Correct mail I suggest to use 10GbE network cable link to computer.
谢谢，有任何问题请随时与我联系！ —————————————————————— 李泽远|研发工程师 北京曾益科技有限公司 手机：13121162044 地址：北京市海淀区中关村大街中关村SOHO 1108 网址：www.zengyi-tech.com <http://www.zengyi-tech.com> 发件人: [email protected] <[email protected]> 发送时间: 2022年2月17日 12:09 收件人: 'Giuseppe Santaromita' <[email protected]>; [email protected] 主题: [USRP-users] 答复: 答复: OAI with USRP N310 Problem is OVERFLOW that means some samples missing. Could you show me N310 connection mode? I suggest to use 10GB network cable to connect to computer. 谢谢，有任何问题请随时与我联系！ —————————————————————— 李泽远|研发工程师 北京曾益科技有限公司 手机：13121162044 地址：北京市海淀区中关村大街中关村SOHO 1108 网址：www.zengyi-tech.com <http://www.zengyi-tech.com> 发件人: Giuseppe Santaromita <[email protected] <mailto:[email protected]> > 发送时间: 2022年2月15日 20:08 收件人: [email protected] <mailto:[email protected]> ; [email protected] <mailto:[email protected]> 主题: Re: 答复: [USRP-users] OAI with USRP N310 Thank you very much. This (attached) is the log files. Any ideas? Il 15/2/22 3:16, [email protected] <mailto:[email protected]> ha scritto: Please try this “sudo ./nr-softmodem -O ../../../ci-scripts/conf_files/gnb.band78.tm1.106PRB.usrpn300.conf --sa --args clock_source=internal || sudo tee files_log.txt” 谢谢，有任何问题请随时与我联系！ —————————————————————— 李泽远|研发工程师 北京曾益科技有限公司 手机：13121162044 地址：北京市海淀区中关村大街中关村SOHO 1108 网址：www.zengyi-tech.com <http://www.zengyi-tech.com> 发件人: Giuseppe Santaromita <mailto:[email protected]> <[email protected]> 发送时间: 2022年2月15日 2:02 收件人: [email protected] <mailto:[email protected]> 主题: [USRP-users] OAI with USRP N310 Dear community, I would like to use OpenAirInterface with the USRP N310 and I am having overflow problems. I am forwarding here the email I sent to the OAI mail list, because I think the problem is with the USRP and non-real time operations. Does anyone have any ideas? Thanks in advance, Giuseppe Dear community, After solving problems with OAI installation and USRP N310 configuration, I am trying to create a 5G SA link, starting with gNB. I tried this: sudo ./nr-softmodem -O ../../../ci-scripts/conf_files/gnb.band78.tm1.106PRB.usrpn300.conf --sa --args clock_source=internal But it gives problems that I think are related to the fact that probably the operations are not in real time. For example: [PHY] rx_rf: Asked for 30720 samples, got 18906 from USRP [PHY] problem receiving samples LLLLLLLLLLLLLLLLLLLLLLLLLLLO[HW] [recv] received 18906 samples out of 30720 [HW] Time: 1.41826 s ERROR_CODE_OVERFLOW (Overflow) Or, even earlier: [WARNING] [MPM.RPCServer] A timeout event occured! Also, I would like to attach a log file but I can't find it, and using the "> file_log.txt" at the end of the command it all goes immediately in overflow. Does anyone have any ideas?
_______________________________________________ USRP-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
