On 07/06/2018 03:25 PM, Kevin Grey via USRP-users wrote:
I did post previously here only once before about a porblem sending
packets between a USRP B210 and a hackrf. The problem I nticed does
not lie in the packet endocders/decoders, but in the actual reception
of the signal to begin with:
https://www.youtube.com/watch?v=kZTo8-32mIg
Please note the following:
1- I tested both of the USRP and HackRF for FM reception coming form
local stations, and the results were positive. I was able to save WAV
files and so forth.
2- I tried to transmit a wav file from the usrp to the hackrf (using
NBFM blocks), nothing shows on the fft or scope plots in terms of the
desired frequencyl, I could only detect extra added noise at the
receiver side when my usrp is transmitting.
3- I then tried to send a simple sinusoidal wave at the same frequency
fromt eh usrp to the hackrf, again, the fft doesnt show any detected
signal.
Your help is greatly appreciated.
Thank you,
Without seeing your code or .grc file or what have you, it's hard to help.
_______________________________________________
USRP-users mailing list
[email protected]
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
