For sure !! This is a good time to replace the (16), 5x12mm screws
that hold the float bowls on and the (16), 6x10mm guys that hold the
front and side rails on with hex screws. Hmmmmmm ... and the (8),
5x8mm guys on the top brackets and the (24)4x10s for the enrichment
valve covers and choke pistons, (look great with little half heights
in there). Of course all those brackets and the fuel bowls polish up
like chrome .... (but no one will ever see them .. sigh). Uh ... (4),
4x18mm and (4), 4x10 in the fuel bowl ... hmmmmmmm ... never mind ...
Well at least you will be able to get them out next time.
campbell
----- Original Message -----
From: Joe Diesl <[EMAIL PROTECTED]>
Subject: Re: setting floats
> They definitely have to come off. I procrastinated for a long time
before
> pulling the stack. The fuel bowl covers are REALLY on there. Its
amazing
> how tight those screws are from the factory. I couldn't see any
evidence of
> lock-tite, but after twisting the Phillips head on one I reverted to
a 3/8"
> impact, which worked great.
>
> ----- Original Message -----
> From: Clancy Bauler <[EMAIL PROTECTED]>
> Subject: setting floats
> > Can anyone tell me if theres a way to set the floats ON the bike
> snip <
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
