Thanks, I'll check it out.

Marcus D. Leech <[email protected]>, 5 Eki 2018 Cum, 17:32 tarihinde şunu
yazdı:

> On 10/05/2018 10:24 AM, ogün levent wrote:
>
> 1. Ardupilot ubuntu-prerequest-ubuntu.sh installed
> 2. Gnuradio 3.7.10 was installed with apt
> 3. UHD packages are downloaded for ubuntu 16.04
> https://kb.ettus.com/Building_and_Installing_the_USRP_Open-Source_Toolchain_(UHD_and_GNU_Radio)_on_Linux
> 4. sudo ldconfig
> 5.uhd_images_downloader(success)
> 6.uhd_find_devices(success)
> 7. uhd_usrp_probe (success)
> We had no problem with this procedure.
>
> Best.
>
> So, what you have now is a "mixed" installation.  The Gnu Radio from APT
> was compiled and linked against an older version of UHD, and
>   your compiled UHD is newer.
>
> I'd remove the Gnu Radio installation you have from APT, and follow the
> "Building and Installing Gnu Radio" guide from:
>
>
> https://kb.ettus.com/Building_and_Installing_the_USRP_Open-Source_Toolchain_%28UHD_and_GNU_Radio%29_on_Linux#Building_and_installing_GNU_Radio_from_source_code
>
>
>
> Marcus D. Leech via USRP-users <[email protected]>, 5 Eki 2018
> Cum, 17:17 tarihinde şunu yazdı:
>
>> On 10/05/2018 10:09 AM, ogün levent via USRP-users wrote:
>>
>> Hi there,
>>
>> Thanks for the replies. I reinstalled ubuntu 16.04(removed SoapyUHD
>> packages) did a clean install and checked everything. Still having the
>> problem. There is a photo in the attachments.
>>
>> Regards.
>>
>> Could you point us to the exact procedure that you used to install?
>>
>>
>>
>> Paul Thevenon via USRP-users <[email protected]>, 5 Eki 2018
>> Cum, 10:49 tarihinde şunu yazdı:
>>
>>> Hi, I went through the same difficulties and here is what solved this
>>> issue:
>>> - I deleted all the images from the /usr/local/share/uhd/images/ folder
>>> - I manually downloaded some older version, available on
>>> files.ettus.com/binaries/images. I chose the file
>>> uhd-images_3.11.0.git-227-g9277fc58.zip
>>> - I extracted it in the previous folder
>>> - I tried to run a simple flowgraph on gnuradio-companion. I saw the
>>> firmware upload, but it did not work.
>>> - Then, I don't remember precisely what was needed, but I
>>> unplugged/repluged everything, restarted the computer or just
>>> gnuradio-companion, and it worked!
>>>
>>> Hope it helps!
>>>
>>> Paul
>>>
>>> On 03-Oct-18 5:13 PM, Marcus D. Leech via USRP-users wrote:
>>>
>>> On 10/03/2018 11:03 AM, ogün levent wrote:
>>>
>>> Warning message can be seen in the attachments.
>>>
>>> I'm going to guess that you have two different installations of UHD on
>>> your system, or a "half-and-half" situation.
>>>
>>> Did you get any errors when you ran uhd_images_downloader?
>>>
>>>
>>>
>>> ogün levent <[email protected]>, 3 Eki 2018 Çar, 17:54 tarihinde
>>> şunu yazdı:
>>>
>>>> Yes. We are trying to run the brand new device for the first time.
>>>>
>>>> Marcus D. Leech via USRP-users <[email protected]>, 3 Eki
>>>> 2018 Çar, 17:52 tarihinde şunu yazdı:
>>>>
>>>>> On 10/03/2018 10:45 AM, ogün levent via USRP-users wrote:
>>>>> > Hello there,
>>>>> >
>>>>> > Recently I received B210 and went through the installation guide on
>>>>> > the ettus website and loaded fpga images uhd_images_downloader and
>>>>> > everything seemed fine. When I tried to run a flowgraph I recieved
>>>>> > Runtime error. Is it because of the fpga image version? If so is it
>>>>> > possible to change fpga .bin file? How can I solve the problem?
>>>>> >
>>>>> > Best
>>>>> >
>>>>> Did you power-cycle your USRP after loading new images?
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> USRP-users mailing list
>>>>> [email protected]
>>>>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>>>>>
>>>>
>>>
>>>
>>> _______________________________________________
>>> USRP-users mailing 
>>> [email protected]http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>>>
>>>
>>> _______________________________________________
>>> USRP-users mailing list
>>> [email protected]
>>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>>>
>>
>>
>> _______________________________________________
>> USRP-users mailing 
>> [email protected]http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>>
>>
>> _______________________________________________
>> USRP-users mailing list
>> [email protected]
>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>>
>
>
_______________________________________________
USRP-users mailing list
[email protected]
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

Reply via email to