Hello again,
Dimitri, thanks for the advice.
I have a question about these commands.
Below, you wrote "nodeset d6100a image",
But there is no image argument for nodeset.
Here is the man page:
nodeset [-h|--help|-v|--version]
nodeset <noderange>
[install|shell|boot|runcmd=bmcsetup|netboot|iscsiboot|osimage=<imagename>|s
tatelite]
When I try the command as-is, I get this:
nodeset d6100a image
d6100a: Error: Unable to identify plugin for this command, check relevant
tables: nodetype.os
Error: Some nodes failed to set up image resources, aborting
I have done tabdump on the various tables, and done tabedit to modify them
to my environment.
I know this is not an xCAT list, but your guidance would be appreciated.
Thanks,
Al Quiros
On 3/13/12 4:45 PM, "Dmitri Chebotarov" <dcheb...@gmu.edu> wrote:
>Evelio,
>
>You should be able to capture image via xCAT before you can use VCL/xCAT.
>
>To capture image via xCAT:
>
>nodech d6100a nodetype.os=image nodetype.profile=rh5image-rh66-v0
>nodeset d6100a image - this will create PXEboot config file for d6100a:
>
>cat /tftpboot/pxelinux.cfg/<d6100a-PXE-if-mac>
>
> #image rh5image-rh66-v0
> DEFAULT xCAT
> LABEL xCAT
> KERNEL xcat/image/x86_64/vmlinuz
> APPEND initrd=xcat/image/x86_64/initrd.img
>imgurl=http://xcat-master/install/image/x86_64/installer_files/rootimg.gz
>image=/install/image/x86_64/rh5image-rh66-v0.img
>blocks=512
>action=save installnic=eth0 reboot noipv6
> IPAPPEND 2
>
>'tabdump nodetype' should look similar to this - note that arch is x86:
>
>#node,os,arch,profile,provmethod,supportedarchs,nodetype,comments,disable
>...
>"d6100a","image","x86","rh5image-rh66-v0","image","x86,x86_64",,,
>...
>
>Then do 'rpower d6100a reset'. This will restart d6100a and when node
>boots over PXE it will boot into
>http://xcat-master/install/image/x86_64/installer_files/rootimg.gz and,
>given that image works fine and maps NFS store OK, it dump hd image to
>/install/image/x86_64/rh5image-rh66-v0.img .
>
>If it's successful then to install from the image:
>
>nodeset d6100a install
>
>'tabdump nodetype' should look similar to this - provmethod changes from
>image to install:
>
>#node,os,arch,profile,provmethod,supportedarchs,nodetype,comments,disable
>...
>"d6100a","image","x86","rh5image-rh66-v0","install","x86,x86_64",,,
>...
>
>If these steps work OK, then you can use VCL to capture bare-metal image.
>VCL uses 'nodeset <node> image' and 'nodeset <node> install' commands, so
>it's good idea to make them work before using VCL.
>
>Thanks.
>On Mar 13, 2012, at 16:11 , Evelio Quiros wrote:
>
>> Hello Again,
>>
>> After trying again to capture a running image on a bare metal node, I
>>get
>> a failure message:
>> Any ideas ?
>>
>> Al Q
>>
>>
>> Added new image to database: 'rh6'
>> image.name: rh5image-rh66-v0
>> image.id: 6
>> imagerevision.id: 6
>> imagemeta.id: 3
>> resource.id: 16
>>
>>
>>-------------------------------------------------------------------------
>>--
>> -
>> Inserted imaging request to the database:
>> request ID: 1
>> reservation ID: 1
>>
>> This process will now display the contents of the vcld.log file if the
>>vcld
>> daemon is running. If you do not see many lines of additional output,
>>exit
>> this
>> process, start the vcld daemon, and monitor the image capture process by
>> running
>> the command:
>> tail -f /var/log/vcld.log | grep '1:1'
>>
>>
>>-------------------------------------------------------------------------
>>--
>> -
>> 2012-03-13 16:03:34|2012|vcld:main(167)|lastcheckin time updated for
>> management node 1: 2012-03-13 16:03:34
>> 2012-03-13 16:03:39|6899|utils.pm:setup_get_array_choice(9947)|choices
>> argument:
>> 2012-03-13 16:03:39|2012|vcld:main(167)|lastcheckin time updated for
>> management node 1: 2012-03-13 16:03:39
>> 2012-03-13 16:03:44|2012|vcld:main(167)|lastcheckin time updated for
>> management node 1: 2012-03-13 16:03:44
>> 2012-03-13 16:03:48|6899|utils.pm:insert_request(8358)|inserted new
>>reload
>> request into request table, request id=1
>> 2012-03-13 16:03:48|6899|utils.pm:insert_request(8389)|inserted new
>>reload
>> request into reservation table, reservation id=1
>> 2012-03-13 16:03:50|2012|vcld:main(167)|lastcheckin time updated for
>> management node 1: 2012-03-13 16:03:49
>> 2012-03-13
>>
>>16:03:50|2012|1:1|image|utils.pm:reservation_being_processed(8938)|comput
>>er
>> loadlog 'begin' entry does NOT exist for reservation 1
>> 2012-03-13 16:03:50|2012|1:1|image|utils.pm:run_command(9010)|executed
>> command: pgrep -fl 'vcld [0-9]+:1 ', pid: 7004, exit status: 0, output:
>> 2012-03-13
>>
>>16:03:50|2012|1:1|image|utils.pm:is_management_node_process_running(9192)
>>|p
>> rocess is NOT running, identifier: 'vcld [0-9]+:1 '
>> 2012-03-13
>>
>>16:03:50|2012|1:1|image|utils.pm:reservation_being_processed(8959)|reserv
>>at
>> ion is NOT currently being processed
>> 2012-03-13 16:03:50|2012|1:1|image|vcld:main(278)|reservation 1 is NOT
>> already being processed
>> 2012-03-13
>> 16:03:50|2012|1:1|image|utils.pm:get_request_info(4520)|standalone
>> affiliation found: Local
>> 2012-03-13 16:03:50|2012|1:1|image|vcld:main(283)|retrieved request
>> information from database
>> 2012-03-13
>>
>>16:03:50|2012|1:1|image|DataStructure.pm:is_parent_reservation(991)|retur
>>ni
>> ng true: parent reservation ID for this request: 1
>> 2012-03-13
>> 16:03:50|2012|1:1|image|utils.pm:update_request_state(1991)|request 1
>> state updated to: pending, laststate to: image
>> 2012-03-13 16:03:50|2012|1:1|image|utils.pm:insertloadlog(3875)|inserted
>> computer=1, begin, beginning to process, state is image
>> 2012-03-13 16:03:50|2012|1:1|image|vcld:make_new_child(515)|loaded
>> VCL::image module
>> 2012-03-13 16:03:50|2012|1:1|image|vcld:make_new_child(539)|current
>>number
>> of forked kids: 1
>> 2012-03-13 16:03:50|7018|1:1|image|vcld:make_new_child(555)|vcld
>> environment variable set to 0 for this process
>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'test' key for
>> VCL::image object from arguments
>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'forimaging'
>>key
>> for VCL::image object from arguments
>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'reservation'
>> key for VCL::image object from arguments
>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'userid' key
>>for
>> VCL::image object from arguments
>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set
>>'daterequested'
>> key for VCL::image object from arguments
>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set
>>'RESERVATIONID'
>> key for VCL::image object from arguments
>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'UPDATED' key
>> for VCL::image object from arguments
>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'SUBIMAGE' key
>> for VCL::image object from arguments
>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'CHECKTIME'
>>key
>> for VCL::image object from arguments
>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'state' key
>>for
>> VCL::image object from arguments
>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'laststate'
>>key
>> for VCL::image object from arguments
>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'PRELOADONLY'
>> key for VCL::image object from arguments
>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'laststateid'
>> key for VCL::image object from arguments
>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'user' key for
>> VCL::image object from arguments
>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'id' key for
>> VCL::image object from arguments
>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'PID' key for
>> VCL::image object from arguments
>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'DURATION' key
>> for VCL::image object from arguments
>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'PPID' key for
>> VCL::image object from arguments
>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'datemodified'
>> key for VCL::image object from arguments
>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set
>> 'RESERVATIONCOUNT' key for VCL::image object from arguments
>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'end' key for
>> VCL::image object from arguments
>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'stateid' key
>> for VCL::image object from arguments
>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'PARENTIMAGE'
>> key for VCL::image object from arguments
>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'checkuser'
>>key
>> for VCL::image object from arguments
>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'preload' key
>> for VCL::image object from arguments
>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set
>>'NOTICEINTERVAL'
>> key for VCL::image object from arguments
>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'start' key
>>for
>> VCL::image object from arguments
>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'logid' key
>>for
>> VCL::image object from arguments
>> 2012-03-13
>>
>>16:03:50|7018|1:1|image|Module.pm:create_mn_os_object(361)|VCL::Module::O
>>S:
>> :Linux::ManagementNode module loaded
>> 2012-03-13
>>
>>16:03:50|7018|1:1|image|Module.pm:new(196)|VCL::Module::OS::Linux::Manage
>>me
>> ntNode object created for image <not set>, address: 3fdf4b8
>> 2012-03-13
>>16:03:50|7018|1:1|image|DataStructure.pm:_automethod(834)|data
>> structure updated:
>> $self->request_data->{reservation}{0}{computer}{hostname}
>> |7018|1:1|image| computer_hostname = vcldev01.p.fiu.edu
>> 2012-03-13
>>16:03:50|7018|1:1|image|DataStructure.pm:_automethod(834)|data
>> structure updated:
>> $self->request_data->{reservation}{0}{computer}{NODENAME}
>> |7018|1:1|image| computer_node_name = vcldev01
>> 2012-03-13
>>16:03:50|7018|1:1|image|DataStructure.pm:_automethod(834)|data
>> structure updated:
>> $self->request_data->{reservation}{0}{computer}{SHORTNAME}
>> |7018|1:1|image| computer_short_name = vcldev01
>> 2012-03-13
>>16:03:50|7018|1:1|image|DataStructure.pm:_automethod(834)|data
>> structure updated:
>> $self->request_data->{reservation}{0}{computer}{IPaddress}
>> |7018|1:1|image| computer_ip_address = 10.106.128.12
>> 2012-03-13
>>
>>16:03:50|7018|1:1|image|Module.pm:create_mn_os_object(366)|VCL::Module::O
>>S:
>> :Linux::ManagementNode OS object created, address: 3fdf4b8
>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(192)|VCL::image object
>> created for state image, address: 3e02078
>> 2012-03-13 16:03:50|7018|1:1|image|State.pm:initialize(86)|obtained a
>> database handle for this state process, stored as $ENV{dbh}
>> 2012-03-13 16:03:50|7018|1:1|image|State.pm:check_image_os(762)|no
>> corrections need to be made to image OS: rh5image
>> 2012-03-13
>>
>>16:03:50|7018|1:1|image|DataStructure.pm:is_parent_reservation(991)|retur
>>ni
>> ng true: parent reservation ID for this request: 1
>> 2012-03-13
>> 16:03:50|7018|1:1|image|utils.pm:rename_vcld_process(7098)|reservation
>> count: 1
>> 2012-03-13
>> 16:03:50|7018|1:1|image|utils.pm:rename_vcld_process(7117)|PARENTIMAGE:
>>1
>> 2012-03-13
>> 16:03:50|7018|1:1|image|utils.pm:rename_vcld_process(7118)|SUBIMAGE: 0
>> 2012-03-13
>> 16:03:50|7018|1:1|image|utils.pm:rename_vcld_process(7136)|renamed
>>process
>> to 'vcld 1:1 image d6100a rh5image-rh66-v0 admin'
>> 2012-03-13
>>
>>16:03:50|7018|1:1|image|DataStructure.pm:is_parent_reservation(991)|retur
>>ni
>> ng true: parent reservation ID for this request: 1
>> 2012-03-13
>>
>>16:03:50|7018|1:1|image|DataStructure.pm:is_parent_reservation(991)|retur
>>ni
>> ng true: parent reservation ID for this request: 1
>> 2012-03-13
>>
>>16:03:50|7018|1:1|image|Module.pm:create_os_object(298)|VCL::Module::OS::
>>Li
>> nux module loaded
>> 2012-03-13
>> 16:03:50|7018|1:1|image|Module.pm:create_mn_os_object(335)|management
>>node
>> OS object has already been created, address: 3fdf4b8, returning 1
>> 2012-03-13
>> 16:03:50|7018|1:1|image|Module.pm:new(196)|VCL::Module::OS::Linux object
>> created for image rh5image-rh66-v0, address: 3fe23d8
>> 2012-03-13
>>
>>16:03:50|7018|1:1|image|Module.pm:create_os_object(304)|VCL::Module::OS::
>>Li
>> nux OS object created for rh5image-rh66-v0, address: 3fe23d8
>> 2012-03-13 16:03:50|7018|1:1|image|xCAT.pm:initialize(110)|XCATROOT
>> environment variable is not set, using /opt/xcat
>> 2012-03-13 16:03:50|7018|1:1|image|xCAT.pm:initialize(128)|xCAT root
>>path
>> found: /opt/xcat
>> 2012-03-13 16:03:50|7018|1:1|image|xCAT.pm:initialize(130)|xCAT module
>> initialized
>> 2012-03-13 16:03:50|7018|1:1|image|xCAT2.pm:initialize(110)|XCATROOT
>> environment variable is not set, using /opt/xcat
>> 2012-03-13 16:03:50|7018|1:1|image|xCAT2.pm:initialize(128)|xCAT root
>>path
>> found: /opt/xcat
>> 2012-03-13 16:03:50|7018|1:1|image|xCAT2.pm:initialize(130)|xCAT module
>> initialized
>> 2012-03-13
>>
>>16:03:50|7018|1:1|image|Module.pm:create_provisioning_object(420)|VCL::Mo
>>du
>> le::Provisioning::xCAT2 module loaded
>> 2012-03-13
>> 16:03:50|7018|1:1|image|Module.pm:create_mn_os_object(335)|management
>>node
>> OS object has already been created, address: 3fdf4b8, returning 1
>> 2012-03-13
>>
>>16:03:50|7018|1:1|image|Module.pm:new(200)|VCL::Module::Provisioning::xCA
>>T2
>> object created for computer d6100a, address: 3fe2570
>> 2012-03-13 16:03:50|7018|1:1|image|xCAT2.pm:initialize(110)|XCATROOT
>> environment variable is not set, using /opt/xcat
>> 2012-03-13 16:03:50|7018|1:1|image|xCAT2.pm:initialize(128)|xCAT root
>>path
>> found: /opt/xcat
>> 2012-03-13 16:03:50|7018|1:1|image|xCAT2.pm:initialize(130)|xCAT module
>> initialized
>> 2012-03-13
>>
>>16:03:50|7018|1:1|image|Module.pm:create_provisioning_object(426)|VCL::Mo
>>du
>> le::Provisioning::xCAT2 provisioner object created for d6100a, address:
>> 3fe2570
>> 2012-03-13 16:03:50|7018|1:1|image|State.pm:initialize(126)|returning 1
>> 2012-03-13 16:03:50|7018|1:1|image|vcld:make_new_child(565)|VCL::image
>> object created and initialized
>> 2012-03-13 16:03:50|7018|1:1|image|utils.pm:mail(1255)|SUCCESS --
>>Sending
>> mail To: evq...@fiu.edu, VCL IMAGE Creation Started: rh5image-rh66-v0
>> 2012-03-13 16:03:50|7018|1:1|image|xCAT.pm:does_image_exist(2434)|image
>>OS
>> install type: partimage
>> 2012-03-13
>>
>>16:03:50|7018|1:1|image|xCAT.pm:_get_image_repository_path(2910)|manageme
>>nt
>> node identifier argument was not specified
>> 2012-03-13
>>
>>16:03:50|7018|1:1|image|xCAT.pm:_get_image_repository_path(2932)|attempti
>>ng
>> to determine repository path for image on vcldev01.p.fiu.edu:
>> |7018|1:1|image| image id: 6
>> |7018|1:1|image| OS name: rh5image
>> |7018|1:1|image| OS type: linux
>> |7018|1:1|image| OS install type: partimage
>> |7018|1:1|image| OS source path: image
>> |7018|1:1|image| architecture: x86_64
>> 2012-03-13
>> 16:03:50|7018|1:1|image|xCAT.pm:_get_image_repository_path(2996)|did not
>> find any images under /images/linux_image/x86_64 on vcldev01.p.fiu.edu
>> 2012-03-13
>>
>>16:03:50|7018|1:1|image|xCAT.pm:_get_image_repository_path(3006)|returnin
>>g
>> repository path for vcldev01.p.fiu.edu: /images/image/x86_64
>> 2012-03-13 16:03:50|7018|1:1|image|xCAT.pm:does_image_exist(2444)|image
>> repository path: /images/image/x86_64
>> 2012-03-13 16:03:50|7018|1:1|image|utils.pm:run_command(9010)|executed
>> command: du -c /images/image/x86_64/*rh5image-rh66-v0* 2>&1 | grep total
>> 2>&1, pid: 7030, exit status: 1, output:
>> |7018|1:1|image| 0 total
>> 2012-03-13 16:03:50|7018|1:1|image|xCAT.pm:does_image_exist(2506)|image
>> does NOT exist: rh5image-rh66-v0
>> 2012-03-13
>>
>>16:03:50|7018|1:1|image|xCAT2.pm:_get_image_template_path(2084)|managemen
>>t
>> node identifier argument was not specified
>> 2012-03-13
>>
>>16:03:50|7018|1:1|image|xCAT2.pm:_get_image_template_path(2115)|attemptin
>>g
>> to determine template path for image:
>> |7018|1:1|image| image name: rh5image-rh66-v0
>> |7018|1:1|image| OS install type: partimage
>> |7018|1:1|image| OS source path: image
>> |7018|1:1|image| xCAT 2.x OS source path: image
>> 2012-03-13
>>
>>16:03:50|7018|1:1|image|xCAT2.pm:_get_image_template_path(2123)|returning
>>:
>> /opt/xcat/share/xcat/install/image
>> 2012-03-13
>>16:03:50|7018|1:1|image|xCAT.pm:does_image_exist(2518)|template
>> repository path for rh5image-rh66-v0: /opt/xcat/share/xcat/install/image
>> 2012-03-13
>>16:03:50|7018|1:1|image|xCAT.pm:does_image_exist(2530)|template
>> file does not exist:
>> /opt/xcat/share/xcat/install/image/rh5image-rh66-v0.tmpl
>> 2012-03-13 16:03:50|7018|1:1|image|xCAT.pm:does_image_exist(2570)|image
>> rh5image-rh66-v0 does NOT exist on this management node
>> 2012-03-13 16:03:50|7018|1:1|image|image.pm:process(145)|image
>> rh5image-rh66-v0 does not exist in the repository
>> 2012-03-13
>>16:03:50|7018|1:1|image|DataStructure.pm:_automethod(834)|data
>> structure updated:
>>$self->request_data->{reservation}{1}{image}{lastupdate}
>> |7018|1:1|image| image_lastupdate = 2012-03-13 16:03:50
>> 2012-03-13
>>16:03:50|7018|1:1|image|DataStructure.pm:_automethod(834)|data
>> structure updated:
>> $self->request_data->{reservation}{1}{imagerevision}{datecreated}
>> |7018|1:1|image| imagerevision_date_created = 2012-03-13 16:03:50
>> 2012-03-13 16:03:50|7018|1:1|image|image.pm:process(161)|calling
>> provisioning module's capture() subroutine
>> 2012-03-13
>> 16:03:50|7018|1:1|image|xCAT2.pm:capture(776)|image=rh5image-rh66-v0,
>> computer=d6100a
>> 2012-03-13
>> 16:03:50|7018|1:1|image|utils.pm:run_ssh_command(5380)|executing SSH
>> command on d6100a:
>> |7018|1:1|image| /usr/bin/ssh -i /etc/vcl/vcl.key -o
>> StrictHostKeyChecking=no -l root -p 22 -x d6100a 'chown root
>> currentimage.txt; chmod 777 currentimage.txt' 2>&1
>> 2012-03-13
>> 16:03:50|7018|1:1|image|utils.pm:run_ssh_command(5464)|run_ssh_command
>> output:
>> |7018|1:1|image| Warning: Permanently added 'd6100a,10.0.0.25' (RSA) to
>> the list of known hosts.
>> |7018|1:1|image| Permission denied, please try again.
>> |7018|1:1|image| Permission denied, please try again.
>> |7018|1:1|image| Permission denied
>> (publickey,gssapi-keyex,gssapi-with-mic,password).
>> 2012-03-13 16:03:50|7018|1:1|image|utils.pm:run_ssh_command(5474)|SSH
>> command executed on d6100a, command:
>> |7018|1:1|image| /usr/bin/ssh -i /etc/vcl/vcl.key -o
>> StrictHostKeyChecking=no -l root -p 22 -x d6100a 'chown root
>> currentimage.txt; chmod 777 currentimage.txt' 2>&1
>> |7018|1:1|image| returning (255, "Warning: Permanently added 'd6...")
>> 2012-03-13
>> 16:03:50|7018|1:1|image|utils.pm:write_currentimage_txt(5685)|updated
>> ownership and permissions on currentimage.txt
>> 2012-03-13
>> 16:03:50|7018|1:1|image|utils.pm:run_ssh_command(5380)|executing SSH
>> command on d6100a:
>> |7018|1:1|image| /usr/bin/ssh -i /etc/vcl/vcl.key -o
>> StrictHostKeyChecking=no -l root -p 22 -x d6100a 'echo -e
>>
>>"rh5image-rh66-v0\r\nid=6\r\nprettyname=rh6\r\nimagerevision_id=6\r\nimag
>>er
>> evision_datecreated=2012-03-13
>> 16:03:50\r\ncomputer_id=1\r\ncomputer_hostname=d6100a" >
>>currentimage.txt
>> && cat currentimage.txt' 2>&1
>> 2012-03-13
>> 16:03:50|7018|1:1|image|utils.pm:run_ssh_command(5464)|run_ssh_command
>> output:
>> |7018|1:1|image| Warning: Permanently added 'd6100a,10.0.0.25' (RSA) to
>> the list of known hosts.
>> |7018|1:1|image| Permission denied, please try again.
>> |7018|1:1|image| Permission denied, please try again.
>> |7018|1:1|image| Permission denied
>> (publickey,gssapi-keyex,gssapi-with-mic,password).
>> 2012-03-13 16:03:50|7018|1:1|image|utils.pm:run_ssh_command(5474)|SSH
>> command executed on d6100a, command:
>> |7018|1:1|image| /usr/bin/ssh -i /etc/vcl/vcl.key -o
>> StrictHostKeyChecking=no -l root -p 22 -x d6100a 'echo -e
>>
>>"rh5image-rh66-v0\r\nid=6\r\nprettyname=rh6\r\nimagerevision_id=6\r\nimag
>>er
>> evision_datecreated=2012-03-13
>> 16:03:50\r\ncomputer_id=1\r\ncomputer_hostname=d6100a" >
>>currentimage.txt
>> && cat currentimage.txt' 2>&1
>> |7018|1:1|image| returning (255, "Warning: Permanently added 'd6...")
>> |7018|1:1|image| ---- WARNING ----
>> |7018|1:1|image| 2012-03-13
>> 16:03:50|7018|1:1|image|utils.pm:write_currentimage_txt(5699)|failed to
>> create currentimage.txt file on d6100a:
>> |7018|1:1|image| Warning: Permanently added 'd6100a,10.0.0.25' (RSA) to
>> the list of known hosts.
>> |7018|1:1|image| Permission denied, please try again.
>> |7018|1:1|image| Permission denied, please try again.
>> |7018|1:1|image| Permission denied
>> (publickey,gssapi-keyex,gssapi-with-mic,password).
>> |7018|1:1|image| ( 0) utils.pm, write_currentimage_txt (line: 5699)
>> |7018|1:1|image| (-1) xCAT2.pm, capture (line: 779)
>> |7018|1:1|image| (-2) image.pm, process (line: 162)
>> |7018|1:1|image| (-3) vcld, make_new_child (line: 568)
>> |7018|1:1|image| (-4) vcld, main (line: 346)
>> |7018|1:1|image| ---- WARNING ----
>> |7018|1:1|image| 2012-03-13
>> 16:03:50|7018|1:1|image|xCAT2.pm:capture(783)|unable to update
>> currentimage.txt on d6100a
>> |7018|1:1|image| ( 0) xCAT2.pm, capture (line: 783)
>> |7018|1:1|image| (-1) image.pm, process (line: 162)
>> |7018|1:1|image| (-2) vcld, make_new_child (line: 568)
>> |7018|1:1|image| (-3) vcld, main (line: 346)
>> |7018|1:1|image| ---- WARNING ----
>> |7018|1:1|image| 2012-03-13
>> 16:03:50|7018|1:1|image|image.pm:process(166)|rh5image-rh66-v0 image
>> failed to be captured by provisioning module
>> |7018|1:1|image| ( 0) image.pm, process (line: 166)
>> |7018|1:1|image| (-1) vcld, make_new_child (line: 568)
>> |7018|1:1|image| (-2) vcld, main (line: 346)
>> 2012-03-13
>>
>>16:03:50|7018|1:1|image|DataStructure.pm:get_computer_private_ip_address(
>>15
>> 81)|attempting to retrieve private IP address for computer: d6100a
>> 2012-03-13
>>
>>16:03:50|7018|1:1|image|DataStructure.pm:get_computer_private_ip_address(
>>15
>> 85)|retrieved contents of /etc/hosts on this management node, contains 9
>> lines
>> 2012-03-13
>>
>>16:03:50|7018|1:1|image|DataStructure.pm:get_computer_private_ip_address(
>>16
>> 45)|returning IP address from /etc/hosts file: 10.0.0.25
>> 2012-03-13 16:03:50|7018|1:1|image|utils.pm:is_inblockrequest(6163)|zero
>> rows were returned from database select
>> 2012-03-13
>>
>>16:03:50|7018|1:1|image|DataStructure.pm:get_image_affiliation_name(2035)
>>|i
>> mage owner id: 1
>> 2012-03-13 16:03:50|7018|1:1|image|utils.pm:getnewdbh(2709)|database
>> requested (information_schema) does not match handle stored in $ENV{dbh}
>> (vcl:localhost)
>> 2012-03-13 16:03:50|7018|1:1|image|utils.pm:getnewdbh(2760)|database
>> handle stored in $ENV{dbh}
>> 2012-03-13
>>
>>16:03:50|7018|1:1|image|DataStructure.pm:retrieve_user_data(1352)|attempt
>>in
>> g to retrieve and store data for user: user.id = '1'
>> 2012-03-13 16:03:50|7018|1:1|image|utils.pm:getnewdbh(2709)|database
>> requested (vcl) does not match handle stored in $ENV{dbh}
>> (information_schema:localhost)
>> 2012-03-13 16:03:50|7018|1:1|image|utils.pm:getnewdbh(2760)|database
>> handle stored in $ENV{dbh}
>> 2012-03-13
>> 16:03:50|7018|1:1|image|DataStructure.pm:retrieve_user_data(1415)|data
>>has
>> been retrieved for user: admin (id: 1)
>> 2012-03-13 16:03:51|7018|1:1|image|utils.pm:mail(1255)|SUCCESS --
>>Sending
>> mail To: evq...@fiu.edu, PROBLEM --
>> 1:1|image|image.pm|d6100a|rh5image-rh66-v0|admin
>> |7018|1:1|image| ---- CRITICAL ----
>> |7018|1:1|image| 2012-03-13
>>
>>16:03:50|7018|1:1|image|image.pm:reservation_failed(385)|rh5image-rh66-v0
>> image creation failed
>> |7018|1:1|image| ( 0) image.pm, reservation_failed (line: 385)
>> |7018|1:1|image| (-1) image.pm, process (line: 167)
>> |7018|1:1|image| (-2) vcld, make_new_child (line: 568)
>> |7018|1:1|image| (-3) vcld, main (line: 346)
>> 2012-03-13 16:03:51|7018|1:1|image|utils.pm:mail(1255)|SUCCESS --
>>Sending
>> mail To: root@localhost, VCL -- NOTICE DELAY Image Creation rh6
>> 2012-03-13 16:03:51|7018|1:1|image|utils.pm:mail(1255)|SUCCESS --
>>Sending
>> mail To: evq...@fiu.edu, VCL -- NOTICE FAILED Image Creation rh6
>> 2012-03-13
>> 16:03:51|7018|1:1|image|utils.pm:update_request_state(1991)|request 1
>> state updated to: maintenance, laststate to: image
>> 2012-03-13
>> 16:03:51|7018|1:1|image|image.pm:reservation_failed(437)|request state
>>set
>> to maintenance, laststate to image
>> 2012-03-13
>> 16:03:51|7018|1:1|image|utils.pm:update_computer_state(2033)|computer 1
>> state updated to: maintenance
>> 2012-03-13
>>16:03:51|7018|1:1|image|image.pm:reservation_failed(445)|d6100a
>> state set to maintenance
>> 2012-03-13
>>16:03:51|7018|1:1|image|image.pm:reservation_failed(452)|exiting
>> 2012-03-13 16:03:51|7018|1:1|image|State.pm:DESTROY(829)|VCL::image
>> destructor called, address: 3e02078
>> 2012-03-13
>>
>>16:03:51|7018|1:1|image|utils.pm:delete_computerloadlog_reservation(6742)
>>|r
>> emoving computerloadlog entries matching loadstate = begin
>> 2012-03-13
>>
>>16:03:51|7018|1:1|image|utils.pm:delete_computerloadlog_reservation(6789)
>>|d
>> eleted rows from computerloadlog for reservation id=1
>> 2012-03-13 16:03:51|7018|1:1|image|State.pm:DESTROY(848)|number of
>> database handles state process created: 3
>> 2012-03-13 16:03:51|7018|1:1|image|State.pm:DESTROY(876)|VCL::image
>> process duration: 1 seconds
>> 2012-03-13 16:03:51|2012|vcld:REAPER(718)|VCL process exited for
>> reservation 1, PID: 7018, signal: CHLD
>> 2012-03-13 16:03:51|2012|vcld:main(167)|lastcheckin time updated for
>> management node 1: 2012-03-13 16:03:51
>> 2012-03-13 16:03:56|2012|vcld:main(167)|lastcheckin time updated for
>> management node 1: 2012-03-13 16:03:56
>>
>>
>>
>>
>> On 3/13/12 3:28 PM, "Evelio Quiros" <evq...@fiu.edu> wrote:
>>
>>> Hello All,
>>>
>>> Ok, I assume that I must get xCAT working before VCL is involved.
>>> So, following the instructions from the link below (thanks Andy), I
>>>setup
>>> xCAT
>>> on the management node and entered the information for my nodes (dell
>>> 6100).
>>> When I issued a command to remote install (rinstall), I get this error:
>>>
>>> Error: Install image not found in /install/rh6.0/x86_64
>>> Error: Some nodes failed to set up install resources, aborting
>>> nodeset failure at /opt/xcat/bin/rinstall line 53.
>>>
>>>
>>>
>>> So I did import the iso with the copycds command, and that seemed to be
>>> ok.
>>> I added the nodes to the various tables (nodelist, nodehm, mac).
>>>
>>> I setup dns and dhcp for the internal network.
>>>
>>> ** Second Question >> did I need to setup dhcp again if dhcp was
>>>already
>>> running on this VCL management node ?
>>>
>>> Do I need to run rinstall, or should I just try to capture an installed
>>> image ?
>>>
>>> I guess I need some really basic information, thanks for your patience.
>>>
>>> Regards,
>>> Al Quiros
>>> Florida International University
>>>
>>>
>>>
>>> On 3/7/12 3:35 PM, "Andy Kurth" <andy_ku...@ncsu.edu> wrote:
>>>
>>>> xCAT should be installed on the management node. It doesn't need to
>>>> be installed on other machines. There are a few different xCAT
>>>> installation instruction pages on their site. You may want to start
>>>> with this simpler one:
>>>>
>>>>http://sourceforge.net/apps/mediawiki/xcat/index.php?title=Basic_Instal
>>>>l_
>>>> D
>>>> HCP
>>>>
>>>> -Andy
>>>>
>>>> On Wed, Mar 7, 2012 at 3:16 PM, Evelio Quiros <evq...@fiu.edu> wrote:
>>>>> Hello,
>>>>>
>>>>> After working a while with VmWare images, we have started
>>>>>experimenting
>>>>> with
>>>>> Xcat bare metal images. To accommodate the added level of complexity
>>>>> with
>>>>> Xcat, I created a separate development environment with VCL and some
>>>>> dell
>>>>> 6100 high density nodes. I have installed RHEL 6.1 with Xcat on all
>>>>>the
>>>>> nodes. Following the instructions on the doc page, I installed
>>>>> partimage to
>>>>> the xcat installation. I think its correct, except that these are not
>>>>> IBM
>>>>> blades, so I am unsure how to build a stateless image on this
>>>>>hardware.
>>>>> Just
>>>>> attempting to capture the image "as-is" failed, and the error
>>>>>messages
>>>>> are
>>>>> below. Is there any more documentation on this process, and how to
>>>>>make
>>>>> Xcat
>>>>> work with VCL? Being new to Xcat, I guess that I am missing some
>>>>> background
>>>>> material on what is supposed to happen here. For example, the error
>>>>>log
>>>>> states that /opt/xcat does not exist, but it does exist on the node I
>>>>> was
>>>>> attempting to capture. Does Xcat need to be on the management node
>>>>>too
>>>>> ?
>>>>>
>>>>> The information I am using is located at:
>>>>>
>>>>>
>>>>>
>>>>>http://sourceforge.net/apps/mediawiki/xcat/index.php?title=Setting_Up_
>>>>>a_
>>>>> L
>>>>> inux_xCAT_Mgmt_Node
>>>>>
>>>>> And
>>>>>
>>>>>
>>>>>
>>>>>https://cwiki.apache.org/VCL/adding-support-for-partimage-and-partimag
>>>>>e-
>>>>> n
>>>>> g-to-xcat-2x-unofficial.html
>>>>>
>>>>> Any other information available ?
>>>>>
>>>>> Thanks,
>>>>> Al Quiros
>>>>> Florida International University
>>>>>
>>>>> **********************************************
>>>>>
>>>>> Error message from my attempt at capturing the image below:
>>>>>
>>>>> VCL::image object could not be created and initialized
>>>>>
>>>>>
>>>>>----------------------------------------------------------------------
>>>>>--
>>>>> time: 2012-03-07 14:49:31
>>>>> caller: vcld:make_new_child(571)
>>>>> ( 0) vcld, make_new_child (line: 571)
>>>>> (-1) vcld, main (line: 346)
>>>>>
>>>>>
>>>>>----------------------------------------------------------------------
>>>>>--
>>>>> management node: vcldev01.p.fiu.edu
>>>>> reservation PID: 12372
>>>>> parent vcld PID: 2044
>>>>>
>>>>> request ID: 1
>>>>> reservation ID: 1
>>>>> request state/laststate: image/image
>>>>> request start time: 2012-03-07 14:49:30
>>>>> request end time: 2012-03-07 15:49:30
>>>>> for imaging: no
>>>>> log ID: none
>>>>>
>>>>> computer: 6100a
>>>>> computer id: 1
>>>>> computer type: blade
>>>>> computer eth0 MAC address: <undefined>
>>>>> computer eth1 MAC address: <undefined>
>>>>> computer private IP address: 10.0.0.25
>>>>> computer public IP address: 10.106.128.14
>>>>> computer in block allocation: no
>>>>> provisioning module: VCL::Module::Provisioning::xCAT2
>>>>>
>>>>> image: rh5image-rh6xcat5-v0
>>>>> image display name: rh6xcat
>>>>> image ID: 5
>>>>> image revision ID: 5
>>>>> image size: 1450 MB
>>>>> use Sysprep: yes
>>>>> root access: yes
>>>>> image owner ID: 1
>>>>> image owner affiliation: Local
>>>>> image revision date created: 2012-03-07 14:49:29
>>>>> image revision production: yes
>>>>> OS module: VCL::Module::OS::Linux
>>>>>
>>>>> user: admin
>>>>> user name: vcl admin
>>>>> user ID: 1
>>>>> user affiliation: Local
>>>>>
>>>>>
>>>>>----------------------------------------------------------------------
>>>>>--
>>>>> RECENT LOG ENTRIES FOR THIS PROCESS:
>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set 'id' key
>>>>>for
>>>>> VCL::image object from arguments
>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set 'PID' key
>>>>> for
>>>>> VCL::image object from arguments
>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set 'DURATION'
>>>>> key
>>>>> for VCL::image object from arguments
>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set 'PPID' key
>>>>> for
>>>>> VCL::image object from arguments
>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set
>>>>> 'datemodified'
>>>>> key for VCL::image object from arguments
>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set
>>>>> 'RESERVATIONCOUNT' key for VCL::image object from arguments
>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set 'end' key
>>>>> for
>>>>> VCL::image object from arguments
>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set 'stateid'
>>>>> key for
>>>>> VCL::image object from arguments
>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set
>>>>> 'PARENTIMAGE' key
>>>>> for VCL::image object from arguments
>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set
>>>>>'checkuser'
>>>>> key
>>>>> for VCL::image object from arguments
>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set 'preload'
>>>>> key for
>>>>> VCL::image object from arguments
>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set
>>>>> 'NOTICEINTERVAL'
>>>>> key for VCL::image object from arguments
>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set 'start'
>>>>>key
>>>>> for
>>>>> VCL::image object from arguments
>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set 'logid'
>>>>>key
>>>>> for
>>>>> VCL::image object from arguments
>>>>> 2012-03-07
>>>>>
>>>>>
>>>>>14:49:31|12372|1:1|image|Module.pm:create_mn_os_object(361)|VCL::Modul
>>>>>e:
>>>>> :
>>>>> OS::Linux::ManagementNode
>>>>> module loaded
>>>>> 2012-03-07
>>>>>
>>>>>
>>>>>14:49:31|12372|1:1|image|Module.pm:new(196)|VCL::Module::OS::Linux::Ma
>>>>>na
>>>>> g
>>>>> ementNode
>>>>> object created for image <not set>, address: 2417400
>>>>> 2012-03-07
>>>>> 14:49:31|12372|1:1|image|DataStructure.pm:_automethod(834)|data
>>>>> structure updated:
>>>>> $self->request_data->{reservation}{0}{computer}{hostname}
>>>>> |12372|1:1|image| computer_hostname = vcldev01.p.fiu.edu
>>>>> 2012-03-07
>>>>> 14:49:31|12372|1:1|image|DataStructure.pm:_automethod(834)|data
>>>>> structure updated:
>>>>> $self->request_data->{reservation}{0}{computer}{NODENAME}
>>>>> |12372|1:1|image| computer_node_name = vcldev01
>>>>> 2012-03-07
>>>>> 14:49:31|12372|1:1|image|DataStructure.pm:_automethod(834)|data
>>>>> structure updated:
>>>>> $self->request_data->{reservation}{0}{computer}{SHORTNAME}
>>>>> |12372|1:1|image| computer_short_name = vcldev01
>>>>> 2012-03-07
>>>>> 14:49:31|12372|1:1|image|DataStructure.pm:_automethod(834)|data
>>>>> structure updated:
>>>>> $self->request_data->{reservation}{0}{computer}{IPaddress}
>>>>> |12372|1:1|image| computer_ip_address = 10.106.128.12
>>>>> 2012-03-07
>>>>>
>>>>>
>>>>>14:49:31|12372|1:1|image|Module.pm:create_mn_os_object(366)|VCL::Modul
>>>>>e:
>>>>> :
>>>>> OS::Linux::ManagementNode
>>>>> OS object created, address: 2417400
>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(192)|VCL::image
>>>>> object
>>>>> created for state image, address: 223a460
>>>>> 2012-03-07 14:49:31|12372|1:1|image|State.pm:initialize(86)|obtained
>>>>>a
>>>>> database handle for this state process, stored as $ENV{dbh}
>>>>> 2012-03-07 14:49:31|12372|1:1|image|State.pm:check_image_os(762)|no
>>>>> corrections need to be made to image OS: rh5image
>>>>> 2012-03-07
>>>>>
>>>>>
>>>>>14:49:31|12372|1:1|image|DataStructure.pm:is_parent_reservation(991)|r
>>>>>et
>>>>> u
>>>>> rning
>>>>> true: parent reservation ID for this request: 1
>>>>> 2012-03-07
>>>>>
>>>>>14:49:31|12372|1:1|image|utils.pm:rename_vcld_process(7098)|reservatio
>>>>>n
>>>>> count: 1
>>>>> 2012-03-07
>>>>>
>>>>>
>>>>>14:49:31|12372|1:1|image|utils.pm:rename_vcld_process(7117)|PARENTIMAG
>>>>>E:
>>>>> 1
>>>>> 2012-03-07
>>>>>
>>>>>14:49:31|12372|1:1|image|utils.pm:rename_vcld_process(7118)|SUBIMAGE:
>>>>>0
>>>>> 2012-03-07
>>>>> 14:49:31|12372|1:1|image|utils.pm:rename_vcld_process(7136)|renamed
>>>>> process
>>>>> to 'vcld 1:1 image 6100a rh5image-rh6xcat5-v0 admin'
>>>>> 2012-03-07
>>>>>
>>>>>
>>>>>14:49:31|12372|1:1|image|DataStructure.pm:is_parent_reservation(991)|r
>>>>>et
>>>>> u
>>>>> rning
>>>>> true: parent reservation ID for this request: 1
>>>>> 2012-03-07
>>>>>
>>>>>
>>>>>14:49:31|12372|1:1|image|DataStructure.pm:is_parent_reservation(991)|r
>>>>>et
>>>>> u
>>>>> rning
>>>>> true: parent reservation ID for this request: 1
>>>>> 2012-03-07
>>>>>
>>>>>
>>>>>14:49:31|12372|1:1|image|Module.pm:create_os_object(298)|VCL::Module::
>>>>>OS
>>>>> :
>>>>> :Linux
>>>>> module loaded
>>>>> 2012-03-07
>>>>>
>>>>>14:49:31|12372|1:1|image|Module.pm:create_mn_os_object(335)|management
>>>>> node
>>>>> OS object has already been created, address: 2417400, returning 1
>>>>> 2012-03-07
>>>>> 14:49:31|12372|1:1|image|Module.pm:new(196)|VCL::Module::OS::Linux
>>>>> object
>>>>> created for image rh5image-rh6xcat5-v0, address: 241a3b0
>>>>> 2012-03-07
>>>>>
>>>>>
>>>>>14:49:31|12372|1:1|image|Module.pm:create_os_object(304)|VCL::Module::
>>>>>OS
>>>>> :
>>>>> :Linux
>>>>> OS object created for rh5image-rh6xcat5-v0, address: 241a3b0
>>>>> 2012-03-07 14:49:31|12372|1:1|image|xCAT.pm:initialize(110)|XCATROOT
>>>>> environment variable is not set, using /opt/xcat
>>>>> |12372|1:1|image| ---- WARNING ----
>>>>> |12372|1:1|image| 2012-03-07
>>>>> 14:49:31|12372|1:1|image|xCAT.pm:initialize(119)|unable to initialize
>>>>> xCAT
>>>>> module, /opt/xcat directory does not exist
>>>>> |12372|1:1|image| ( 0) xCAT.pm, initialize (line: 119)
>>>>> |12372|1:1|image| (-1) xCAT.pm, (eval) (line: 3239)
>>>>> |12372|1:1|image| (-2) (eval 156), (eval) (line: 3)
>>>>> |12372|1:1|image| (-3) base.pm, import (line: 91)
>>>>> |12372|1:1|image| (-4) xCAT2.pm, BEGIN (line: 47)
>>>>> |12372|1:1|image| (-5) xCAT.pm, (eval) (line: 0)
>>>>> 2012-03-07 14:49:31|12372|1:1|image|xCAT2.pm:initialize(110)|XCATROOT
>>>>> environment variable is not set, using /opt/xcat
>>>>> |12372|1:1|image| ---- WARNING ----
>>>>> |12372|1:1|image| 2012-03-07
>>>>> 14:49:31|12372|1:1|image|xCAT2.pm:initialize(119)|unable to
>>>>>initialize
>>>>> xCAT
>>>>> module, /opt/xcat directory does not exist
>>>>> |12372|1:1|image| ( 0) xCAT2.pm, initialize (line: 119)
>>>>> |12372|1:1|image| (-1) xCAT2.pm, (eval) (line: 2178)
>>>>> |12372|1:1|image| (-2) (eval 155), BEGIN (line: 2)
>>>>> |12372|1:1|image| (-3) xCAT2.pm, (eval) (line: 0)
>>>>> |12372|1:1|image| (-4) xCAT2.pm, (eval) (line: 0)
>>>>> |12372|1:1|image| (-5) Module.pm, create_provisioning_object (line:
>>>>> 415)
>>>>> 2012-03-07
>>>>>
>>>>>
>>>>>14:49:31|12372|1:1|image|Module.pm:create_provisioning_object(420)|VCL
>>>>>::
>>>>> M
>>>>> odule::Provisioning::xCAT2
>>>>> module loaded
>>>>> 2012-03-07
>>>>>
>>>>>14:49:31|12372|1:1|image|Module.pm:create_mn_os_object(335)|management
>>>>> node
>>>>> OS object has already been created, address: 2417400, returning 1
>>>>> 2012-03-07
>>>>>
>>>>>
>>>>>14:49:31|12372|1:1|image|Module.pm:new(200)|VCL::Module::Provisioning:
>>>>>:x
>>>>> C
>>>>> AT2
>>>>> object created for computer 6100a, address: 241a548
>>>>> 2012-03-07 14:49:31|12372|1:1|image|xCAT2.pm:initialize(110)|XCATROOT
>>>>> environment variable is not set, using /opt/xcat
>>>>> |12372|1:1|image| ---- WARNING ----
>>>>> |12372|1:1|image| 2012-03-07
>>>>> 14:49:31|12372|1:1|image|xCAT2.pm:initialize(119)|unable to
>>>>>initialize
>>>>> xCAT
>>>>> module, /opt/xcat directory does not exist
>>>>> |12372|1:1|image| ( 0) xCAT2.pm, initialize (line: 119)
>>>>> |12372|1:1|image| (-1) Module.pm, new (line: 207)
>>>>> |12372|1:1|image| (-2) Module.pm, create_provisioning_object (line:
>>>>> 423)
>>>>> |12372|1:1|image| (-3) State.pm, initialize (line: 117)
>>>>> |12372|1:1|image| (-4) Module.pm, new (line: 207)
>>>>> |12372|1:1|image| (-5) vcld, make_new_child (line: 564)
>>>>> |12372|1:1|image| ---- WARNING ----
>>>>> |12372|1:1|image| 2012-03-07
>>>>>
>>>>>
>>>>>14:49:31|12372|1:1|image|Module.pm:create_provisioning_object(431)|pro
>>>>>vi
>>>>> s
>>>>> ioning
>>>>> object could not be created, returning 0
>>>>> |12372|1:1|image| ( 0) Module.pm, create_provisioning_object (line:
>>>>> 431)
>>>>> |12372|1:1|image| (-1) State.pm, initialize (line: 117)
>>>>> |12372|1:1|image| (-2) Module.pm, new (line: 207)
>>>>> |12372|1:1|image| (-3) vcld, make_new_child (line: 564)
>>>>> |12372|1:1|image| (-4) vcld, main (line: 346)
>>>>> |12372|1:1|image| ---- WARNING ----
>>>>> |12372|1:1|image| 2012-03-07
>>>>> 14:49:31|12372|1:1|image|State.pm:initialize(118)|failed to create
>>>>> provisioning object
>>>>> |12372|1:1|image| ( 0) State.pm, initialize (line: 118)
>>>>> |12372|1:1|image| (-1) Module.pm, new (line: 207)
>>>>> |12372|1:1|image| (-2) vcld, make_new_child (line: 564)
>>>>> |12372|1:1|image| (-3) vcld, main (line: 346)
>>>>> 2012-03-07 14:49:31|12372|1:1|image|State.pm:DESTROY(829)|VCL::image
>>>>> destructor called, address: 223a460
>>>>> 2012-03-07
>>>>>
>>>>>
>>>>>14:49:31|12372|1:1|image|utils.pm:delete_computerloadlog_reservation(6
>>>>>74
>>>>> 2
>>>>> )|removing
>>>>> computerloadlog entries matching loadstate = begin
>>>>> 2012-03-07
>>>>>
>>>>>
>>>>>14:49:31|12372|1:1|image|utils.pm:delete_computerloadlog_reservation(6
>>>>>78
>>>>> 9
>>>>> )|deleted
>>>>> rows from computerloadlog for reservation id=1
>>>>> 2012-03-07 14:49:31|12372|1:1|image|State.pm:DESTROY(848)|number of
>>>>> database
>>>>> handles state process created: 1
>>>>> 2012-03-07 14:49:31|12372|1:1|image|State.pm:DESTROY(876)|VCL::image
>>>>> process
>>>>> duration: 0 seconds
>>>>> 2012-03-07
>>>>>
>>>>>
>>>>>14:49:31|12372|1:1|image|DataStructure.pm:get_computer_private_ip_addr
>>>>>es
>>>>> s
>>>>> (1581)|attempting
>>>>> to retrieve private IP address for computer: 6100a
>>>>> 2012-03-07
>>>>>
>>>>>
>>>>>14:49:31|12372|1:1|image|DataStructure.pm:get_computer_private_ip_addr
>>>>>es
>>>>> s
>>>>> (1585)|retrieved
>>>>> contents of /etc/hosts on this management node, contains 9 lines
>>>>> 2012-03-07
>>>>>
>>>>>
>>>>>14:49:31|12372|1:1|image|DataStructure.pm:get_computer_private_ip_addr
>>>>>es
>>>>> s
>>>>> (1645)|returning
>>>>> IP address from /etc/hosts file: 10.0.0.25
>>>>> 2012-03-07 14:49:31|12372|1:1|image|utils.pm:getnewdbh(2703)|unable
>>>>>to
>>>>> use
>>>>> database handle stored in $ENV{dbh}
>>>>> 2012-03-07 14:49:31|12372|1:1|image|utils.pm:getnewdbh(2760)|database
>>>>> handle
>>>>> stored in $ENV{dbh}
>>>>> 2012-03-07
>>>>> 14:49:31|12372|1:1|image|utils.pm:is_inblockrequest(6163)|zero
>>>>> rows were returned from database select
>>>>> 2012-03-07
>>>>>
>>>>>
>>>>>14:49:31|12372|1:1|image|DataStructure.pm:get_image_affiliation_name(2
>>>>>03
>>>>> 5
>>>>> )|image
>>>>> owner id: 1
>>>>> 2012-03-07 14:49:31|12372|1:1|image|utils.pm:getnewdbh(2709)|database
>>>>> requested (information_schema) does not match handle stored in
>>>>> $ENV{dbh}
>>>>> (vcl:localhost)
>>>>> 2012-03-07 14:49:31|12372|1:1|image|utils.pm:getnewdbh(2760)|database
>>>>> handle
>>>>> stored in $ENV{dbh}
>>>>> 2012-03-07
>>>>>
>>>>>
>>>>>14:49:31|12372|1:1|image|DataStructure.pm:retrieve_user_data(1352)|att
>>>>>em
>>>>> p
>>>>> ting
>>>>> to retrieve and store data for user: user.id = '1'
>>>>> 2012-03-07 14:49:31|12372|1:1|image|utils.pm:getnewdbh(2709)|database
>>>>> requested (vcl) does not match handle stored in $ENV{dbh}
>>>>> (information_schema:localhost)
>>>>> 2012-03-07 14:49:31|12372|1:1|image|utils.pm:getnewdbh(2760)|database
>>>>> handle
>>>>> stored in $ENV{dbh}
>>>>> 2012-03-07
>>>>>
>>>>>14:49:31|12372|1:1|image|DataStructure.pm:retrieve_user_data(1415)|dat
>>>>>a
>>>>> has
>>>>> been retrieved for user: admin (id: 1)
>>>>>
>>>
>>
>
>--
>Dmitri Chebotarov
>Virtual Computing Lab Systems Engineer, TSD - Ent Servers & Messaging
>223 Aquia Building, Ffx, MSN: 1B5
>Phone: (703) 993-6175
>Fax: (703) 993-3404
>
>
>
