OK, that's got it, thanks. I really need to put some effort in sharpening my networking knowledge.
On Tue, Apr 28, 2020 at 11:20 PM Jayme <jay...@gmail.com> wrote: > Oh and also gluster interface should not be set as default route either. > > On Tue, Apr 28, 2020 at 7:19 PM Jayme <jay...@gmail.com> wrote: > >> On gluster interface try setting gateway to 10.0.1.1 >> >> If that doesn’t work let us know where the process is failing currently >> and with what errors etc. >> >> On Tue, Apr 28, 2020 at 6:54 PM Shareef Jalloq <shar...@jalloq.co.uk> >> wrote: >> >>> Thanks. I have the DNS but must have my interface config wrong. On my >>> first node I have two interfaces in use, em1 for the management interface >>> and p1p1 for the Gluster interface. >>> >>> [root@ovirt-node-00 ~]# cat /etc/sysconfig/network-scripts/ifcfg-em1 >>> >>> TYPE=Ethernet >>> >>> PROXY_METHOD=none >>> >>> BROWSER_ONLY=no >>> >>> BOOTPROTO=none >>> >>> DEFROUTE=yes >>> >>> IPV4_FAILURE_FATAL=no >>> >>> IPV6INIT=no >>> >>> IPV6_AUTOCONF=yes >>> >>> IPV6_DEFROUTE=yes >>> >>> IPV6_FAILURE_FATAL=no >>> >>> IPV6_ADDR_GEN_MODE=stable-privacy >>> >>> NAME=em1 >>> >>> UUID=724cddb2-8ce9-43ea-8c0e-e1aff19e72cc >>> >>> DEVICE=em1 >>> >>> ONBOOT=yes >>> >>> IPADDR=10.0.0.31 >>> >>> PREFIX=24 >>> >>> GATEWAY=10.0.0.1 >>> >>> DNS1=10.0.0.1 >>> >>> >>> [root@ovirt-node-00 ~]# cat /etc/sysconfig/network-scripts/ifcfg-p1p1 >>> >>> TYPE=Ethernet >>> >>> PROXY_METHOD=none >>> >>> BROWSER_ONLY=no >>> >>> BOOTPROTO=none >>> >>> DEFROUTE=yes >>> >>> IPV4_FAILURE_FATAL=no >>> >>> IPV6INIT=no >>> >>> IPV6_AUTOCONF=yes >>> >>> IPV6_DEFROUTE=yes >>> >>> IPV6_FAILURE_FATAL=no >>> >>> IPV6_ADDR_GEN_MODE=stable-privacy >>> >>> NAME=p1p1 >>> >>> UUID=1adb45d3-4dac-4bac-bb19-257fb9c7016b >>> >>> DEVICE=p1p1 >>> >>> ONBOOT=yes >>> >>> IPADDR=10.0.1.31 >>> >>> PREFIX=24 >>> >>> GATEWAY=10.0.0.1 >>> >>> DNS1=10.0.0.1 >>> >>> On Tue, Apr 28, 2020 at 10:47 PM Jayme <jay...@gmail.com> wrote: >>> >>>> You should use host names for gluster like gluster1.hostname.com that >>>> resolve to the ip chosen for gluster. >>>> >>>> For my env I have something like this: >>>> >>>> Server0: >>>> Host0.example.com 10.10.0.100 >>>> Gluster0.example.com 10.0.1.100 >>>> >>>> Same thing for other two severs except hostnames and ips of course. >>>> >>>> Use the gluster hostnames for the first step then the sever hostnames >>>> for the others. >>>> >>>> I made sure I could ssh to and from both hostX and glusterX on each >>>> server. >>>> >>>> On Tue, Apr 28, 2020 at 6:34 PM Shareef Jalloq <shar...@jalloq.co.uk> >>>> wrote: >>>> >>>>> Perhaps it's me, but these two documents seem to disagree on what >>>>> hostnames to use when setting up. Can someone clarify. >>>>> >>>>> The main documentation here: >>>>> https://www.ovirt.org/documentation/gluster-hyperconverged/chap-Deploying_Hyperconverged.html >>>>> talks >>>>> about copying the SSH keys to the gluster host address but the old blog >>>>> post with an outdated interface here: >>>>> https://blogs.ovirt.org/2018/02/up-and-running-with-ovirt-4-2-and-gluster-storage/ >>>>> uses >>>>> the node address. >>>>> >>>>> In the first step of the hyperconverged Gluster wizard, when it asks >>>>> for "Gluster network address", is this wanting the host IP or the IP of >>>>> the >>>>> Gluster interface? >>>>> >>>>> On Tue, Apr 28, 2020 at 10:24 PM Shareef Jalloq <shar...@jalloq.co.uk> >>>>> wrote: >>>>> >>>>>> OK, thanks both, that seems to have fixed that issue. >>>>>> >>>>>> Is there any other config I need to do because the next step in the >>>>>> deployment guide of copying SSH keys seems to take over a minute just to >>>>>> prompt for a password. Something smells here. >>>>>> >>>>>> On Tue, Apr 28, 2020 at 7:32 PM Jayme <jay...@gmail.com> wrote: >>>>>> >>>>>>> You should be using a different subnet for each. I.e. 10.0.0.30 and >>>>>>> 10.0.1.30 for example >>>>>>> >>>>>>> On Tue, Apr 28, 2020 at 2:49 PM Shareef Jalloq <shar...@jalloq.co.uk> >>>>>>> wrote: >>>>>>> >>>>>>>> Hi, >>>>>>>> >>>>>>>> I'm in the process of trying to set up an HCI 3 node cluster in my >>>>>>>> homelab to better understand the Gluster setup and have failed at the >>>>>>>> first >>>>>>>> hurdle. I've set up the node interfaces on the built in NIC and am >>>>>>>> using a >>>>>>>> PCI NIC for the Gluster traffic - at the moment this is 1Gb until I can >>>>>>>> upgrade - and I've assigned a static IP to both interfaces and also >>>>>>>> have >>>>>>>> both entries in my DNS. >>>>>>>> >>>>>>>> From any of the three nodes, I can ping the gateway, the other >>>>>>>> nodes, any external IP but I can't ping any of the Gluster NICs. What >>>>>>>> have >>>>>>>> I forgotten to do? Here's the relevant output of 'ip addr show'. em1 >>>>>>>> is >>>>>>>> the motherboard NIC and p1p1 is port 1 of an Intel NIC. The >>>>>>>> /etc/sysconfig/network-scripts/ifcfg-<if> scripts are identical aside >>>>>>>> from >>>>>>>> IPADDR, NAME, DEVICE and UUID fields. >>>>>>>> >>>>>>>> Thanks, Shareef. >>>>>>>> >>>>>>>> [root@ovirt-node-00 ~]# ip addr show >>>>>>>> >>>>>>>> >>>>>>>> 2: p1p1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state >>>>>>>> UP group default qlen 1000 >>>>>>>> >>>>>>>> link/ether a0:36:9f:1f:f9:78 brd ff:ff:ff:ff:ff:ff >>>>>>>> >>>>>>>> inet 10.0.0.34/24 brd 10.0.0.255 scope global noprefixroute >>>>>>>> p1p1 >>>>>>>> >>>>>>>> valid_lft forever preferred_lft forever >>>>>>>> >>>>>>>> inet6 fd4d:e9e3:6f5:1:a236:9fff:fe1f:f978/64 scope global >>>>>>>> mngtmpaddr dynamic >>>>>>>> >>>>>>>> valid_lft 7054sec preferred_lft 7054sec >>>>>>>> >>>>>>>> inet6 fe80::a236:9fff:fe1f:f978/64 scope link >>>>>>>> >>>>>>>> valid_lft forever preferred_lft forever >>>>>>>> >>>>>>>> >>>>>>>> 4: em1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast >>>>>>>> state UP group default qlen 1000 >>>>>>>> >>>>>>>> link/ether 98:90:96:a1:16:ad brd ff:ff:ff:ff:ff:ff >>>>>>>> >>>>>>>> inet 10.0.0.31/24 brd 10.0.0.255 scope global noprefixroute em1 >>>>>>>> >>>>>>>> valid_lft forever preferred_lft forever >>>>>>>> >>>>>>>> inet6 fd4d:e9e3:6f5:1:9a90:96ff:fea1:16ad/64 scope global >>>>>>>> mngtmpaddr dynamic >>>>>>>> >>>>>>>> valid_lft 7054sec preferred_lft 7054sec >>>>>>>> >>>>>>>> inet6 fe80::9a90:96ff:fea1:16ad/64 scope link >>>>>>>> >>>>>>>> valid_lft forever preferred_lft forever >>>>>>>> >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> Users mailing list -- users@ovirt.org >>>>>>>> To unsubscribe send an email to users-le...@ovirt.org >>>>>>>> Privacy Statement: https://www.ovirt.org/privacy-policy.html >>>>>>>> oVirt Code of Conduct: >>>>>>>> https://www.ovirt.org/community/about/community-guidelines/ >>>>>>>> List Archives: >>>>>>>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/S7UESGZ6MJXPVKN2UZJTO4OZYGOQIWHE/ >>>>>>>> >>>>>>>
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/K4MP6F2UBLHZISDDBZOEWLEHSSIQNFAV/