On 2022-01-28 18:11, Paul Atreides wrote:
yes, set to 1.0
I suspect anything that's long enough to allow the streams to all arrive
at a notional "synchronization point" is enough.
On Fri, Jan 28, 2022 at 5:59 PM Rob Kossler <[email protected]> wrote:
Did Marcus' suggestion below about setting the start time fix the
issue?
On Fri, Jan 28, 2022 at 11:31 AM Paul Atreides
<[email protected]> wrote:
single
On Fri, Jan 28, 2022 at 11:18 AM Marcus D. Leech
<[email protected]> wrote:
On 2022-01-28 10:38, Paul Atreides wrote:
Rob, I’ve been able to extend the functionality of gr-uhd
to include the enable switch for each LO distribution
port. Thank you for the information.
I am now having synchronization issues with the transmit
stream in the GNURadio. It appears as though the radio
channels are not starting at the same time. Are you aware
of any commands that you’ve had to run from external
applications that ensure the start time for both
transmitters is the same?
<end transmission>
WHen specifying a "start time" in the GRC UHD Sink block
of anything >= 0.0, this code is inserted into the
generated Python:
self.uhd_usrp_sink_0.set_start_time(uhd.time_spec(0.5))
Are you using a single 10GiGe link, or using dual links?
_______________________________________________
USRP-users mailing list -- [email protected]
To unsubscribe send an email to [email protected]
