Hi Steve,
I tried that tire on my Max also, a couple of years ago. Same problem.
Fortunately the dealer replaced the tire with a Dunlop (can't remember which
model, but V rated). It lasted 1000 miles...sigh. Last couple of changes
I've used the Avon Super Venom front and rear. They're wonderful.
Apparently variations in the Metz. enable it to work sometimes, on some
Maxes, and not on others. I don't think the gain from being able to use that
tire are worth messing with your axle geometry. It's a high mileage cruiser
tire, but doesn't handle as well as the narrower Dunlops and Avons. Try the
Avon, you'll love it.
Just my opinion.
Best,
Sat Tara
on 4/17/00 7:56 PM, steven detamore at [EMAIL PROTECTED] wrote:
> just a note about my experience with the Metz. 880 170-80-hb15 on MY
> stock swingarm '85. when first mounted saw about 1/16" clearance on the
> shaft side. checked the pressure,low, raised to spec. and the clearance
> disappeared. to date it has run the outter rim off the tread and on a short
> (low speed) ride with my wife put a couple of serious scuffs on the sidewall
> as well. could i shave about 1/32-1/16th off the washer beside the brake
> bracket and add the same on the otherside? or am i just going to buy a new
> tire? thanks for any reply.....steve #1131
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
