I don’t think that N310 supports 8 bit samples. If you want higher rates you must use a 10Gbe interface.
Sent from my iPhone > On Feb 15, 2022, at 10:30 AM, David Raeman <[email protected]> > wrote: > > > Generally speaking you cannot do better than about 25 Msps over a 1GbE link. > By default the samples are signed 16-bit I/Q pairs, which means 32 bits per > sample. At 25 Msps, that means the total data throughput is 800 Mbps – which > is starting to approach the bandwidth over the 1 Gbps link. > > If you have 60 Msps sampling rate, that is 1920 Mbps throughput, which is > more than a 1 Gbps link. If you can tolerate the bad quantization it’s > possible you could get closer to that rate by using signed 8-bit I/Q values, > but I’ve not tried it. I think you would specify this as “--rx_otw sc8” > > Best, > David > _______________________________________________ > USRP-users mailing list -- [email protected] > To unsubscribe send an email to [email protected]
_______________________________________________ USRP-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
