Second part . When I had the pads out of my '99 bike the stock pads
were marked
as having a HH friction material . Are the EBC's HH pads superior ?
Eric H.
----- Original Message -----
From: "Eric Harnish" <[EMAIL PROTECTED]>
To: "V-MAX TECH LIST" <[EMAIL PROTECTED]>
Sent: Sunday, November 26, 2000 9:25 AM
Subject: Brakes 6 piston to 4 piston
> When comparing two calipers & the rotors are the same & the pumping
> force of the master cylinder is the same is there a gain if using a
> greater number of pistons in the caliper ?
> I'm looking at a set of six piston calipers . I measured the piston
> area & the pad area & compared them to my stock four piston calipers .
> The six piston unit is 4% smaller in the pads & 2% smaller in over all
> piston area . The only gain that I can see is the six piston caliper's
> pads move about 7% of its pad area further out on the rotor increasing
> the lever action . Looks like a wash out to me . Any comments ?
> Eric H .
>
>
> .............................................
> To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
> .............................................
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
