Oh and also gluster interface should not be set as default route either. On Tue, Apr 28, 2020 at 7:19 PM Jayme <jay...@gmail.com> wrote:
> On gluster interface try setting gateway to 10.0.1.1 > > If that doesn’t work let us know where the process is failing currently > and with what errors etc. > > On Tue, Apr 28, 2020 at 6:54 PM Shareef Jalloq <shar...@jalloq.co.uk> > wrote: > >> Thanks. I have the DNS but must have my interface config wrong. On my >> first node I have two interfaces in use, em1 for the management interface >> and p1p1 for the Gluster interface. >> >> [root@ovirt-node-00 ~]# cat /etc/sysconfig/network-scripts/ifcfg-em1 >> >> TYPE=Ethernet >> >> PROXY_METHOD=none >> >> BROWSER_ONLY=no >> >> BOOTPROTO=none >> >> DEFROUTE=yes >> >> IPV4_FAILURE_FATAL=no >> >> IPV6INIT=no >> >> IPV6_AUTOCONF=yes >> >> IPV6_DEFROUTE=yes >> >> IPV6_FAILURE_FATAL=no >> >> IPV6_ADDR_GEN_MODE=stable-privacy >> >> NAME=em1 >> >> UUID=724cddb2-8ce9-43ea-8c0e-e1aff19e72cc >> >> DEVICE=em1 >> >> ONBOOT=yes >> >> IPADDR=10.0.0.31 >> >> PREFIX=24 >> >> GATEWAY=10.0.0.1 >> >> DNS1=10.0.0.1 >> >> >> [root@ovirt-node-00 ~]# cat /etc/sysconfig/network-scripts/ifcfg-p1p1 >> >> TYPE=Ethernet >> >> PROXY_METHOD=none >> >> BROWSER_ONLY=no >> >> BOOTPROTO=none >> >> DEFROUTE=yes >> >> IPV4_FAILURE_FATAL=no >> >> IPV6INIT=no >> >> IPV6_AUTOCONF=yes >> >> IPV6_DEFROUTE=yes >> >> IPV6_FAILURE_FATAL=no >> >> IPV6_ADDR_GEN_MODE=stable-privacy >> >> NAME=p1p1 >> >> UUID=1adb45d3-4dac-4bac-bb19-257fb9c7016b >> >> DEVICE=p1p1 >> >> ONBOOT=yes >> >> IPADDR=10.0.1.31 >> >> PREFIX=24 >> >> GATEWAY=10.0.0.1 >> >> DNS1=10.0.0.1 >> >> On Tue, Apr 28, 2020 at 10:47 PM Jayme <jay...@gmail.com> wrote: >> >>> You should use host names for gluster like gluster1.hostname.com that >>> resolve to the ip chosen for gluster. >>> >>> For my env I have something like this: >>> >>> Server0: >>> Host0.example.com 10.10.0.100 >>> Gluster0.example.com 10.0.1.100 >>> >>> Same thing for other two severs except hostnames and ips of course. >>> >>> Use the gluster hostnames for the first step then the sever hostnames >>> for the others. >>> >>> I made sure I could ssh to and from both hostX and glusterX on each >>> server. >>> >>> On Tue, Apr 28, 2020 at 6:34 PM Shareef Jalloq <shar...@jalloq.co.uk> >>> wrote: >>> >>>> Perhaps it's me, but these two documents seem to disagree on what >>>> hostnames to use when setting up. Can someone clarify. >>>> >>>> The main documentation here: >>>> https://www.ovirt.org/documentation/gluster-hyperconverged/chap-Deploying_Hyperconverged.html >>>> talks >>>> about copying the SSH keys to the gluster host address but the old blog >>>> post with an outdated interface here: >>>> https://blogs.ovirt.org/2018/02/up-and-running-with-ovirt-4-2-and-gluster-storage/ >>>> uses >>>> the node address. >>>> >>>> In the first step of the hyperconverged Gluster wizard, when it asks >>>> for "Gluster network address", is this wanting the host IP or the IP of the >>>> Gluster interface? >>>> >>>> On Tue, Apr 28, 2020 at 10:24 PM Shareef Jalloq <shar...@jalloq.co.uk> >>>> wrote: >>>> >>>>> OK, thanks both, that seems to have fixed that issue. >>>>> >>>>> Is there any other config I need to do because the next step in the >>>>> deployment guide of copying SSH keys seems to take over a minute just to >>>>> prompt for a password. Something smells here. >>>>> >>>>> On Tue, Apr 28, 2020 at 7:32 PM Jayme <jay...@gmail.com> wrote: >>>>> >>>>>> You should be using a different subnet for each. I.e. 10.0.0.30 and >>>>>> 10.0.1.30 for example >>>>>> >>>>>> On Tue, Apr 28, 2020 at 2:49 PM Shareef Jalloq <shar...@jalloq.co.uk> >>>>>> wrote: >>>>>> >>>>>>> Hi, >>>>>>> >>>>>>> I'm in the process of trying to set up an HCI 3 node cluster in my >>>>>>> homelab to better understand the Gluster setup and have failed at the >>>>>>> first >>>>>>> hurdle. I've set up the node interfaces on the built in NIC and am >>>>>>> using a >>>>>>> PCI NIC for the Gluster traffic - at the moment this is 1Gb until I can >>>>>>> upgrade - and I've assigned a static IP to both interfaces and also have >>>>>>> both entries in my DNS. >>>>>>> >>>>>>> From any of the three nodes, I can ping the gateway, the other >>>>>>> nodes, any external IP but I can't ping any of the Gluster NICs. What >>>>>>> have >>>>>>> I forgotten to do? Here's the relevant output of 'ip addr show'. em1 is >>>>>>> the motherboard NIC and p1p1 is port 1 of an Intel NIC. The >>>>>>> /etc/sysconfig/network-scripts/ifcfg-<if> scripts are identical aside >>>>>>> from >>>>>>> IPADDR, NAME, DEVICE and UUID fields. >>>>>>> >>>>>>> Thanks, Shareef. >>>>>>> >>>>>>> [root@ovirt-node-00 ~]# ip addr show >>>>>>> >>>>>>> >>>>>>> 2: p1p1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state >>>>>>> UP group default qlen 1000 >>>>>>> >>>>>>> link/ether a0:36:9f:1f:f9:78 brd ff:ff:ff:ff:ff:ff >>>>>>> >>>>>>> inet 10.0.0.34/24 brd 10.0.0.255 scope global noprefixroute p1p1 >>>>>>> >>>>>>> valid_lft forever preferred_lft forever >>>>>>> >>>>>>> inet6 fd4d:e9e3:6f5:1:a236:9fff:fe1f:f978/64 scope global >>>>>>> mngtmpaddr dynamic >>>>>>> >>>>>>> valid_lft 7054sec preferred_lft 7054sec >>>>>>> >>>>>>> inet6 fe80::a236:9fff:fe1f:f978/64 scope link >>>>>>> >>>>>>> valid_lft forever preferred_lft forever >>>>>>> >>>>>>> >>>>>>> 4: em1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast >>>>>>> state UP group default qlen 1000 >>>>>>> >>>>>>> link/ether 98:90:96:a1:16:ad brd ff:ff:ff:ff:ff:ff >>>>>>> >>>>>>> inet 10.0.0.31/24 brd 10.0.0.255 scope global noprefixroute em1 >>>>>>> >>>>>>> valid_lft forever preferred_lft forever >>>>>>> >>>>>>> inet6 fd4d:e9e3:6f5:1:9a90:96ff:fea1:16ad/64 scope global >>>>>>> mngtmpaddr dynamic >>>>>>> >>>>>>> valid_lft 7054sec preferred_lft 7054sec >>>>>>> >>>>>>> inet6 fe80::9a90:96ff:fea1:16ad/64 scope link >>>>>>> >>>>>>> valid_lft forever preferred_lft forever >>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> Users mailing list -- users@ovirt.org >>>>>>> To unsubscribe send an email to users-le...@ovirt.org >>>>>>> Privacy Statement: https://www.ovirt.org/privacy-policy.html >>>>>>> oVirt Code of Conduct: >>>>>>> https://www.ovirt.org/community/about/community-guidelines/ >>>>>>> List Archives: >>>>>>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/S7UESGZ6MJXPVKN2UZJTO4OZYGOQIWHE/ >>>>>>> >>>>>>
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/QJJFDVYRY3Q6WICC7XBLWC2K5XV7DC3Z/
