yes, set to 1.0 On Fri, Jan 28, 2022 at 5:59 PM Rob Kossler <[email protected]> wrote:
> Did Marcus' suggestion below about setting the start time fix the issue? > > On Fri, Jan 28, 2022 at 11:31 AM Paul Atreides <[email protected]> > wrote: > >> single >> >> On Fri, Jan 28, 2022 at 11:18 AM Marcus D. Leech <[email protected]> >> wrote: >> >>> On 2022-01-28 10:38, Paul Atreides wrote: >>> >>> Rob, I’ve been able to extend the functionality of gr-uhd to include the >>> enable switch for each LO distribution port. Thank you for the information. >>> >>> I am now having synchronization issues with the transmit stream in the >>> GNURadio. It appears as though the radio channels are not starting at the >>> same time. Are you aware of any commands that you’ve had to run from >>> external applications that ensure the start time for both transmitters is >>> the same? >>> >>> <end transmission> >>> >>> WHen specifying a "start time" in the GRC UHD Sink block of anything >= >>> 0.0, this code is inserted into the generated Python: >>> >>> self.uhd_usrp_sink_0.set_start_time(uhd.time_spec(0.5)) >>> >>> Are you using a single 10GiGe link, or using dual links? >>> >>> >>> >>> >>>
_______________________________________________ USRP-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
