Hi Peter, I think I used make BOARD=msb-430 instead of telosb. May be I mistakenly used MC model as board because in my cause the script was different than you mentioned.
I will check it and confirm it. Thanks again for the direction. On Tue, Jul 5, 2016 at 3:33 AM, Peter Kietzmann < [email protected]> wrote: > Hi, > > the TelosB is supported by RIOT, yes. And it does not need an Olimex > adapter cause it has a "GoodFET" jtag adapter on board. The script > RIOT/dist/tools/goodfet/goodfet.bsl is called by the "make flash" command. > > Did you try "BOARD=telosb make clean all flash"? It worked for me without > any problems. > > Cheers > Peter > > Am 05.07.2016 um 09:17 schrieb Nazmul Alam: > >> Hello Peter, >> Thanks for quick response. >> Yes, The board is TelosB. And AFAI understand the board is supported by >> riot-os. >> >> But I was unable to flash it as it uses mspdebug tool which in turns >> uses the Olimex programmer. >> >> Is it mandatory for the board? >> Thanks again. >> Regards, >> >> On Jul 5, 2016 2:55 AM, "Peter Kietzmann" >> <[email protected] <mailto:[email protected]>> >> >> wrote: >> >> Hi Shovon, >> >> we don't have a board "CM5000MSP" in RIOT. Do you mean TelosB? We >> have a couple of MSP430 based boards in RIOT. Some, e.g. MS*B*-430H >> need the Olimex debugger. Some don't, e.g. TelosB. You need to build >> and flash for the correct BOARD and obviously the board must be >> supported by RIOT. >> >> Best >> Peter >> >> Am 05.07.2016 um 06:40 schrieb Nazmul Alam: >> >> Hello, >> I was trying to run an example program (hello-world) on the >> MSP430 based >> board to test out riot-os, but flashing is failing - >> make BOARD=msb-430 flash >> with following error >> usbutil: unable to find a device matching 15ba:0031 >> >> The device is connected directly to USB port and I believe it is >> using >> FDTI driver (USB-RS232). >> lsusb shows - >> Bus 002 Device 004: ID 0451:8142 Texas Instruments, Inc. >> TUSB8041 4-Port Hub >> Bus 002 Device 003: ID 0451:8142 Texas Instruments, Inc. >> TUSB8041 4-Port Hub >> Bus 001 Device 007: ID 0403:6001 Future Technology Devices >> International, Ltd FT232 USB-Serial (UART) IC >> Bus 004 Device 003: ID 0451:8140 Texas Instruments, Inc. >> Bus 004 Device 002: ID 0451:8140 Texas Instruments, Inc. >> >> but the make flash is trying to use >> mspdebug -j olimex "prog myihex" >> so I believe the programmer is olimex (google shows JTAG based >> programmer). >> >> So, how can I flash riot-os in the device over the FDTI? >> >> P/S: I was able to flash contiki os in it over the FDTI driver. >> >> Thanks in advance. >> regards, >> Shovon. >> >> >> _______________________________________________ >> users mailing list >> [email protected] <mailto:[email protected]> >> https://lists.riot-os.org/mailman/listinfo/users >> >> >> -- >> Peter Kietzmann >> >> Hamburg University of Applied Sciences >> Dept. Informatik, Internet Technologies Group >> Berliner Tor 7, 20099 Hamburg, Germany >> Fon: +49-40-42875-8426 <tel:%2B49-40-42875-8426> >> Web: http://www.haw-hamburg.de/inet >> _______________________________________________ >> users mailing list >> [email protected] <mailto:[email protected]> >> https://lists.riot-os.org/mailman/listinfo/users >> >> >> >> _______________________________________________ >> users mailing list >> [email protected] >> https://lists.riot-os.org/mailman/listinfo/users >> >> > -- > Peter Kietzmann > > Hamburg University of Applied Sciences > Dept. Informatik, Internet Technologies Group > Berliner Tor 7, 20099 Hamburg, Germany > Fon: +49-40-42875-8426 > Web: http://www.haw-hamburg.de/inet > _______________________________________________ > users mailing list > [email protected] > https://lists.riot-os.org/mailman/listinfo/users > -- with best regards, Nazmul Alam Shovon *শুভেচ্ছান্তে, নাজমুল আলম শোভন* email : [email protected] blog : http://yourdigitaleffects.blogspot.com
_______________________________________________ users mailing list [email protected] https://lists.riot-os.org/mailman/listinfo/users
