The polished bolt you are refering to really isn't a bolt. It's a plastic cap
that is hand pressed into the hex bolt. Just take a very smal flat heat screw
driver and pop it out. be sure to take you time doing this or you will damage
the plastic cap. hope this helps..
Patrick 89 VMAX
>Greetings. Just picked up a Mini III windshield for my Vmax but the parts
>box didn't contain a "how to" sheet. Since the shop wants $50/hour to
>install, and since it looks like an easy enough install (< 1 hour) , I
>opted to do it myself. But for the life of me, I can't figure out how
>windshield mounts attach to the bike. It looks like the windshield mounts
>attach to the top set of clamps securing the bike's forks. But the bolt
>which clamps the forks at this location isn't a philips head, nor is it a
>flat head, nor an Allen wrench head -- in fact, it isn't anything, it's a
>flat polished head. Is this the right location to attache the mounts and,
>if so, how do I get that bolt out? Any info would be MUCH appreciated.
> Any detailed explanations can be sent to me directly. Thanks much.
>
>Neal L Davis
>[EMAIL PROTECTED]
>
>.............................................
>To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
>.............................................
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
