Thank you very much.
This (attached) is the log files.
Any ideas?
Il 15/2/22 3:16, [email protected] ha scritto:
Please try this “sudo ./nr-softmodem -O
../../../ci-scripts/conf_files/gnb.band78.tm1.106PRB.usrpn300.conf
--sa --args clock_source=internal || sudo tee files_log.txt”
谢谢，有任何问题请随时与我联系！
——————————————————————
李泽远|研发工程师
北京曾益科技有限公司
手机：13121162044
地址：北京市海淀区中关村大街中关村SOHO 1108
网址：_www.zengyi-tech.com <http://www.zengyi-tech.com>_
*发件人:*Giuseppe Santaromita <[email protected]>
*发送时间:*2022年2月15日2:02
*收件人:*[email protected]
*主题:*[USRP-users] OAI with USRP N310
Dear community,
I would like to use OpenAirInterface with the USRP N310 and I am
having overflow problems. I am forwarding here the email I sent to the
OAI mail list, because I think the problem is with the USRP and
non-real time operations.
Does anyone have any ideas?
Thanks in advance,
Giuseppe
Dear community,
After solving problems with OAI installation and USRP N310
configuration, I am trying to create a 5G SA link, starting with gNB.
I tried this:
sudo ./nr-softmodem -O
../../../ci-scripts/conf_files/gnb.band78.tm1.106PRB.usrpn300.conf
--sa --args clock_source=internal
But it gives problems that I think are related to the fact that
probably the operations are not in real time.
For example:
[PHY] rx_rf: Asked for 30720 samples, got 18906 from USRP
[PHY] problem receiving samples
LLLLLLLLLLLLLLLLLLLLLLLLLLLO[HW] [recv] received 18906 samples out
of 30720
[HW] Time: 1.41826 s
ERROR_CODE_OVERFLOW (Overflow)
Or, even earlier:
[WARNING] [MPM.RPCServer] A timeout event occured!
Also, I would like to attach a log file but I can't find it, and
using the "> file_log.txt" at the end of the command it all goes
immediately in overflow.
Does anyone have any ideas?
[HW] # /dev/cpu_dma_latency set to 2 us
[0m[ENB_APP] nfapi running mode: MONOLITHIC
[0m[GNB_APP] Getting GNBSParams
[0m[ITTI] Starting itti queue: TASK_UNKNOWN as task 0
[0m[ITTI] Starting itti queue: TASK_TIMER as task 1
[0m[ITTI] Starting itti queue: TASK_L2L1 as task 2
[0m[ITTI] Starting itti queue: TASK_BM as task 3
[0m[ITTI] Starting itti queue: TASK_PHY_ENB as task 4
[0m[ITTI] Starting itti queue: TASK_MAC_ENB as task 5
[0m[ITTI] Starting itti queue: TASK_RLC_ENB as task 6
[0m[ITTI] Starting itti queue: TASK_RRC_ENB_NB_IoT as task 7
[0m[ITTI] Starting itti queue: TASK_PDCP_ENB as task 8
[0m[ITTI] Starting itti queue: TASK_DATA_FORWARDING as task 9
[0m[ITTI] Starting itti queue: TASK_END_MARKER as task 10
[0m[ITTI] Starting itti queue: TASK_RRC_ENB as task 11
[0m[ITTI] Starting itti queue: TASK_RRC_GNB as task 12
[0m[ITTI] Starting itti queue: TASK_RAL_ENB as task 13
[0m[ITTI] Starting itti queue: TASK_S1AP as task 14
[0m[ITTI] Starting itti queue: TASK_NGAP as task 15
[0m[ITTI] Starting itti queue: TASK_X2AP as task 16
[0m[ITTI] Starting itti queue: TASK_M2AP_ENB as task 17
[0m[ITTI] Starting itti queue: TASK_M2AP_MCE as task 18
[0m[ITTI] Starting itti queue: TASK_M3AP as task 19
[0m[ITTI] Starting itti queue: TASK_M3AP_MME as task 20
[0m[ITTI] Starting itti queue: TASK_M3AP_MCE as task 21
[0m[ITTI] Starting itti queue: TASK_SCTP as task 22
[0m[ITTI] Starting itti queue: TASK_ENB_APP as task 23
[0m[ITTI] Starting itti queue: TASK_GNB_APP as task 24
[0m[ITTI] Starting itti queue: TASK_MCE_APP as task 25
[0m[ITTI] Starting itti queue: TASK_MME_APP as task 26
[0m[ITTI] Starting itti queue: TASK_FLEXRAN_AGENT as task 27
[0m[ITTI] Starting itti queue: TASK_PHY_UE as task 28
[0m[ITTI] Starting itti queue: TASK_MAC_UE as task 29
[0m[ITTI] Starting itti queue: TASK_RLC_UE as task 30
[0m[ITTI] Starting itti queue: TASK_PDCP_UE as task 31
[0m[ITTI] Starting itti queue: TASK_RRC_UE as task 32
[0m[ITTI] Starting itti queue: TASK_RRC_NRUE as task 33
[0m[ITTI] Starting itti queue: TASK_NAS_UE as task 34
[0m[ITTI] Starting itti queue: TASK_RAL_UE as task 35
[0m[ITTI] Starting itti queue: TASK_MSC as task 36
[0m[ITTI] Starting itti queue: TASK_GTPV1_U as task 37
[0m[ITTI] Starting itti queue: OCP_GTPV1_U as task 38
[0m[ITTI] Starting itti queue: TASK_UDP as task 39
[0m[ITTI] Starting itti queue: TASK_CU_F1 as task 40
[0m[ITTI] Starting itti queue: TASK_DU_F1 as task 41
[0m[ITTI] Starting itti queue: TASK_RRC_UE_SIM as task 42
[0m[ITTI] Starting itti queue: TASK_RRC_GNB_SIM as task 43
[0m[ITTI] Starting itti queue: TASK_RRC_NSA_UE as task 44
[0m[ITTI] Starting itti queue: TASK_RRC_NSA_NRUE as task 45
[0m[ITTI] Starting itti queue: TASK_NAS_NRUE as task 46
[0m[OPT] OPT disabled
[0m[HW] Version: Branch: develop Abrev. Hash: 1ed58f65b7 Date: Tue Feb 8
14:11:17 2022 +0000
[0m[NR_PHY] PRB blacklist
[0m[NR_PHY] RC.gNB = 0x55a8bef2f350
[0m[NR_PHY] RC.gNB[0] = 0x7f5f5810b010
[0m[NR_PHY] Copying 0 blacklisted PRB to L1 context
[0m[PHY] l1_north_init_gNB() RC.nb_nr_L1_inst:1
[0m[PHY] Installing callbacks for IF_Module - UL_indication
[0m[MAC] Allocating shared L1/L2 interface structure for instance 0 @
0x55a8bef31510
[0m[PHY] l1_north_init_gNB() RC.gNB[0] installing callbacks
[0m[SCTP] Starting SCTP layer
[0m[ITTI] Created Posix thread TASK_SCTP
[0m[X2AP] X2AP is disabled.
[0m[1;31m[NGAP] No configuration in the file.
[0m[1;31m[NGAP] No configuration in the file.
[0m[NGAP] Ngap task not created
[0m[PHY] gNB_app_task() Task ready initialize structures
[0m[ITTI] Created Posix thread TASK_GNB_APP
[0m[NR_RRC] Creating NR RRC gNB Task
[0m[NR_PHY] PRB blacklist
[0m[NR_PHY] Copying 0 blacklisted PRB to L1 context
[0m[PHY] l1_north_init_gNB() RC.nb_nr_L1_inst:1
[0m[PHY] Installing callbacks for IF_Module - UL_indication
[0m[PHY] l1_north_init_gNB() RC.gNB[0] installing callbacks
[0m[MAC] [MAIN] Init function start:nb_nr_macrlc_inst=1
[0m[NR_RRC] Entering main loop of NR_RRC message task
[0m[ITTI] Created Posix thread TASK_RRC_GNB
[0m[PHY] Installing callbacks for IF_Module - UL_indication
[0m[NR_MAC] PUSCH Target 200, PUCCH Target 150, PUCCH Failure 10, PUSCH
Failure 10
[0m[NR_MAC] Blacklisted PRBS 0
[0m[PHY] gNB_app_task() RC.nb_nr_L1_inst:1
[0m[PHY] l1_north_init_gNB() RC.nb_nr_L1_inst:1
[0m[PHY] Installing callbacks for IF_Module - UL_indication
[0m[PHY] l1_north_init_gNB() RC.gNB[0] installing callbacks
[0m[GNB_APP] Allocating gNB_RRC_INST for 1 instances
[0m[PHY] gNB_app_task() RC.nb_nr_inst:1 RC.nrrrc:0x7f5f50006380
[0m[ITTI] Created Posix thread TASK_GTPV1_U
[0m[PHY] gNB_app_task() Creating RRC instance RC.nrrrc[0]:0x7f5f500063a0 (1
of 1)
[0m[RRC] Read in ServingCellConfigCommon (PhysCellId 0, ABSFREQSSB 641032,
DLBand 78, ABSFREQPOINTA 640000, DLBW 106,RACH_TargetReceivedPower -118
[0m[NR_MAC] NR band duplex spacing is 0 KHz (nr_bandtable[37].band = 78)
[0m[NR_MAC] NR band 78, duplex mode TDD, duplex spacing = 0 KHz
[0m[RRC] DL PTRS frequencyDensity 1 not set. Assuming PTRS not present!
[0m[RRC] UL PTRS frequencyDensity 1 not set. Assuming PTRS not present!
[0m[NR_RRC] Setting node_type to ngran_gNB
[0m[GNB_APP] RRC starting with node type 2
[0m[GNB_APP] Sending configuration message to NR_RRC task
[0m[PDCP] pdcp init,usegtp
[0m[PDCP] node is gNB
[0m[GTPU] Configuring GTPu
[0m[NR_RRC] Received message NRRRC_CONFIGURATION_REQ
[0m[NR_RRC] [gNB 0] Received NRRRC_CONFIGURATION_REQ : 0x7f5f50007af0
[0m[NR_RRC] [FRAME 00000][gNB][MOD 00][RNTI 0] Init...
[0m[GTPU] NSA mode
[0m[GTPU] Configuring GTPu address : 192.168.12.111 -> 6f0ca8c0
[0m[GNB_APP] [gNB 0] gNB_app_register for instance 0
[0m[GTPU] Initializing UDP for local address 192.168.12.111 with port 2152
[0m[93m[GTPU] bind: Cannot assign requested address
[0m[1;31m[GTPU] failed to bind socket: 192.168.12.111 2152
[0m[1;31m[GTPU] can't create GTP-U instance
[0m[GTPU] Created gtpu instance id: -1
[0m[NR_MAC] NR band duplex spacing is 0 KHz (nr_bandtable[37].band = 78)
[0m[NR_MAC] NR band 78, duplex mode TDD, duplex spacing = 0 KHz
[0m[NR_RRC] [FRAME 00000][gNB][MOD 00][RNTI 0] Checking release
[0m[NR_RRC] SIB1 freq: absoluteFrequencySSB 641032, absoluteFrequencyPointA
640000
[0m[NR_RRC] SIB1 freq: absolute_diff 1032, 2*(absolute_diff/(12*2) - 10) 66
[0mCMDLINE: "./nr-softmodem" "-O"
"../../../ci-scripts/conf_files/gnb.band78.tm1.106PRB.usrpn300-2.conf" "--sa"
"--args" "clock_source=internal"
[CONFIG] get parameters from libconfig
../../../ci-scripts/conf_files/gnb.band78.tm1.106PRB.usrpn300-2.conf , debug
flags: 0x00000000
[LIBCONFIG] Path for include directive set to: ../../../ci-scripts/conf_files
[CONFIG] function config_libconfig_init returned 0
[CONFIG] config module libconfig loaded
[LIBCONFIG] config: 1/1 parameters successfully set, (1 to default value)
[LIBCONFIG] log_config: 3/3 parameters successfully set, (1 to default value)
[LIBCONFIG] log_config: 55/55 parameters successfully set, (49 to default value)
[LIBCONFIG] log_config: 55/55 parameters successfully set, (55 to default value)
[LIBCONFIG] log_config: 16/16 parameters successfully set, (16 to default value)
[LIBCONFIG] log_config: 16/16 parameters successfully set, (16 to default value)
log init done
Reading in command-line options
[LIBCONFIG] (root): 34/34 parameters successfully set, (30 to default value)
[LIBCONFIG] (root): 6/6 parameters successfully set, (5 to default value)
[LIBCONFIG] (root): 2/2 parameters successfully set, (0 to default value)
[LIBCONFIG] THREAD_STRUCT.[0]: 2/2 parameters successfully set, (0 to default
value)
[LIBCONFIG] THREAD_STRUCT.[0]: 2/2 parameters successfully set, (0 to default
value)
[CONFIG] parallel_conf is set to 2
[CONFIG] worker_conf is set to 1
Configuration: nb_rrc_inst 1, nb_nr_L1_inst 1, nb_ru 1
[LIBCONFIG] TTracer: 4/4 parameters successfully set, (4 to default value)
configuring for RAU/RRU
CPU Freq is 2.394601
[LIBCONFIG] opt: 3/3 parameters successfully set, (3 to default value)
[LIBCONFIG] (root): 2/2 parameters successfully set, (0 to default value)
[LIBCONFIG] gNBs.[0]: 22/22 parameters successfully set, (11 to default value)
[LIBCONFIG] L1s.[0]: 14/14 parameters successfully set, (11 to default value)
Initializing northbound interface for L1
[LIBCONFIG] eNBs.[0]: 1/1 parameters successfully set, (1 to default value)
[LIBCONFIG] gNBs.[0]: 1/1 parameters successfully set, (1 to default value)
[LIBCONFIG] gNBs.[0].NETWORK_INTERFACES: 10/10 parameters successfully set, (3
to default value)
[LIBCONFIG] (root): 2/2 parameters successfully set, (0 to default value)
[LIBCONFIG] gNBs.[0]: 22/22 parameters successfully set, (11 to default value)
[LIBCONFIG] L1s.[0]: 14/14 parameters successfully set, (11 to default value)
Initializing northbound interface for L1
[LIBCONFIG] (root): 2/2 parameters successfully set, (0 to default value)
[LIBCONFIG] gNBs.[0]: 22/22 parameters successfully set, (11 to default value)
[LIBCONFIG] MACRLCs.[0]: 26/26 parameters successfully set, (23 to default
value)
[LIBCONFIG] (root): 2/2 parameters successfully set, (0 to default value)
[LIBCONFIG] gNBs.[0]: 22/22 parameters successfully set, (11 to default value)
[LIBCONFIG] list gNBs.[0].pdcch_ConfigSIB1 not found in config file
../../../ci-scripts/conf_files/gnb.band78.tm1.106PRB.usrpn300-2.conf
[LIBCONFIG] gNBs.[0].servingCellConfigCommon.[0]: 60/60 parameters successfully
set, (9 to default value)
[LIBCONFIG] list gNBs.[0].servingCellConfigDedicated not found in config file
../../../ci-scripts/conf_files/gnb.band78.tm1.106PRB.usrpn300-2.conf
NRRRC 0: Southbound Transport local_mac
[LIBCONFIG] gNBs.[0].plmn_list.[0]: 3/3 parameters successfully set, (0 to
default value)
SSB SCO 0
pdsch_AntennaPorts 1
pusch_AntennaPorts 1
minTXRXTIME 6
Do CSI-RS 0
[LIBCONFIG] security: 4/4 parameters successfully set, (0 to default value)
[LIBCONFIG] (root): 2/2 parameters successfully set, (0 to default value)
[LIBCONFIG] gNBs.[0].NETWORK_INTERFACES: 10/10 parameters successfully set, (3
to default value)
<SIB1>
<cellSelectionInfo>
<q-RxLevMin>-65</q-RxLevMin>
</cellSelectionInfo>
<cellAccessRelatedInfo>
<plmn-IdentityList>
<PLMN-IdentityInfo>
<plmn-IdentityList>
<PLMN-Identity>
<mcc>
<MCC-MNC-Digit>2</MCC-MNC-Digit>
<MCC-MNC-Digit>0</MCC-MNC-Digit>
<MCC-MNC-Digit>8</MCC-MNC-Digit>
</mcc>
<mnc>
<MCC-MNC-Digit>9</MCC-MNC-Digit>
<MCC-MNC-Digit>3</MCC-MNC-Digit>
</mnc>
</PLMN-Identity>
</plmn-IdentityList>
<trackingAreaCode>
000000000000000000000001
</trackingAreaCode>
<cellIdentity>
000000000000000000000000111000000000
</cellIdentity>
<cellReservedForOperatorUse><notReserved/></cellReservedForOperatorUse>
</PLMN-IdentityInfo>
</plmn-IdentityList>
</cellAccessRelatedInfo>
<servingCellConfigCommon>
<downlinkConfigCommon>
<frequencyInfoDL>
<frequencyBandList>
<NR-MultiBandInfo>
<freqBandIndicatorNR>78</freqBandIndicatorNR>
</NR-MultiBandInfo>
</frequencyBandList>
<offsetToPointA>66</offsetToPointA>
<scs-SpecificCarrierList>
<SCS-SpecificCarrier>
<offsetToCarrier>0</offsetToCarrier>
<subcarrierSpacing><kHz30/></subcarrierSpacing>
<carrierBandwidth>106</carrierBandwidth>
</SCS-SpecificCarrier>
</scs-SpecificCarrierList>
</frequencyInfoDL>
<initialDownlinkBWP>
<genericParameters>
<locationAndBandwidth>6368</locationAndBandwidth>
<subcarrierSpacing><kHz30/></subcarrierSpacing>
</genericParameters>
<pdcch-ConfigCommon>
<setup>
<controlResourceSetZero>12</controlResourceSetZero>
<searchSpaceZero>0</searchSpaceZero>
<commonSearchSpaceList>
<SearchSpace>
<searchSpaceId>1</searchSpaceId>
<controlResourceSetId>0</controlResourceSetId>
<monitoringSlotPeriodicityAndOffset>
<sl1></sl1>
</monitoringSlotPeriodicityAndOffset>
<monitoringSymbolsWithinSlot>
10000000000000
</monitoringSymbolsWithinSlot>
<nrofCandidates>
<aggregationLevel1><n0/></aggregationLevel1>
<aggregationLevel2><n0/></aggregationLevel2>
<aggregationLevel4><n2/></aggregationLevel4>
<aggregationLevel8><n0/></aggregationLevel8>
<aggregationLevel16><n0/></aggregationLevel16>
</nrofCandidates>
<searchSpaceType>
<common>
<dci-Format0-0-AndFormat1-0>
</dci-Format0-0-AndFormat1-0>
</common>
</searchSpaceType>
</SearchSpace>
<SearchSpace>
<searchSpaceId>5</searchSpaceId>
<controlResourceSetId>0</controlResourceSetId>
<monitoringSlotPeriodicityAndOffset>
<sl5>0</sl5>
</monitoringSlotPeriodicityAndOffset>
<duration>2</duration>
<monitoringSymbolsWithinSlot>
10000000000000
</monitoringSymbolsWithinSlot>
<nrofCandidates>
<aggregationLevel1><n0/></aggregationLevel1>
<aggregationLevel2><n0/></aggregationLevel2>
<aggregationLevel4><n4/></aggregationLevel4>
<aggregationLevel8><n2/></aggregationLevel8>
<aggregationLevel16><n1/></aggregationLevel16>
</nrofCandidates>
<searchSpaceType>
<common>
<dci-Format0-0-AndFormat1-0>
</dci-Format0-0-AndFormat1-0>
</common>
</searchSpaceType>
</SearchSpace>
<SearchSpace>
<searchSpaceId>7</searchSpaceId>
<controlResourceSetId>0</controlResourceSetId>
<monitoringSlotPeriodicityAndOffset>
<sl1></sl1>
</monitoringSlotPeriodicityAndOffset>
<monitoringSymbolsWithinSlot>
10000000000000
</monitoringSymbolsWithinSlot>
<nrofCandidates>
<aggregationLevel1><n0/></aggregationLevel1>
<aggregationLevel2><n0/></aggregationLevel2>
<aggregationLevel4><n4/></aggregationLevel4>
<aggregationLevel8><n2/></aggregationLevel8>
<aggregationLevel16><n1/></aggregationLevel16>
</nrofCandidates>
<searchSpaceType>
<common>
<dci-Format0-0-AndFormat1-0>
</dci-Format0-0-AndFormat1-0>
</common>
</searchSpaceType>
</SearchSpace>
</commonSearchSpaceList>
<searchSpaceSIB1>0</searchSpaceSIB1>
<searchSpaceOtherSystemInformation>7</searchSpaceOtherSystemInformation>
<pagingSearchSpace>5</pagingSearchSpace>
<ra-SearchSpace>1</ra-SearchSpace>
</setup>
</pdcch-ConfigCommon>
<pdsch-ConfigCommon>
<setup>
<pdsch-TimeDomainAllocationList>
<PDSCH-TimeDomainResourceAllocation>
<mappingType><typeA/></mappingType>
<startSymbolAndLength>40</startSymbolAndLength>
</PDSCH-TimeDomainResourceAllocation>
<PDSCH-TimeDomainResourceAllocation>
<mappingType><typeA/></mappingType>
<startSymbolAndLength>57</startSymbolAndLength>
</PDSCH-TimeDomainResourceAllocation>
</pdsch-TimeDomainAllocationList>
</setup>
</pdsch-ConfigCommon>
</initialDownlinkBWP>
<bcch-Config>
<modificationPeriodCoeff><n2/></modificationPeriodCoeff>
</bcch-Config>
<pcch-Config>
<defaultPagingCycle><rf256/></defaultPagingCycle>
<nAndPagingFrameOffset>
<quarterT>1</quarterT>
</nAndPagingFrameOffset>
<ns><one/></ns>
<firstPDCCH-MonitoringOccasionOfPO>
<sCS120KHZoneT-SCS60KHZhalfT-SCS30KHZquarterT-SCS15KHZoneEighthT>
<INTEGER>0</INTEGER>
</sCS120KHZoneT-SCS60KHZhalfT-SCS30KHZquarterT-SCS15KHZoneEighthT>
</firstPDCCH-MonitoringOccasionOfPO>
</pcch-Config>
</downlinkConfigCommon>
<uplinkConfigCommon>
<frequencyInfoUL>
<scs-SpecificCarrierList>
<SCS-SpecificCarrier>
<offsetToCarrier>0</offsetToCarrier>
<subcarrierSpacing><kHz30/></subcarrierSpacing>
<carrierBandwidth>106</carrierBandwidth>
</SCS-SpecificCarrier>
</scs-SpecificCarrierList>
<p-Max>23</p-Max>
</frequencyInfoUL>
<initialUplinkBWP>
<genericParameters>
<locationAndBandwidth>6368</locationAndBandwidth>
<subcarrierSpacing><kHz30/></subcarrierSpacing>
</genericParameters>
<rach-ConfigCommon>
<setup>
<rach-ConfigGeneric>
<prach-ConfigurationIndex>98</prach-ConfigurationIndex>
<msg1-FDM><one/></msg1-FDM>
<msg1-FrequencyStart>0</msg1-FrequencyStart>
<zeroCorrelationZoneConfig>13</zeroCorrelationZoneConfig>
<preambleReceivedTargetPower>-118</preambleReceivedTargetPower>
<preambleTransMax><n10/></preambleTransMax>
<powerRampingStep><dB2/></powerRampingStep>
<ra-ResponseWindow><sl10/></ra-ResponseWindow>
</rach-ConfigGeneric>
<ssb-perRACH-OccasionAndCB-PreamblesPerSSB>
<one><n64/></one>
</ssb-perRACH-OccasionAndCB-PreamblesPerSSB>
<ra-ContentionResolutionTimer><sf64/></ra-ContentionResolutionTimer>
<rsrp-ThresholdSSB>19</rsrp-ThresholdSSB>
<prach-RootSequenceIndex>
<l139>1</l139>
</prach-RootSequenceIndex>
<msg1-SubcarrierSpacing><kHz30/></msg1-SubcarrierSpacing>
<restrictedSetConfig><unrestrictedSet/></restrictedSetConfig>
</setup>
</rach-ConfigCommon>
<pusch-ConfigCommon>
<setup>
<pusch-TimeDomainAllocationList>
<PUSCH-TimeDomainResourceAllocation>
<k2>6</k2>
<mappingType><typeB/></mappingType>
<startSymbolAndLength>41</startSymbolAndLength>
</PUSCH-TimeDomainResourceAllocation>
<PUSCH-TimeDomainResourceAllocation>
<k2>6</k2>
<mappingType><typeB/></mappingType>
<startSymbolAndLength>38</startSymbolAndLength>
</PUSCH-TimeDomainResourceAllocation>
<PUSCH-TimeDomainResourceAllocation>
<k2>7</k2>
<mappingType><typeB/></mappingType>
<startSymbolAndLength>38</startSymbolAndLength>
</PUSCH-TimeDomainResourceAllocation>
</pusch-TimeDomainAllocationList>
<msg3-DeltaPreamble>1</msg3-DeltaPreamble>
<p0-NominalWithGrant>-90</p0-NominalWithGrant>
</setup>
</pusch-ConfigCommon>
<pucch-ConfigCommon>
<setup>
<pucch-ResourceCommon>0</pucch-ResourceCommon>
<pucch-GroupHopping><neither/></pucch-GroupHopping>
<hoppingId>40</hoppingId>
<p0-nominal>-90</p0-nominal>
</setup>
</pucch-ConfigCommon>
</initialUplinkBWP>
<timeAlignmentTimerCommon><infinity/></timeAlignmentTimerCommon>
</uplinkConfigCommon>
<ssb-PositionsInBurst>
<inOneGroup>
10000000
</inOneGroup>
</ssb-PositionsInBurst>
<ssb-PeriodicityServingCell><ms20/></ssb-PeriodicityServingCell>
<tdd-UL-DL-ConfigurationCommon>
<referenceSubcarrierSpacing><kHz30/></referenceSubcarrierSpacing>
<pattern1>
<dl-UL-TransmissionPeriodicity><ms5/></dl-UL-TransmissionPeriodicity>
<nrofDownlinkSlots>7</nrofDownlinkSlots>
<nrofDownlinkSymbols>6</nrofDownlinkSymbols>
<nrofUplinkSlots>2</nrofUplinkSlots>
<nrofUplinkSymbols>4</nrofUplinkSymbols>
</pattern1>
</tdd-UL-DL-ConfigurationCommon>
<ss-PBCH-BlockPower>-25</ss-PBCH-BlockPower>
</servingCellConfigCommon>
<ue-TimersAndConstants>
<t300><ms400/></t300>
<t301><ms400/></t301>
<t310><ms2000/></t310>
<n310><n10/></n310>
<t311><ms3000/></t311>
<n311><n1/></n311>
<t319><ms400/></t319>
</ue-TimersAndConstants>
</SIB1>
[NR_RRC] do_SIB23_NR, size 9
[0m[NR_RRC] Done init_NR_SI
[0m[NR_MAC] Configuring common parameters from NR ServingCellConfig
[0m[NR_MAC] config_common() dl_BandwidthP:40
[0m[NR_MAC] NR band duplex spacing is 0 KHz (nr_bandtable[37].band = 78)
[0m[NR_MAC] Computing frequency (pointA 640000 => 3600000 KHz (freq_min
3300000 KHz, NR band 78 N_OFFs 620000))
[0m[NR_MAC] config_common() dl_BandwidthP:40
[0m[NR_MAC] NR band duplex spacing is 0 KHz (nr_bandtable[37].band = 78)
[0m[NR_MAC] Computing frequency (pointA 640000 => 3600000 KHz (freq_min
3300000 KHz, NR band 78 N_OFFs 620000))
[0m[NR_MAC] NR band duplex spacing is 0 KHz (nr_bandtable[37].band = 78)
[0m[NR_MAC] NR band 78, duplex mode TDD, duplex spacing = 0 KHz
[0m[NR_MAC] Set TX/RX antenna number to 1 (num ssb 1: 80000000,0)
[0m[NR_MAC] Setting TDD configuration period to 6
[0m[NR_MAC] TDD has been properly configurated
[0m[PHY] DL frequency 3619080000 Hz, UL frequency 3619080000 Hz: band 48,
uldl offset 0 Hz
[0m[32m[PHY] Configuring MIB for instance 0, : (Nid_cell 0,DL freq
3619080000, UL freq 3619080000)
[0m[PHY] Initializing frame parms for mu 1, N_RB 106, Ncp 0
[0m[PHY] Init: N_RB_DL 106, first_carrier_offset 1412, nb_prefix_samples
144,nb_prefix_samples0 176
[0m[PHY] Doing symbol rotation calculation for gNB TX/RX, f0
3619080000.000000 Hz, Nsymb 28
[0m[PHY] Symbol rotation 0/28 => (18204,-27245)
[0m[PHY] Symbol rotation 1/28 => tl 0.000036 (-23170,-23170) (0.375000)
[0m[PHY] Symbol rotation 2/28 => tl 0.000072 (-27245,18204) (0.593750)
[0m[PHY] Symbol rotation 3/28 => tl 0.000108 (12539,30272) (0.812500)
[0m[PHY] Symbol rotation 4/28 => tl 0.000143 (32137,-6393) (0.031250)
[0m[PHY] Symbol rotation 5/28 => tl 0.000179 (-1,-32767) (0.250000)
[0m[PHY] Symbol rotation 6/28 => tl 0.000215 (-32138,-6393) (0.468750)
[0m[PHY] Symbol rotation 7/28 => tl 0.000250 (-12540,30272) (0.687500)
[0m[PHY] Symbol rotation 8/28 => tl 0.000286 (27244,18204) (0.906250)
[0m[PHY] Symbol rotation 9/28 => tl 0.000322 (23169,-23170) (0.125000)
[0m[PHY] Symbol rotation 10/28 => tl 0.000357 (-18205,-27245) (0.343750)
[0m[PHY] Symbol rotation 11/28 => tl 0.000393 (-30273,12539) (0.562500)
[0m[PHY] Symbol rotation 12/28 => tl 0.000429 (6392,32137) (0.781250)
[0m[PHY] Symbol rotation 13/28 => tl 0.000464 (32767,0) (1.000000)
[0m[PHY] Symbol rotation 14/28 => tl 0.000500 (18204,-27245) (0.156250)
[0m[PHY] Symbol rotation 15/28 => tl 0.000536 (-23170,-23170) (0.375000)
[0m[PHY] Symbol rotation 16/28 => tl 0.000572 (-27245,18204) (0.593750)
[0m[PHY] Symbol rotation 17/28 => tl 0.000608 (12539,30272) (0.812500)
[0m[PHY] Symbol rotation 18/28 => tl 0.000643 (32137,-6393) (0.031250)
[0m[PHY] Symbol rotation 19/28 => tl 0.000679 (0,-32767) (0.250000)
[0m[PHY] Symbol rotation 20/28 => tl 0.000715 (-32138,-6393) (0.468750)
[0m[PHY] Symbol rotation 21/28 => tl 0.000750 (-12540,30272) (0.687500)
[0m[PHY] Symbol rotation 22/28 => tl 0.000786 (27244,18204) (0.906250)
[0m[PHY] Symbol rotation 23/28 => tl 0.000822 (23169,-23170) (0.125000)
[0m[PHY] Symbol rotation 24/28 => tl 0.000857 (-18205,-27245) (0.343750)
[0m[PHY] Symbol rotation 25/28 => tl 0.000893 (-30273,12539) (0.562500)
[0m[PHY] Symbol rotation 26/28 => tl 0.000929 (6392,32137) (0.781250)
[0m[PHY] Symbol rotation 27/28 => tl 0.000964 (32766,0) (1.000000)
[0m[PHY] Doing symbol rotation calculation for gNB TX/RX, f0
3619080000.000000 Hz, Nsymb 28
[0m[PHY] Symbol rotation 0/28 => (18204,-27245)
[0m[PHY] Symbol rotation 1/28 => tl 0.000036 (-23170,-23170) (0.375000)
[0m[PHY] Symbol rotation 2/28 => tl 0.000072 (-27245,18204) (0.593750)
[0m[PHY] Symbol rotation 3/28 => tl 0.000108 (12539,30272) (0.812500)
[0m[PHY] Symbol rotation 4/28 => tl 0.000143 (32137,-6393) (0.031250)
[0m[PHY] Symbol rotation 5/28 => tl 0.000179 (-1,-32767) (0.250000)
[0m[PHY] Symbol rotation 6/28 => tl 0.000215 (-32138,-6393) (0.468750)
[0m[PHY] Symbol rotation 7/28 => tl 0.000250 (-12540,30272) (0.687500)
[0m[PHY] Symbol rotation 8/28 => tl 0.000286 (27244,18204) (0.906250)
[0m[PHY] Symbol rotation 9/28 => tl 0.000322 (23169,-23170) (0.125000)
[0m[PHY] Initializing gNB 0 single_thread_flag:1
[0m[PHY] Symbol rotation 10/28 => tl 0.000357 (-18205,-27245) (0.343750)
[0m[PHY] Initializing gNB 0
[0m[PHY] Symbol rotation 11/28 => tl 0.000393 (-30273,12539) (0.562500)
[0m[PHY] Registering with MAC interface module (before 0x55a8bef31510)
[0m[PHY] Symbol rotation 12/28 => tl 0.000429 (6392,32137) (0.781250)
[0m[PHY] Installing callbacks for IF_Module - UL_indication
[0m[PHY] Symbol rotation 13/28 => tl 0.000464 (32767,0) (1.000000)
[0m[PHY] Registering with MAC interface module (after 0x55a8bef31510)
[0m[PHY] Symbol rotation 14/28 => tl 0.000500 (18204,-27245) (0.156250)
[0m[PHY] Setting indication lists
[0m[PHY] Symbol rotation 15/28 => tl 0.000536 (-23170,-23170) (0.375000)
[0m[PHY] [nr-gnb.c] gNB structure allocated
[0m[PHY] Symbol rotation 16/28 => tl 0.000572 (-27245,18204) (0.593750)
[0m[PHY] Symbol rotation 17/28 => tl 0.000608 (12539,30272) (0.812500)
[0m[PHY] Symbol rotation 18/28 => tl 0.000643 (32137,-6393) (0.031250)
[0m[PHY] Symbol rotation 19/28 => tl 0.000679 (0,-32767) (0.250000)
[0m[PHY] Symbol rotation 20/28 => tl 0.000715 (-32138,-6393) (0.468750)
[0m[PHY] Symbol rotation 21/28 => tl 0.000750 (-12540,30272) (0.687500)
[0m[PHY] Symbol rotation 22/28 => tl 0.000786 (27244,18204) (0.906250)
[0m[PHY] Symbol rotation 23/28 => tl 0.000822 (23169,-23170) (0.125000)
[0m[PHY] Symbol rotation 24/28 => tl 0.000857 (-18205,-27245) (0.343750)
[0m[PHY] Symbol rotation 25/28 => tl 0.000893 (-30273,12539) (0.562500)
[0m[PHY] Symbol rotation 26/28 => tl 0.000929 (6392,32137) (0.781250)
[0m[PHY] Symbol rotation 27/28 => tl 0.000964 (32766,0) (1.000000)
[0m[PHY] Timeshift symbol rotation 0 => (32767,0) 0.000000
[0m[PHY] Timeshift symbol rotation 1 => (32717,1809) -0.055223
[0m[PHY] Timeshift symbol rotation 2 => (32567,3612) -0.110447
[0m[PHY] Timeshift symbol rotation 3 => (32318,5404) -0.165670
[0m[PHY] Timeshift symbol rotation 4 => (31971,7179) -0.220893
[0m[PHY] Timeshift symbol rotation 5 => (31526,8933) -0.276117
[0m[PHY] Timeshift symbol rotation 6 => (30985,10659) -0.331340
[0m[PHY] Timeshift symbol rotation 7 => (30349,12353) -0.386563
[0m[PHY] Timeshift symbol rotation 8 => (29621,14010) -0.441786
[0m[PHY] Timeshift symbol rotation 9 => (28803,15623) -0.497010
[0m[PHY] gNB 0 configured
[0m[NR_MAC] Total available RO 3, num of active SSB 1: unused RO = 0
association_period 1 N_RA_sfn 1 total_prach_occasions_per_config_period 3
[0m[NR_RRC] [FRAME 00000][gNB][MOD 00][RNTI 0] gNB:OPENAIR NR RRC IN....
[0m[PHY] RU clock source set as internal
[0m[PHY] Setting time source to internal
[0m[PHY] number of L1 instances 1, number of RU 1, number of CPU cores 56
[0m[1;31m[PHY] DJP - delete code above this
/home/giuseppe_santaromita/openairinterface5g/executables/nr-ru.c:1932
[0m[PHY] Copying frame parms from gNB in RC to gNB 0 in ru 0 and frame_parms
in ru
[0m[PHY] Starting ru_thread 0
[0m[PHY] Initializing RU proc 0 (,synch_to_ext_device),
[0m[PHY] Starting RU 0 (,synch_to_ext_device),
[0m[PHY] Initializing frame parms for mu 1, N_RB 106, Ncp 0
[0m[PHY] Init: N_RB_DL 106, first_carrier_offset 1412, nb_prefix_samples
144,nb_prefix_samples0 176
[0m[PHY] fp->scs=30000
[0m[PHY] fp->ofdm_symbol_size=2048
[0m[PHY] fp->nb_prefix_samples0=176
[0m[PHY] fp->nb_prefix_samples=144
[0m[PHY] fp->slots_per_subframe=2
[0m[PHY] fp->samples_per_subframe_wCP=57344
[0m[PHY] fp->samples_per_frame_wCP=573440
[0m[PHY] fp->samples_per_subframe=61440
[0m[PHY] fp->samples_per_frame=614400
[0m[PHY] fp->dl_CarrierFreq=3619080000
[0m[PHY] fp->ul_CarrierFreq=3619080000
[0m[PHY] Channel 0: setting tx_gain offset 0.000000, rx_gain offset
50.000000, tx_freq 3619080000 Hz, rx_freq 3619080000 Hz
[0m[PHY] Initializing RU signal buffers (if_south local RF) nb_tx 1
[0m[PHY] [INIT] common.txdata[0] = 0x7f5f54543040 (2458880
bytes,sf_extension 320)
[0m[PHY] [INIT] common.txdata[0] = 0x7f5f54543540
[0m[PHY] nb_tx 1
[0m[PHY] rxdata_7_5kHz[0] 0x7f5f541f9040 for RU 0
[0m[PHY] [INIT] common.txdata_BF= 0x7f5f3c000b00 (8 bytes)
[0m[PHY] txdataF_BF[0] 0x7f5f541c0040 for RU 0
[0m[PHY] rxdataF[0] 0x7f5f5414f040 for RU 0
[0m[PHY] init feptx thread 0
[0m[PHY] [INIT] nr_phy_init_RU() ru->num_gNB:1
[0m[PHY] init feptx thread 1
[0m[PHY] Waiting for RUs to be configured ... RC.ru_mask:01
[0m[HW] openair0_cfg[0].sdr_addrs ==
'addr=192.168.10.2,mgmt_addr=192.168.10.2'
[0m[HW] openair0_cfg[0].clock_source == '0' (internal = 0, external = 1)
[0m[HW] UHD version 4.2.0.git-366-gcdcd39ae (4.2.0)
[0m[HW] Checking for USRP with args addr=192.168.10.2,mgmt_addr=192.168.10.2
[0m[HW] Found USRP n3xx
[0m[HW] Setting clock source to internal
[0m[HW] Setting time source to internal
[0mDL frequency 3619080000: band 48, UL frequency 3619080000
NFAPI MODE:MONOLITHIC
START MAIN THREADS
RC.nb_nr_L1_inst:1
Initializing gNB threads single_thread_flag:1 wait_for_sync:0
wait_gNBs()
Waiting for gNB L1 instances to all get configured ... sleeping 50ms
(nb_nr_sL1_inst 1)
gNB L1 are configured
About to Init RU threads RC.nb_RU:1
Initializing RU threads
configuring RU from file
[LIBCONFIG] RUs.[0]: 29/29 parameters successfully set, (17 to default value)
Set RU mask to 1
Creating RC.ru[0]:0x55a8bef33730
Setting function for RU 0 to gNodeB_3GPP
configuring ru_id 0 (start_rf 0x55a8bc7f6070)
[LIBCONFIG] device.recplay: 7/7 parameters successfully set, (7 to default
value)
[LIBCONFIG] device: 1/1 parameters successfully set, (1 to default value)
[LIBCONFIG] loader: 2/2 parameters successfully set, (2 to default value)
[LIBCONFIG] loader.oai_device: 2/2 parameters successfully set, (1 to default
value)
wait RUs
[LOADER] library liboai_device.so successfully loaded
Found USRP n300
[HW] device_init() sample_rate:61440000
[0m[HW] cal 0: freq 3500000000.000000, offset 0.000000, diff 119080000.000000
[0m[HW] cal 1: freq 2660000000.000000, offset 0.000000, diff 959080000.000000
[0m[HW] cal 2: freq 2300000000.000000, offset 0.000000, diff
1319080000.000000
[0m[HW] cal 3: freq 1880000000.000000, offset 0.000000, diff
1739080000.000000
[0m[HW] cal 4: freq 816000000.000000, offset 0.000000, diff 2803080000.000000
[0m[HW] RX Gain 0 50.000000 (0.000000) => 50.000000 (max 75.000000)
[0m[HW] USRP TX_GAIN:65.00 gain_range:65.00 tx_gain:0.00
[0m[HW] Actual master clock: 122.880000MHz...
[0m[HW] Actual clock source internal...
[0m[HW] Actual time source internal...
[0m[HW] RF board max packet size 364, size for 100µs jitter 6144
[0m[HW] rx_max_num_samps 364
[0m[HW] setting rx channel 0
[0m[HW] RX Channel 0
[0m[HW] Actual RX sample rate: 61.440000MSps...
[0m[HW] Actual RX frequency: 3.619080GHz...
[0m[HW] Actual RX gain: 50.000000...
[0m[HW] Actual RX bandwidth: 100.000000M...
[0m[HW] Actual RX antenna: RX2...
[0m[HW] TX Channel 0
[0m[HW] Actual TX sample rate: 61.440000MSps...
[0m[HW] Actual TX frequency: 3.619080GHz...
[0m[HW] Actual TX gain: 65.000000...
[0m[HW] Actual TX bandwidth: 100.000000M...
[0m[HW] Actual TX antenna: TX/RX...
[0m[HW] Actual TX packet size: 364
[0m[HW] Device timestamp: 1.324465...
[0m[HW] [RAU] has loaded USRP N300 device.
[0m[PHY] RU 0 Setting N_TA_offset to 800 samples (factor 2.000000, UL Freq
3600000, N_RB 106, mu 1)
[0m[PHY] Signaling main thread that RU 0 is ready, sf_ahead 3
[0m[PHY] RUs configured
[0m[PHY] init_eNB_afterRU() RC.nb_nr_inst:1
[0m[PHY] RC.nb_nr_CC[inst:0]:0x7f5f5810b010
[0m[PHY] [gNB 0] phy_init_nr_gNB() About to wait for gNB to be configured
[0m[PHY] Initialise nr transport
[0m[PHY] Allocating Transport Channel Buffers for PUCCH 0/16
[0m[PHY] Allocating Transport Channel Buffers for PUCCH 1/16
[0m[PHY] Allocating Transport Channel Buffers for PUCCH 2/16
[0m[PHY] Allocating Transport Channel Buffers for PUCCH 3/16
[0m[PHY] Allocating Transport Channel Buffers for PUCCH 4/16
[0m[PHY] Allocating Transport Channel Buffers for PUCCH 5/16
[0m[PHY] Allocating Transport Channel Buffers for PUCCH 6/16
[0m[PHY] Allocating Transport Channel Buffers for PUCCH 7/16
[0m[PHY] Allocating Transport Channel Buffers for PUCCH 8/16
[0m[PHY] Allocating Transport Channel Buffers for PUCCH 9/16
[0m[PHY] Allocating Transport Channel Buffers for PUCCH 10/16
[0m[PHY] Allocating Transport Channel Buffers for PUCCH 11/16
[0m[PHY] Allocating Transport Channel Buffers for PUCCH 12/16
[0m[PHY] Allocating Transport Channel Buffers for PUCCH 13/16
[0m[PHY] Allocating Transport Channel Buffers for PUCCH 14/16
[0m[PHY] Allocating Transport Channel Buffers for PUCCH 15/16
[0m[PHY] Allocating Transport Channel Buffer for ULSCH 0/8
[0m[PHY] Allocating Transport Channel Buffer for ULSCH 1/8
[0m[PHY] Allocating Transport Channel Buffer for ULSCH 2/8
[0m[PHY] Allocating Transport Channel Buffer for ULSCH 3/8
[0m[PHY] Allocating Transport Channel Buffer for ULSCH 4/8
[0m[PHY] Allocating Transport Channel Buffer for ULSCH 5/8
[0m[PHY] Allocating Transport Channel Buffer for ULSCH 6/8
[0m[PHY] Allocating Transport Channel Buffer for ULSCH 7/8
[0m[PHY] Mapping RX ports from 1 RUs to gNB 0
[0m[PHY] gNB->num_RU:1
[0m[PHY] Attaching RU 0 antenna 0 to gNB antenna 0
[0m[PHY] Number of threads requested in config file: 8, Number of threads
available on this machine: 56
[0m[PHY] Allocating Transport Channel Buffers for DLSCH 0/8
[0m[PHY] Allocating Transport Channel Buffers for DLSCH 1/8
[0m[PHY] Allocating Transport Channel Buffers for DLSCH 2/8
[0m[PHY] Allocating Transport Channel Buffers for DLSCH 3/8
[0m[PHY] Allocating Transport Channel Buffers for DLSCH 4/8
[0m[PHY] Allocating Transport Channel Buffers for DLSCH 5/8
[0m[PHY] Allocating Transport Channel Buffers for DLSCH 6/8
[0m[PHY] Allocating Transport Channel Buffers for DLSCH 7/8
[0m[PHY] Allocating Transport Channel Buffers for DLSCH 0/8
[0m[PHY] Allocating Transport Channel Buffers for DLSCH 1/8
[0m[PHY] Allocating Transport Channel Buffers for DLSCH 2/8
[0m[PHY] Allocating Transport Channel Buffers for DLSCH 3/8
[0m[PHY] Allocating Transport Channel Buffers for DLSCH 4/8
[0m[PHY] Allocating Transport Channel Buffers for DLSCH 5/8
[0m[PHY] Allocating Transport Channel Buffers for DLSCH 6/8
[0m[PHY] Allocating Transport Channel Buffers for DLSCH 7/8
[0msetup_RU_buffers: frame_parms = 0x7f5f5479c010
waiting for sync (ru_thread,-1/0x55a8bd4182b4,0x55a8be1c84e0,0x55a8be01d9c0)
RC.ru_mask:00
ALL RUs READY!
RC.nb_RU:1
ALL RUs ready - init gNBs
Not NFAPI mode - call init_eNB_afterRU()
[LIBCONFIG] loader.dfts: 2/2 parameters successfully set, (1 to default value)
[LOADER] library libdfts.so successfully loaded
[LIBCONFIG] loader.ldpc: 2/2 parameters successfully set, (1 to default value)
[LOADER] library libldpc.so successfully loaded
create a thread for core -1
create a thread for core -1
create a thread for core -1
create a thread for core -1
create a thread for core -1
create a thread for core -1
create a thread for core -1
create a thread for core -1
waiting for sync
(L1_stats_thread,-1/0x55a8bd4182b4,0x55a8be1c84e0,0x55a8be01d9c0)
ALL RUs ready - ALL gNBs ready
Sending sync to all threads
About to call end_configmodule() from main()
/home/giuseppe_santaromita/openairinterface5g/executables/nr-softmodem.c:818
Called end_configmodule() from main()
/home/giuseppe_santaromita/openairinterface5g/executables/nr-softmodem.c:823
TYPE <CTRL-C> TO TERMINATE
Entering ITTI signals handler
got sync (L1_stats_thread)
got sync (ru_thread)
[PHY] RU 0 rf device ready
[0msleep...
sleep...
sleep...
sleep...
sleep...
sleep...
sleep...
sleep...
sleep...
sleep...
sleep...
sleep...
[1;31m[HW] [recv] received 3474 samples out of 30720
[0m[1;31m[HW] Time: 1.05269 s
ERROR_CODE_OVERFLOW (Overflow)
[0m[1;31m[PHY] rx_rf: Asked for 30720 samples, got 3474 from USRP
[0m[1;31m[PHY] problem receiving samples
[0m[1;31m[HW] [recv] received 18906 samples out of 30720
[0m[1;31m[HW] Time: 1.10494 s
ERROR_CODE_OVERFLOW (Overflow)
[0m[1;31m[PHY] rx_rf: Asked for 30720 samples, got 18906 from USRP
[0m[1;31m[PHY] problem receiving samples
[0m[1;31m[HW] [recv] received 18906 samples out of 30720
[0m[1;31m[HW] Time: 1.15716 s
ERROR_CODE_OVERFLOW (Overflow)
[0m[1;31m[PHY] rx_rf: Asked for 30720 samples, got 18906 from USRP
[0m[1;31m[PHY] problem receiving samples
[0m[1;31m[HW] [recv] received 18906 samples out of 30720
[0m[1;31m[HW] Time: 1.20938 s
ERROR_CODE_OVERFLOW (Overflow)
[0m[1;31m[PHY] rx_rf: Asked for 30720 samples, got 18906 from USRP
[0m[1;31m[PHY] problem receiving samples
[0m[1;31m[HW] [recv] received 18906 samples out of 30720
[0m[1;31m[HW] Time: 1.26161 s
ERROR_CODE_OVERFLOW (Overflow)
[0m[1;31m[PHY] rx_rf: Asked for 30720 samples, got 18906 from USRP
[0m[1;31m[PHY] problem receiving samples
[0m[1;31m[HW] [recv] received 18906 samples out of 30720
[0m[1;31m[HW] Time: 1.31383 s
ERROR_CODE_OVERFLOW (Overflow)
[0m[1;31m[PHY] rx_rf: Asked for 30720 samples, got 18906 from USRP
[0m[1;31m[PHY] problem receiving samples
[0m[1;31m[HW] [recv] received 18906 samples out of 30720
[0m[1;31m[HW] Time: 1.36609 s
ERROR_CODE_OVERFLOW (Overflow)
[0m[1;31m[PHY] rx_rf: Asked for 30720 samples, got 18906 from USRP
[0m[1;31m[PHY] problem receiving samples
[0m[1;31m[HW] [recv] received 18906 samples out of 30720
[0m[1;31m[HW] Time: 1.41835 s
ERROR_CODE_OVERFLOW (Overflow)
[0m[1;31m[PHY] rx_rf: Asked for 30720 samples, got 18906 from USRP
[0m[1;31m[PHY] problem receiving samples
[0m[1;31m[HW] [recv] received 18906 samples out of 30720
[0m[1;31m[HW] Time: 1.47058 s
ERROR_CODE_OVERFLOW (Overflow)
[0m[1;31m[PHY] rx_rf: Asked for 30720 samples, got 18906 from USRP
[0m[1;31m[PHY] problem receiving samples
[0m[1;31m[HW] [recv] received 18906 samples out of 30720
[0m[1;31m[HW] Time: 1.52281 s
ERROR_CODE_OVERFLOW (Overflow)
[0m[1;31m[PHY] rx_rf: Asked for 30720 samples, got 18906 from USRP
[0m[1;31m[PHY] problem receiving samples
[0m[1;31m[HW] [recv] received 18906 samples out of 30720
[0m[1;31m[HW] Time: 1.57507 s
ERROR_CODE_OVERFLOW (Overflow)
[0m[1;31m[PHY] rx_rf: Asked for 30720 samples, got 18906 from USRP
[0m[1;31m[PHY] problem receiving samples
[0m[1;31m[HW] [recv] received 18906 samples out of 30720
[0m[1;31m[HW] Time: 1.62729 s
ERROR_CODE_OVERFLOW (Overflow)
[0m[1;31m[PHY] rx_rf: Asked for 30720 samples, got 18906 from USRP
[0m[1;31m[PHY] problem receiving samples
[0m[1;31m[HW] [recv] received 18906 samples out of 30720
[0m[1;31m[HW] Time: 1.67957 s
ERROR_CODE_OVERFLOW (Overflow)
[0m[1;31m[PHY] rx_rf: Asked for 30720 samples, got 18906 from USRP
[0m[1;31m[PHY] problem receiving samples
[0m[1;31m[HW] [recv] received 18906 samples out of 30720
[0m[1;31m[HW] Time: 1.73192 s
ERROR_CODE_OVERFLOW (Overflow)
[0m[1;31m[PHY] rx_rf: Asked for 30720 samples, got 18906 from USRP
[0m[1;31m[PHY] problem receiving samples
[0m[1;31m[HW] [recv] received 18906 samples out of 30720
[0m[1;31m[HW] Time: 1.78424 s
ERROR_CODE_OVERFLOW (Overflow)
[0m[1;31m[PHY] rx_rf: Asked for 30720 samples, got 18906 from USRP
[0m[1;31m[PHY] problem receiving samples
[0m[1;31m[HW] [recv] received 19270 samples out of 30720
[0m[1;31m[HW] Time: 1.8365 s
ERROR_CODE_OVERFLOW (Overflow)
[0m[1;31m[PHY] rx_rf: Asked for 30720 samples, got 19270 from USRP
[0m[1;31m[PHY] problem receiving samples
[0m[1;31m[HW] [recv] received 18542 samples out of 30720
[0m[1;31m[HW] Time: 1.88872 s
ERROR_CODE_OVERFLOW (Overflow)
[0m[1;31m[PHY] rx_rf: Asked for 30720 samples, got 18542 from USRP
[0m[1;31m[PHY] problem receiving samples
[0m_______________________________________________
USRP-users mailing list -- [email protected]
To unsubscribe send an email to [email protected]
