Hi Shovon,
we don't have a board "CM5000MSP" in RIOT. Do you mean TelosB? We have a
couple of MSP430 based boards in RIOT. Some, e.g. MS*B*-430H need the
Olimex debugger. Some don't, e.g. TelosB. You need to build and flash
for the correct BOARD and obviously the board must be supported by RIOT.
Best
Peter
Am 05.07.2016 um 06:40 schrieb Nazmul Alam:
Hello,
I was trying to run an example program (hello-world) on the MSP430 based
board to test out riot-os, but flashing is failing -
make BOARD=msb-430 flash
with following error
usbutil: unable to find a device matching 15ba:0031
The device is connected directly to USB port and I believe it is using
FDTI driver (USB-RS232).
lsusb shows -
Bus 002 Device 004: ID 0451:8142 Texas Instruments, Inc. TUSB8041 4-Port Hub
Bus 002 Device 003: ID 0451:8142 Texas Instruments, Inc. TUSB8041 4-Port Hub
Bus 001 Device 007: ID 0403:6001 Future Technology Devices
International, Ltd FT232 USB-Serial (UART) IC
Bus 004 Device 003: ID 0451:8140 Texas Instruments, Inc.
Bus 004 Device 002: ID 0451:8140 Texas Instruments, Inc.
but the make flash is trying to use
mspdebug -j olimex "prog myihex"
so I believe the programmer is olimex (google shows JTAG based programmer).
So, how can I flash riot-os in the device over the FDTI?
P/S: I was able to flash contiki os in it over the FDTI driver.
Thanks in advance.
regards,
Shovon.
_______________________________________________
users mailing list
[email protected]
https://lists.riot-os.org/mailman/listinfo/users
--
Peter Kietzmann
Hamburg University of Applied Sciences
Dept. Informatik, Internet Technologies Group
Berliner Tor 7, 20099 Hamburg, Germany
Fon: +49-40-42875-8426
Web: http://www.haw-hamburg.de/inet
_______________________________________________
users mailing list
[email protected]
https://lists.riot-os.org/mailman/listinfo/users
