[EMAIL PROTECTED] wrote:
> hello all
> has anyone ever tried to remove the drive spline hub out of a stock
> wheel? i think what I'm would like to do is to remove the hub and instead of
> shimming the spline apart (for a bigger tire on the stock wheel) with the
> spacer, is to make a shim for behind the hub. then when it's back together
> and wheel mounted the spline would be in the stock position, and it wouldn't
> lose and of it's matting surface.
> anyone have any thoughts on this?
> mike863
>
If you do this two things will happen. The retainer clip will no longer fit and
the O-ring that seals the hub to the wheel won't seal.
===================================================
Paul Sayegh
V-Max Technical List Administrator
VMOA Northwest Director
V-Max web page http://www.sayegh.org/tips.htm
===================================================
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
