Jeff,
Going back thru my notes and i realized i hadn't thanked you for this advice.
This worked well for the clips. They are about 1.75 each so you saved me some
about 14 bucks... I was worried about the clips not being reusable and cutting
the plastic tips off of the scoops. I am waiting on the rubber dampers from
HLSM.
I sent to list to let everyone know this worked for me.
Phil
Joediesl wrote:
> I popped the clips off with a large screwdriver. (I put safety glasses on
> after the first one came off). After getting the scoops back from the
> chromers, I put the clips in a vise and squished them back to "square" -
> seemed to work fine.
>
> I used standard black rtv silicone on the rear rubbers. I let them "cure"
> over night with light tension on them and they are on there solid as before.
>
> Jeff Rice
> 1998 V-Max
> [EMAIL PROTECTED]
>
> ----- Original Message -----
> From: Phil <[EMAIL PROTECTED]>
> To: V-MAX TECH LIST <[EMAIL PROTECTED]>
> Sent: Thursday, March 23, 2000 12:23 PM
> Subject: Chromed Scoops and RubberDoodads
>
> > couple of questions regarding the Rubber dampers that are supposed to be
> > attatched to the scoops.
> >
> > 1. There are two rubber dampers that are attatched via clips. Can these
> > clips be reused ? If so How ? I couldn't even get my old ones off so
> > they are still on the scoops. They were actually chromed.
> >
> > 2. There is another rubber damper that is attatched via some sort of
> > adhesive. What can i use to reattatch the old one ?
> >
> > Thanks in Advance
> > Phil
> >
> >
> >
> > .............................................
> > To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
> > .............................................
>
> .............................................
> To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
> .............................................
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
