Did Marcus' suggestion below about setting the start time fix the issue? On Fri, Jan 28, 2022 at 11:31 AM Paul Atreides <[email protected]> wrote:
> single > > On Fri, Jan 28, 2022 at 11:18 AM Marcus D. Leech <[email protected]> > wrote: > >> On 2022-01-28 10:38, Paul Atreides wrote: >> >> Rob, I’ve been able to extend the functionality of gr-uhd to include the >> enable switch for each LO distribution port. Thank you for the information. >> >> I am now having synchronization issues with the transmit stream in the >> GNURadio. It appears as though the radio channels are not starting at the >> same time. Are you aware of any commands that you’ve had to run from >> external applications that ensure the start time for both transmitters is >> the same? >> >> <end transmission> >> >> WHen specifying a "start time" in the GRC UHD Sink block of anything >= >> 0.0, this code is inserted into the generated Python: >> >> self.uhd_usrp_sink_0.set_start_time(uhd.time_spec(0.5)) >> >> Are you using a single 10GiGe link, or using dual links? >> >> >> >> >>
_______________________________________________ USRP-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
