Hi,

the TelosB is supported by RIOT, yes. And it does not need an Olimex adapter cause it has a "GoodFET" jtag adapter on board. The script RIOT/dist/tools/goodfet/goodfet.bsl is called by the "make flash" command.

Did you try "BOARD=telosb make clean all flash"? It worked for me without any problems.

Cheers
Peter

Am 05.07.2016 um 09:17 schrieb Nazmul Alam:
Hello Peter,
Thanks for quick response.
Yes, The board is TelosB. And AFAI understand the board is supported by
riot-os.

But I was unable to flash it as it uses mspdebug tool which in turns
uses the Olimex programmer.

Is it mandatory for the board?
Thanks again.
Regards,

On Jul 5, 2016 2:55 AM, "Peter Kietzmann"
<[email protected] <mailto:[email protected]>>
wrote:

    Hi Shovon,

    we don't have a board "CM5000MSP" in RIOT. Do you mean TelosB? We
    have a couple of MSP430 based boards in RIOT. Some, e.g. MS*B*-430H
    need the Olimex debugger. Some don't, e.g. TelosB. You need to build
    and flash for the correct BOARD and obviously the board must be
    supported by RIOT.

    Best
    Peter

    Am 05.07.2016 um 06:40 schrieb Nazmul Alam:

        Hello,
        I was trying to run an example program (hello-world) on the
        MSP430 based
        board to test out riot-os, but flashing is failing -
        make BOARD=msb-430 flash
        with following error
        usbutil: unable to find a device matching 15ba:0031

        The device is connected directly to USB port and I believe it is
        using
        FDTI driver (USB-RS232).
        lsusb shows -
        Bus 002 Device 004: ID 0451:8142 Texas Instruments, Inc.
        TUSB8041 4-Port Hub
        Bus 002 Device 003: ID 0451:8142 Texas Instruments, Inc.
        TUSB8041 4-Port Hub
        Bus 001 Device 007: ID 0403:6001 Future Technology Devices
        International, Ltd FT232 USB-Serial (UART) IC
        Bus 004 Device 003: ID 0451:8140 Texas Instruments, Inc.
        Bus 004 Device 002: ID 0451:8140 Texas Instruments, Inc.

        but the make flash is trying to use
        mspdebug -j olimex "prog myihex"
        so I believe the programmer is olimex (google shows JTAG based
        programmer).

        So, how can I flash riot-os in the device over the FDTI?

        P/S: I was able to flash contiki os in it over the FDTI driver.

        Thanks in advance.
        regards,
        Shovon.


        _______________________________________________
        users mailing list
        [email protected] <mailto:[email protected]>
        https://lists.riot-os.org/mailman/listinfo/users


    --
    Peter Kietzmann

    Hamburg University of Applied Sciences
    Dept. Informatik, Internet Technologies Group
    Berliner Tor 7, 20099 Hamburg, Germany
    Fon: +49-40-42875-8426 <tel:%2B49-40-42875-8426>
    Web: http://www.haw-hamburg.de/inet
    _______________________________________________
    users mailing list
    [email protected] <mailto:[email protected]>
    https://lists.riot-os.org/mailman/listinfo/users



_______________________________________________
users mailing list
[email protected]
https://lists.riot-os.org/mailman/listinfo/users


--
Peter Kietzmann

Hamburg University of Applied Sciences
Dept. Informatik, Internet Technologies Group
Berliner Tor 7, 20099 Hamburg, Germany
Fon: +49-40-42875-8426
Web: http://www.haw-hamburg.de/inet
_______________________________________________
users mailing list
[email protected]
https://lists.riot-os.org/mailman/listinfo/users

Reply via email to