Steve, That does not answer my question . I have no doubt that the EBC's
are a good replacement pad but however HH is a friction rating not a
brand name . What I want to know is has someone actually tested the
performance of the EBC HH pads compared to the stock Sumitomo Toyo HH
pads . I'm curious to know if the years before '99 came with HH pads in
them . I'm looking very hard at what can be done to truly upgrade the
late model brake system . So far I can't find anything besides a
complete system replacement like the Brembo set up . I've measured the
R1 and the six piston Tokico and can't see a gain if any in either one
except in looks .From what I understand you need to replace the master
cyl. to get good performance . Then you have mismatched controls on the
bar . The best mods for the money that I see are the steel lines, EBC or
Galfer pads, & springs in the forks . Beyond this it is a grand to gain
what ?
By the way a while back there was a discussion on brakes & the topic
came up about Residual Pressure valves . Well during my research on
brakes I came accross an article addressing this issue . It said that a
Residual Pressure valve is only needed when the master cylinder is
mounted level or lower than the calipers or wheel cylinders . Just
thought you all would like to know :)
Eric H.
----- Original Message -----
From: "Steve Morris, SMS" <[EMAIL PROTECTED]>
To: "V-MAX TECH LIST" <[EMAIL PROTECTED]>
Sent: Sunday, November 26, 2000 9:52 AM
Subject: Re: Brakes 6 piston to 4 piston
> Eric, the HHs are up there with the best.. long life, no disk damage,
great
> stopping power, good price...
>
> Steve
> http://unclefesters.com
>
>
> ----- Original Message -----
> From: Eric Harnish <[EMAIL PROTECTED]>
>
>
> > Second part . When I had the pads out of my '99 bike the stock
pads
> > were marked
> > as having a HH friction material . Are the EBC's HH pads superior ?
> > Eric H.
> > ----- Original Message -----
> > From: "Eric Harnish" <[EMAIL PROTECTED]>
> > To: "V-MAX TECH LIST" <[EMAIL PROTECTED]>
> > Sent: Sunday, November 26, 2000 9:25 AM
> > Subject: Brakes 6 piston to 4 piston
> >
>
>
> .............................................
> To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
> .............................................
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
