Tyler
I don't know if you get this during the day but I am sending you this
message from work. I am wondering why the shift instructions say to cut
two loops for a 4 cylinder but you have told me to cut all three... I
have no doubt that your correct but I am still wondering why....
Thanks Phil
P.S. Coldest day of the year in colorado today. I OF COURSE took a 1/2
day and am OF COURSE the most prepared to race that I have been all year
and OF COURSE it is rainy and I probably won't be able to race...SIGH :)
Tyler Pennock wrote:
>
> Tap to any one coil that's easy to get at. yes switched means with the key on, bring
>the RED and GREEN wire to the coil of your choice.
>
> 1 - unplug the 2 wire connector of that coil.
> 2 - use a meter or a light, ground one lead(BLACK LEAD) of light/meter to frame,
> 3 - at the connector you unplug at the coil, use the one that goes to the harness
> 4 - there are 2 wires in that connector, using the meter/light find the one that has
>power when the key is on only(this is where the RED from MSD hooks up
> 5 - the other wire should have no power where key is on or not,this is the wire you
>hook the MSD GREEN to.
> Tyler Pennock, # 380
> V max Owners Association
> Eastern-Canada Director
> 1987 V max 1260
> Ottawa,ON,Canada
> <[EMAIL PROTECTED]>
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
