Pat,
 Your little dehumidifier outfit should pose no danger to your A/S; it's
a good idea and not expensive to operate.

Another use for our "temperature gun" that was discussed a few days ago
was to check the cord of our electric heater, the wall receptacle, and
all receptacles between that one and the circuit breaker panel. Running
the heater on "high" caused all of those points to get slightly warm.

                                         <<Jim>>

Patrick Ewing wrote:
> 
> Scott,
> 
> There are safe ones and not so safe electric heaters. I've safely used
> electric heat for many years with no troubles at all. Why even the gas
> heaters could cause troubles if not properly used & maintained.
> 
> For the Bambi I have made up a little metal tube with a "hat" that's
> mounted on a base that has a 60 watt bulb. The air circulates in
> through openings in the bottom and obviously comes out the top. With
> just this on during the winter it stays nice & dry and it's always 10
> degrees warmer in the trailer than it is outside whatever the outside
> temp is. I place this on top of the cook stove top. I feel this is
> probably the safest way to keep an interior dry short of using
> chemical dryers.
> 
> It would indeed be a sad day to have a vintage Airstream melt down,
> ............... and even worse if there was a tragic loss of live.
> This we don't need.
> 
> Pat
> 
> Scott & Lise Scheuermann wrote:
> 
> > Pat, I would never recommend leaving an electric heater running
> > unattended, especially in a trailer. I know someone who's Airstream
> > suffered from extreme meltdown when the heater malfunctioned. The
> > fire department had to be called in. It was a sad day.

-- 

                       <<http://www.oldengine.org/members/jdunmyer>>
                                <<[EMAIL PROTECTED]>>
                               <<lower SE Michigan, USA>>
                            <<mailto:[EMAIL PROTECTED]>>



To unsubscribe or to change to a daily Digest, please go to
http://www.airstream.net/vaclist/listoffice.html

If replying back to this message, please delete all the unnecessary original
text from your reply.

 

Reply via email to