I did post previously here only once before about a porblem sending packets between a USRP B210 and a hackrf. The problem I nticed does not lie in the packet endocders/decoders, but in the actual reception of the signal to begin with: https://www.youtube.com/watch?v=kZTo8-32mIg
Please note the following: 1- I tested both of the USRP and HackRF for FM reception coming form local stations, and the results were positive. I was able to save WAV files and so forth. 2- I tried to transmit a wav file from the usrp to the hackrf (using NBFM blocks), nothing shows on the fft or scope plots in terms of the desired frequencyl, I could only detect extra added noise at the receiver side when my usrp is transmitting. 3- I then tried to send a simple sinusoidal wave at the same frequency fromt eh usrp to the hackrf, again, the fft doesnt show any detected signal. Your help is greatly appreciated. Thank you,
_______________________________________________ USRP-users mailing list [email protected] http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
