Wow, okay; that’s disheartening. Thanks much for the info, Jason. Nope, the Rev3 bit file doesn’t work; tried it. I’ll see if the support email adr can be of use.
Joe > On May 8, 2019, at 10:44 AM, Jason Matusiak <ja...@gardettoengineering.com> > wrote: > > Joe, I think you might be SOL. If you take a look at this thread from me > last year, I had no luck: > http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/2018-April/056223.html > > <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/2018-April/056223.html> > > > Also, when I pinged Ettus directly, here is some info I got back from them > (from two different emails in the thread): > "we've been having some trouble tracking down Rev2 bitfiles, because no > one here was around when that was built. If you're trying to unbrick > them, Rev3 bitfiles might be OK, but I'm not completely sure. > > supp...@ettus.com <mailto:supp...@ettus.com> might know more by know. > really sorry, but those Rev2s are just so old. And all the people from > that era seem to be gone. Sorry, can't help you with those Rev2s." > > From: USRP-users <usrp-users-boun...@lists.ettus.com > <mailto:usrp-users-boun...@lists.ettus.com>> on behalf of Joe Martin via > USRP-users <usrp-users@lists.ettus.com <mailto:usrp-users@lists.ettus.com>> > Sent: Wednesday, May 8, 2019 11:55 AM > To: Joe Martin via USRP-users > Subject: [USRP-users] Bringing an elderly N210 to life by loading current > firmware/fpga images > > I am trying to bring an elderly N210 r2.0 with unknown history to life by > loading current UHD firmware and fpga images from a 1Gigabit ethernet > connection on an AMD 2950X, 3.4GHz, 2TB SSD PC running Ubuntu 18.04 with UHD > 3.14.0.HEAD-0-gd20a7ae2 software but having difficulty. > > Following instructions in “USRP Hardware Driver and USRP Manual: USRP2 and > N2x0 Series”: > > My initial action was to load the “usrp_n210_r4_fpga.bit" file into the N210 > xc3sd3400a FPGA using a Xilinx Platform Cable USB II JTAG programming cable > from a Win7 PC running Xilinx ISE iMPACT, which reported “Program Succeeded” > for the action. Ethernet LEDs on the N210 are variously lighted showing > activity on the connection port. > > With the N210 connected to the Linux PC 1Gbps ethernet port, issuing the > following commands result in the responses shown in the screenshot image > below: > > <Screenshot from 2019-05-08 08-46-52.png> > > My (naive!) interpretation of the above responses is that the FPGA may not > actually have been programmed with the *.bit code even though iMPACT reported > success in programming. Can someone assist me in understanding whether my > interpretation is correct or not and, most importantly, suggest what I might > try next to bring this N210 to life? > > The “Please run:” suggestion results in the “Received invalid reply 32 from > device” error. It seems no matter what I try the “Received invalid reply 32 > from device” RuntimeError is reported back when I try to load any new > firmware/FPGA images. > > Thanks! > > Joe
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
