Well, it's not a rev 4. It's either 2 or 3 in terms of hardware revision.

On Thu, May 9, 2019 at 12:58 PM Joe Martin <[email protected]> wrote:

> …able to ping 192.168.10.2 successfully.
>
> On May 9, 2019, at 1:54 PM, Joe Martin <[email protected]> wrote:
>
> Ian,
>
> Yes, I have tried many times to boot in safe mode, same result
> regardless.  Yes, I am able to pin to 192.168.10.2 successfully.
>
> Joe
>
> On May 9, 2019, at 1:47 PM, Joe Martin via USRP-users <
> [email protected]> wrote:
>
> Ian and Nick,
>
> Thanks for the assistance.  Attached are dropbox links to two snapshot
> photos:  1) the factory label on the back of the N210, showing N210 r:2.0
> and 2) a top side view of the N210.
>
> 1) https://www.dropbox.com/s/u92x02rni71kfb3/20190509_133253.jpg?dl=0
> 2) https://www.dropbox.com/s/1p8ocqf4qcr9ohb/20190509_133800.jpg?dl=0
>
> Seems this unit is indeed a rev 2 N210, yes?
>
> Joe
>
> On May 9, 2019, at 12:40 PM, Nick Foster <[email protected]> wrote:
>
> Moreover, the best "tell" is to look at the N210 motherboard. If the SRAM
> chip is on the top side, it's a rev 2/3. If the SRAM is on the bottom side,
> it's a rev 4. If you send a picture along of the top of the N210, I can
> tell you if it's early or late rev.
>
> On Thu, May 9, 2019 at 11:36 AM Ian Buckley via USRP-users <
> [email protected]> wrote:
>
>> Joe,
>> So I scratched my head about this a little late last night and looked
>> back through the development repository for the N210 and as far as I can
>> tell there was never customer facing FPGA code for a Rev2 N210. Chatting
>> with Matt this morning he shared my feeling that a Rev2 wasn't sold to
>> customers, so I'm curious if you have a unit that has a factory label that
>> says N210Rev2 or if you have seen "usrp2 rev2.0" on the PCB (which can be
>> missleading).
>>
>> Also have you tried booting into the safe image and verifying that it at
>> least pings on 192.168.10.2?
>>
>> If we can conclusively identify which rev of h/w you have I can probably
>> help further.
>>
>> Ian
>>
>
> _______________________________________________
> USRP-users mailing list
> [email protected]
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
>
>
>
_______________________________________________
USRP-users mailing list
[email protected]
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

Reply via email to