Hello Andy
I must of missed that the OS id was incorrect. Thank you
Any info about the time zone changes in VCL images? Or the other error?
Thanks so much
-Alex
On Fri, Aug 27, 2010 at 9:39 AM, Andy Kurth <andy_ku...@ncsu.edu> wrote:
> Hello,
> What is the OS of the image? The log output seems to indicate that the
> image is either XP or 2003 but the VCL OS module being used is for one of
> the Windows 6.x versions: Visa, 7, or 2008.
>
> Windows 5.x uses 'netsh firewall' and Windows 6.x uses 'netsh advfirewall'.
> If 'netsh advfirewall' is attempted on Windows 5.x, netsh.exe will return
> "The following command was not found: ...".
>
> Check if your image has the correct OSid value in the VCL database
> (image.OSid). This points to the OS table, which points to the module
> table:
> image.OSid --> OS.id
> OS.moduleid --> module.id
>
> Hope this helps,
> Andy
>
> Alexander Patterson wrote:
>>
>> Hello,
>>
>>
>> I'm getting this error with my Office 2010 Image that was working
>> before and now it's failing at resources ready.
>>
>> Anyways here is the error log.
>>
>> e operation completed successfully The following command was not
>> found: advfirewall firewall delete rule name=all dir=in protocol=TCP
>> localport=3389. The following command was not found: advfirewall
>> firewall add rule "name=VCL: allow RDP port 3389 to: 10.10.10.148"
>> "description=Allows incoming RDP (TCP port 3389) traffic to:
>> 10.10.10.148" protocol=TCP localport=3389 action=allow enable=yes
>> dir=in localip=10.10.10.148.
>>
>>
>>
>>
>> Here is the log
>>
>> 31374|7892:7628|new| /usr/bin/ssh -i /etc/vcl/vcl.key -l root -p 22
>> -x vmguest-68 'reg.exe ADD
>> "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server"
>> /t REG_DWORD /v fDenyTSConnections /d 0 /f ; reg.exe ADD
>> "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal
>> Server\WinStations\RDP-Tcp" /t REG_DWORD /v UserAuthentication /d 0 /f
>> ; netsh.exe advfirewall firewall delete rule name=all dir=in
>> protocol=TCP localport=3389 ; netsh.exe advfirewall firewall add rule
>> name="VCL: allow RDP port 3389 to: 10.10.10.148" description="Allows
>> incoming RDP (TCP port 3389) traffic to: 10.10.10.148" protocol=TCP
>> localport=3389 action=allow enable=yes dir=in localip=10.10.10.148'
>> 2>&1
>> 2010-08-26
>> 15:46:46|30857|7890:7626|reserved|DataStructure.pm:get_reservation_remote_ip(956)|reservation
>> remote IP is not defined
>> 2010-08-26 15:46:48|5137|vcld:main(165)|lastcheckin time updated for
>> management node 1: 2010-08-26 15:46:48
>> 2010-08-26
>> 15:46:51|30857|7890:7626|reserved|DataStructure.pm:get_reservation_remote_ip(956)|reservation
>> remote IP is not defined
>> 2010-08-26
>> 15:46:53|31374|7892:7628|new|utils.pm:run_ssh_command(6262)|run_ssh_command
>> output:
>> |31374|7892:7628|new| The operation completed successfully
>> |31374|7892:7628|new| The operation completed successfully
>> |31374|7892:7628|new| The following command was not found: advfirewall
>> firewall delete rule name=all dir=in protocol=TCP localport=3389.
>> |31374|7892:7628|new| The following command was not found: advfirewall
>> firewall add rule "name=VCL: allow RDP port 3389 to: 10.10.10.148"
>> "description=Allows incoming RDP (TCP port 3389) traffic to:
>> 10.10.10.148" protocol=TCP localport=3389 action=allow enable=yes
>> dir=in localip=10.10.10.148.
>> 2010-08-26 15:46:53|31374|7892:7628|new|utils.pm:run_ssh_command(6272)|SSH
>> command executed on vmguest-68, command:
>> |31374|7892:7628|new| /usr/bin/ssh -i /etc/vcl/vcl.key -l root -p 22
>> -x vmguest-68 'reg.exe ADD
>> "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server"
>> /t REG_DWORD /v fDenyTSConnections /d 0 /f ; reg.exe ADD
>> "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal
>> Server\WinStations\RDP-Tcp" /t REG_DWORD /v UserAuthentication /d 0 /f
>> ; netsh.exe advfirewall firewall delete rule name=all dir=in
>> protocol=TCP localport=3389 ; netsh.exe advfirewall firewall add rule
>> name="VCL: allow RDP port 3389 to: 10.10.10.148" description="Allows
>> incoming RDP (TCP port 3389) traffic to: 10.10.10.148" protocol=TCP
>> localport=3389 action=allow enable=yes dir=in localip=10.10.10.148'
>> 2>&1
>> |31374|7892:7628|new| returning (1, "The operation completed succes...")
>>
>> |31374|7892:7628|new| ---- WARNING ----
>> |31374|7892:7628|new| 2010-08-26
>>
>> 15:46:53|31374|7892:7628|new|Version_6.pm:firewall_enable_rdp_private(968)|failed
>> to add firewall rule to enable RDP to: 10.10.10.148, exit status: 1,
>> output:
>> |31374|7892:7628|new| The operation completed successfully The
>> operation completed successfully The following command was not found:
>> advfirewall firewall delete rule name=all dir=in protocol=TCP
>> localport=3389. The following command was not found: advfirewall
>> firewall add rule "name=VCL: allow RDP port 3389 to: 10.10.10.148"
>> "description=Allows incoming RDP (TCP port 3389) traffic to:
>> 10.10.10.148" protocol=TCP localport=3389 action=allow enable=yes
>> dir=in localip=10.10.10.148.
>> |31374|7892:7628|new| ( 0) utils.pm, notify (line: 737)
>> |31374|7892:7628|new| (-1) Version_6.pm, firewall_enable_rdp_private
>> (line: 968)
>> |31374|7892:7628|new| (-2) Windows.pm, post_load (line: 474)
>> |31374|7892:7628|new| (-3) Version_6.pm, post_load (line: 206)
>> |31374|7892:7628|new| (-4) new.pm, reload_image (line: 692)
>> |31374|7892:7628|new| (-5) new.pm, process (line: 266)
>> |31374|7892:7628|new| (-6) vcld, make_new_child (line: 594)
>>
>>
>> |31374|7892:7628|new| ---- WARNING ----
>> |31374|7892:7628|new| 2010-08-26
>> 15:46:53|31374|7892:7628|new|Windows.pm:post_load(475)|unable to
>> enable RDP on private network
>> |31374|7892:7628|new| ( 0) utils.pm, notify (line: 737)
>> |31374|7892:7628|new| (-1) Windows.pm, post_load (line: 475)
>> |31374|7892:7628|new| (-2) Version_6.pm, post_load (line: 206)
>> |31374|7892:7628|new| (-3) new.pm, reload_image (line: 692)
>> |31374|7892:7628|new| (-4) new.pm, process (line: 266)
>> |31374|7892:7628|new| (-5) vcld, make_new_child (line: 594)
>> |31374|7892:7628|new| (-6) vcld, main (line: 341)
>>
>>
>> |31374|7892:7628|new| ---- WARNING ----
>> |31374|7892:7628|new| 2010-08-26
>> 15:46:53|31374|7892:7628|new|Version_6.pm:post_load(210)|failed to
>> execute parent class post_load() subroutine
>> |31374|7892:7628|new| ( 0) utils.pm, notify (line: 737)
>> |31374|7892:7628|new| (-1) Version_6.pm, post_load (line: 210)
>> |31374|7892:7628|new| (-2) new.pm, reload_image (line: 692)
>> |31374|7892:7628|new| (-3) new.pm, process (line: 266)
>> |31374|7892:7628|new| (-4) vcld, make_new_child (line: 594)
>> |31374|7892:7628|new| (-5) vcld, main (line: 341)
>>
>> No recipient addresses found in header
>> 2010-08-26 15:46:53|31374|7892:7628|new|utils.pm:mail(1348)|SUCCESS --
>> Sending mail To: , PROBLEM -- new.pm
>>
>> |31374|7892:7628|new| ---- CRITICAL ----
>> |31374|7892:7628|new| 2010-08-26
>> 15:46:53|31374|7892:7628|new|new.pm:reload_image(697)|failed to
>> perform OS post-load tasks for vmwarewinxp-MicrosoftOffice201075-v0 on
>> vmguest-68, returning
>> |31374|7892:7628|new| ( 0) utils.pm, notify (line: 737)
>> |31374|7892:7628|new| (-1) new.pm, reload_image (line: 697)
>> |31374|7892:7628|new| (-2) new.pm, process (line: 266)
>> |31374|7892:7628|new| (-3) vcld, make_new_child (line: 594)
>> |31374|7892:7628|new| (-4) vcld, main (line: 341)
>>
>> 2010-08-26
>> 15:46:53|31374|7892:7628|new|utils.pm:insertloadlog(4710)|inserted
>> computer=72, loadimagefailed, failed to perform OS post-load tasks for
>> vmwarewinxp-MicrosoftOffice201075-v0 on vmguest-68
>>
>> |31374|7892:7628|new| ---- WARNING ----
>> |31374|7892:7628|new| 2010-08-26
>> 15:46:53|31374|7892:7628|new|new.pm:process(313)|failed to load
>> vmguest-68 with vmwarewinxp-MicrosoftOffice201075-v0
>> |31374|7892:7628|new| ( 0) utils.pm, notify (line: 737)
>> |31374|7892:7628|new| (-1) new.pm, process (line: 313)
>> |31374|7892:7628|new| (-2) vcld, make_new_child (line: 594)
>> |31374|7892:7628|new| (-3) vcld, main (line: 341)
>>
>> 2010-08-26
>> 15:46:53|31374|7892:7628|new|DataStructure.pm:get_computer_state_name(1946)|attempting
>> to retrieve current state of computer vmguest-68 from the database
>> 2010-08-26
>> 15:46:53|31374|7892:7628|new|DataStructure.pm:get_computer_state_name(1977)|retrieved
>> current state of computer vmguest-68 from the database: reloading
>> 2010-08-26
>> 15:46:53|31374|7892:7628|new|DataStructure.pm:_automethod(697)|data
>> structure updated:
>> $self->request_data->{reservation}{7628}{computer}{state}{name}
>> |31374|7892:7628|new| computer_state_name = reloading
>> No recipient addresses found in header
>> 2010-08-26 15:46:53|31374|7892:7628|new|utils.pm:mail(1348)|SUCCESS --
>> Sending mail To: , PROBLEM -- State.pm
>>
>> |31374|7892:7628|new| ---- CRITICAL ----
>> |31374|7892:7628|new| 2010-08-26
>> 15:46:53|31374|7892:7628|new|State.pm:reservation_failed(290)|reservation
>> failed on vmguest-68: process failed after trying to load or make
>> available
>> |31374|7892:7628|new| ( 0) utils.pm, notify (line: 737)
>> |31374|7892:7628|new| (-1) State.pm, reservation_failed (line: 290)
>> |31374|7892:7628|new| (-2) new.pm, process (line: 316)
>> |31374|7892:7628|new| (-3) vcld, make_new_child (line: 594)
>> |31374|7892:7628|new| (-4) vcld, main (line: 341)
>>
>>
>>
>>
>>
>>
>> I also had a question about (We get this warning each time when an
>> image is loading. I doesn't really effect anything, but is there a way
>> to change this around so ti doesn't come up)
>>
>> Use of uninitialized value in pattern match (m//) at
>> /usr/local/vcl/bin/../lib/VCL/utils.pm line 2745 (#1)
>>
>> |31374|7892:7628|new| ---- WARNING ----
>> |31374|7892:7628|new| 2010-08-26
>> 15:46:07|31374|7892:7628|new|vcld:warning_handler(636)|Use of
>> uninitialized value in pattern match (m//) at
>> /usr/local/vcl/bin/../lib/VCL/utils.pm line 2745.
>> |31374|7892:7628|new| ( 0) utils.pm, notify (line: 737)
>> |31374|7892:7628|new| (-1) vcld, warning_handler (line: 636)
>> |31374|7892:7628|new| (-2) utils.pm, _sshd_status (line: 2745)
>> |31374|7892:7628|new| (-3) vmware.pm, load (line: 859)
>> |31374|7892:7628|new| (-4) new.pm, reload_image (line: 665)
>> |31374|7892:7628|new| (-5) new.pm, process (line: 266)
>> |31374|7892:7628|new| (-6) vcld, make_new_child (line: 594)
>>
>>
>> |31374|7892:7628|new| ---- WARNING ----
>> |31374|7892:7628|new| 2010-08-26
>> 15:46:07|31374|7892:7628|new|vcld:warning_handler(636)|Use of
>> uninitialized value in pattern match (m//) at
>> /usr/local/vcl/bin/../lib/VCL/utils.pm line 2745.
>> |31374|7892:7628|new| ( 0) utils.pm, notify (line: 737)
>> |31374|7892:7628|new| (-1) vcld, warning_handler (line: 636)
>> |31374|7892:7628|new| (-2) utils.pm, _sshd_status (line: 2745)
>> |31374|7892:7628|new| (-3) vmware.pm, load (line: 859)
>> |31374|7892:7628|new| (-4) new.pm, reload_image (line: 665)
>> |31374|7892:7628|new| (-5) new.pm, process (line: 266)
>> |31374|7892:7628|new| (-6) vcld, make_new_child (line: 594)
>>
>>
>>
>> And my very last question is
>>
>> I also wanted to know if I could change the TIME Zone to PST, where is
>> that command stored at?
>>
>> I still have images coming up as CSUN time. I went into the sysprep
>> ini file and changed the time zone there and that didn't fix the
>> problem, the time on the page itself is fine, but when the images load
>> up they are the incorrect time.
>>
>> Thanks,
>> Alex Patterson
>> User Support Services
>> Operating System Analyst
>> California State University, East Bay
>
> --
> Andy Kurth
> Virtual Computing Lab
> Office of Information Technology
> North Carolina State University
> andy_ku...@ncsu.edu
> 919.513.4090
>
--
Thanks,
Alex Patterson
User Support Services
Operating System Analyst
California State University, East Bay
