ovirt ~]# rpm -qa kernel
>>>>>>> > kernel-3.10.0-957.1.3.el7.x86_64
>>>>>>> > kernel-3.10.0-862.el7.x86_64
>>>>>>> > [root@ovirt ~]# uname -a
>>>>>>> > Linux ovirt 3.10.0-957.1.3.el7.x86_64 #1 SMP Thu Nov 29 14:49:43
>>>>>>> UTC 2018
>>>>>>>
>>>>>>> https://bugzilla.redhat.com/1638835 looks like there is at least
>>>>>>> kernel 3.10.0-957.3.1.el7.x86_64 required.
>>>>>>> Can you please check if upgrading to kernel solves the issue for you?
>>>>>>> I expectect at least kernel 3.10.0-957.5.1 to be availible.
>>>>>>>
>>>>>>> > x86_64 x86_64 x86_64 GNU/Linux
>>>>>>> > [root@ovirt ~]# rpm -qa qemu-kvm-ev
>>>>>>> > qemu-kvm-ev-2.12.0-18.el7_6.3.1.x86_64
>>>>>>> > [root@ovirt ~]# rpm -qa libvirt
>>>>>>> > libvirt-4.5.0-10.el7_6.3.x86_64
>>>>>>>
>>>>>>> > here is the vdsm
>>>>>>> >
>>>>>>>
>>>>>>> contains:
>>>>>>> Hyper-V SynIC is not supported by kernel
>>>>>>>
>>>>>>>
>>>>>>> > On Fri, Feb 1, 2019 at 3:05 PM Dominik Holler <dhol...@redhat.com>
>>>>>>> > wrote:
>>>>>>> >
>>>>>>> > > On Fri, 1 Feb 2019 11:48:51 -0500
>>>>>>> > > Darin Schmidt <darinschm...@gmail.com> wrote:
>>>>>>> > >
>>>>>>> > > > I have successfully setup a centos vm, its up and running. Now
>>>>>>> I
>>>>>>> > > > need to setup a windows 10 VM and I cant seem to get anything
>>>>>>> to
>>>>>>> > > > work.
>>>>>>> > > >
>>>>>>> > > > Ive tried setting the OS type to other or Windows 10 64bit.
>>>>>>> With
>>>>>>> > > > Windows 64bit, it fails to startup at all.... When I select
>>>>>>> > > > OtherOS it will allow me to start to run the Windows ISO, but
>>>>>>> > > > then fails after a few seconds as well. Is there something I'm
>>>>>>> > > > not correctly configuring?
>>>>>>> > >
>>>>>>> > > Would you please share vdsm.log,  and the output of
>>>>>>> > > rpm -qa kernel
>>>>>>> > > uname -a
>>>>>>> > > rpm -qa qemu-kvm-ev
>>>>>>> > > rpm -qa libvirt
>>>>>>> > > from of the host, and the relevant part of engine.log?
>>>>>>> > >
>>>>>>>
>>>>>>> _______________________________________________
>>>>>> Users mailing list -- users@ovirt.org
>>>>>> To unsubscribe send an email to users-le...@ovirt.org
>>>>>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>>>>>> oVirt Code of Conduct:
>>>>>> https://www.ovirt.org/community/about/community-guidelines/
>>>>>> List Archives:
>>>>>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/BYIZ36LEPVD5FAD77L7FSDBHN2TZD4SD/
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Nisim Simsolo
>>>>> QE -Testing Engineer
>>>>> IRC: nsimsolo
>>>>> int phone - 8272305
>>>>> mobile - 054-4779934
>>>>>
>>>>
>>>
>>> --
>>> Nisim Simsolo
>>> QE -Testing Engineer
>>> IRC: nsimsolo
>>> int phone - 8272305
>>> mobile - 054-4779934
>>>
>>
_______________________________________________
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/NG3IWBM6EORY6C55E2T7JIFVBTGTMWFD/

Reply via email to