On 10/05/2018 10:09 AM, ogün levent via USRP-users wrote:
Hi there,
Thanks for the replies. I reinstalled ubuntu 16.04(removed SoapyUHD
packages) did a clean install and checked everything. Still having the
problem. There is a photo in the attachments.
Regards.
Could you point us to the exact procedure that you used to install?
Paul Thevenon via USRP-users <[email protected]
<mailto:[email protected]>>, 5 Eki 2018 Cum, 10:49 tarihinde
şunu yazdı:
Hi, I went through the same difficulties and here is what solved
this issue:
- I deleted all the images from the /usr/local/share/uhd/images/
folder
- I manually downloaded some older version, available on
files.ettus.com/binaries/images
<http://files.ettus.com/binaries/images>. I chose the file
uhd-images_3.11.0.git-227-g9277fc58.zip
- I extracted it in the previous folder
- I tried to run a simple flowgraph on gnuradio-companion. I saw
the firmware upload, but it did not work.
- Then, I don't remember precisely what was needed, but I
unplugged/repluged everything, restarted the computer or just
gnuradio-companion, and it worked!
Hope it helps!
Paul
On 03-Oct-18 5:13 PM, Marcus D. Leech via USRP-users wrote:
On 10/03/2018 11:03 AM, ogün levent wrote:
Warning message can be seen in the attachments.
I'm going to guess that you have two different installations of
UHD on your system, or a "half-and-half" situation.
Did you get any errors when you ran uhd_images_downloader?
ogün levent <[email protected]
<mailto:[email protected]>>, 3 Eki 2018 Çar, 17:54 tarihinde
şunu yazdı:
Yes. We are trying to run the brand new device for the first
time.
Marcus D. Leech via USRP-users <[email protected]
<mailto:[email protected]>>, 3 Eki 2018 Çar, 17:52
tarihinde şunu yazdı:
On 10/03/2018 10:45 AM, ogün levent via USRP-users wrote:
> Hello there,
>
> Recently I received B210 and went through the
installation guide on
> the ettus website and loaded fpga images
uhd_images_downloader and
> everything seemed fine. When I tried to run a
flowgraph I recieved
> Runtime error. Is it because of the fpga image
version? If so is it
> possible to change fpga .bin file? How can I solve the
problem?
>
> Best
>
Did you power-cycle your USRP after loading new images?
_______________________________________________
USRP-users mailing list
[email protected]
<mailto:[email protected]>
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
_______________________________________________
USRP-users mailing list
[email protected] <mailto:[email protected]>
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
_______________________________________________
USRP-users mailing list
[email protected] <mailto:[email protected]>
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
_______________________________________________
USRP-users mailing list
[email protected]
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
_______________________________________________
USRP-users mailing list
[email protected]
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
