Bobby,
There's probably only a couple of brake manufacturers, Dexter and Hayes
come to mind. There's quite a few more controller manufacturers. Most
electric brakes draw a maximum of 3 amps per wheel, no matter who made
them, and the controllers are rated accordingly. You'll see some that
are rated at 12 amps (2 axles) and some that are rated higher for
tri-axle trailers.
Go to Tom Patterson's archives at http://www.tompatterson.com for
several discussions on brakes and controllers over the years.
Bobby wrote:
I have been reading all the post on brake controllers, and seem to be
somewhat confussed by all the different
brands available. My impression was that the controller should be the
same type/manufacture as my brakes. Is
this correct?
>From what I have been reading from the list, it doesn't seem to matter
who makes it. Which is correct?
--
<<http://www.oldengine.org/members/jdunmyer>>
<<[EMAIL PROTECTED]>>
<<lower SE Michigan, USA>>
<<mailto:[EMAIL PROTECTED]>>
To unsubscribe or to change to a daily Digest, please go to
http://www.airstream.net/vaclist/listoffice.html
If replying back to this message, please delete all the unnecessary original
text from your reply.
