Thanks Dmitri, In following this article, I get to the bottom of the page, where I put in the 3 files needed for a stateless image.
I place the 3 files in the located indicated, and when I run nodeset d6100a image I get this: Error: vmlinuz and initrd.img not found at /tftpboot/xcat/image/x86_64 Error: Some nodes failed to set up image resources, aborting But vmlinuz and initrd.img are at /tftpboot/xcat/image/x86_64 Is there something else that needs to happen first ? Also, the last step talks about NFS servers for the image store. Are these required ? Thanks for all your help, Al Quiros On 3/14/12 4:05 PM, "Dmitri Chebotarov" <4dim...@gmail.com> wrote: >Evelio > >Please follow this article to add support for 'image' and 'install' : > >https://cwiki.apache.org/VCL/adding-support-for-partimage-and-partimage-ng >-to-xcat-2x-unofficial.html > >Thanks. > >-- >Dmitri Chebotarov > > >On Wednesday, March 14, 2012 at 15:37 , Evelio Quiros wrote: > >> Hello again, >> >> Dimitri, thanks for the advice. >> >> I have a question about these commands. >> Below, you wrote "nodeset d6100a image", >> >> But there is no image argument for nodeset. >> Here is the man page: >> >> nodeset [-h|--help|-v|--version] >> nodeset <noderange> >> >>[install|shell|boot|runcmd=bmcsetup|netboot|iscsiboot|osimage=<imagename> >>|s >> tatelite] >> >> When I try the command as-is, I get this: >> >> >> nodeset d6100a image >> d6100a: Error: Unable to identify plugin for this command, check >>relevant >> tables: nodetype.os >> Error: Some nodes failed to set up image resources, aborting >> >> I have done tabdump on the various tables, and done tabedit to modify >>them >> to my environment. >> >> >> I know this is not an xCAT list, but your guidance would be appreciated. >> >> Thanks, >> Al Quiros >> >> >> >> On 3/13/12 4:45 PM, "Dmitri Chebotarov" <dcheb...@gmu.edu >>(mailto:dcheb...@gmu.edu)> wrote: >> >> > Evelio, >> > >> > You should be able to capture image via xCAT before you can use >>VCL/xCAT. >> > >> > To capture image via xCAT: >> > >> > nodech d6100a nodetype.os=image nodetype.profile=rh5image-rh66-v0 >> > nodeset d6100a image - this will create PXEboot config file for >>d6100a: >> > >> > cat /tftpboot/pxelinux.cfg/<d6100a-PXE-if-mac> >> > >> > #image rh5image-rh66-v0 >> > DEFAULT xCAT >> > LABEL xCAT >> > KERNEL xcat/image/x86_64/vmlinuz >> > APPEND initrd=xcat/image/x86_64/initrd.img >> > >>imgurl=http://xcat-master/install/image/x86_64/installer_files/rootimg.gz >> > image=/install/image/x86_64/rh5image-rh66-v0.img blocks=512 >> > action=save installnic=eth0 reboot noipv6 >> > IPAPPEND 2 >> > >> > 'tabdump nodetype' should look similar to this - note that arch is >>x86: >> > >> > >>#node,os,arch,profile,provmethod,supportedarchs,nodetype,comments,disable >> > ... >> > "d6100a","image","x86","rh5image-rh66-v0","image","x86,x86_64",,, >> > ... >> > >> > Then do 'rpower d6100a reset'. This will restart d6100a and when node >> > boots over PXE it will boot into >> > http://xcat-master/install/image/x86_64/installer_files/rootimg.gz >>and, >> > given that image works fine and maps NFS store OK, it dump hd image to >> > /install/image/x86_64/rh5image-rh66-v0.img . >> > >> > If it's successful then to install from the image: >> > >> > nodeset d6100a install >> > >> > 'tabdump nodetype' should look similar to this - provmethod changes >>from >> > image to install: >> > >> > >>#node,os,arch,profile,provmethod,supportedarchs,nodetype,comments,disable >> > ... >> > "d6100a","image","x86","rh5image-rh66-v0","install","x86,x86_64",,, >> > ... >> > >> > If these steps work OK, then you can use VCL to capture bare-metal >>image. >> > VCL uses 'nodeset <node> image' and 'nodeset <node> install' >>commands, so >> > it's good idea to make them work before using VCL. >> > >> > Thanks. >> > On Mar 13, 2012, at 16:11 , Evelio Quiros wrote: >> > >> > > Hello Again, >> > > >> > > After trying again to capture a running image on a bare metal node, >>I >> > > get >> > > a failure message: >> > > Any ideas ? >> > > >> > > Al Q >> > > >> > > >> > > Added new image to database: 'rh6' >> > > image.name (http://image.name): rh5image-rh66-v0 >> > > image.id: 6 >> > > imagerevision.id: 6 >> > > imagemeta.id: 3 >> > > resource.id: 16 >> > > >> > > >> > > >>------------------------------------------------------------------------- >> > > -- >> > > - >> > > Inserted imaging request to the database: >> > > request ID: 1 >> > > reservation ID: 1 >> > > >> > > This process will now display the contents of the vcld.log file if >>the >> > > vcld >> > > daemon is running. If you do not see many lines of additional >>output, >> > > exit >> > > this >> > > process, start the vcld daemon, and monitor the image capture >>process by >> > > running >> > > the command: >> > > tail -f /var/log/vcld.log | grep '1:1' >> > > >> > > >> > > >>------------------------------------------------------------------------- >> > > -- >> > > - >> > > 2012-03-13 16:03:34|2012|vcld:main(167)|lastcheckin time updated for >> > > management node 1: 2012-03-13 16:03:34 >> > > 2012-03-13 >>16:03:39|6899|utils.pm:setup_get_array_choice(9947)|choices >> > > argument: >> > > 2012-03-13 16:03:39|2012|vcld:main(167)|lastcheckin time updated for >> > > management node 1: 2012-03-13 16:03:39 >> > > 2012-03-13 16:03:44|2012|vcld:main(167)|lastcheckin time updated for >> > > management node 1: 2012-03-13 16:03:44 >> > > 2012-03-13 16:03:48|6899|utils.pm:insert_request(8358)|inserted new >> > > reload >> > > request into request table, request id=1 >> > > 2012-03-13 16:03:48|6899|utils.pm:insert_request(8389)|inserted new >> > > reload >> > > request into reservation table, reservation id=1 >> > > 2012-03-13 16:03:50|2012|vcld:main(167)|lastcheckin time updated for >> > > management node 1: 2012-03-13 16:03:49 >> > > 2012-03-13 >> > > >> > > >>16:03:50|2012|1:1|image|utils.pm:reservation_being_processed(8938)|comput >> > > er >> > > loadlog 'begin' entry does NOT exist for reservation 1 >> > > 2012-03-13 >>16:03:50|2012|1:1|image|utils.pm:run_command(9010)|executed >> > > command: pgrep -fl 'vcld [0-9]+:1 ', pid: 7004, exit status: 0, >>output: >> > > 2012-03-13 >> > > >> > > >>16:03:50|2012|1:1|image|utils.pm:is_management_node_process_running(9192) >> > > |p >> > > rocess is NOT running, identifier: 'vcld [0-9]+:1 ' >> > > 2012-03-13 >> > > >> > > >>16:03:50|2012|1:1|image|utils.pm:reservation_being_processed(8959)|reserv >> > > at >> > > ion is NOT currently being processed >> > > 2012-03-13 16:03:50|2012|1:1|image|vcld:main(278)|reservation 1 is >>NOT >> > > already being processed >> > > 2012-03-13 >> > > 16:03:50|2012|1:1|image|utils.pm:get_request_info(4520)|standalone >> > > affiliation found: Local >> > > 2012-03-13 16:03:50|2012|1:1|image|vcld:main(283)|retrieved request >> > > information from database >> > > 2012-03-13 >> > > >> > > >>16:03:50|2012|1:1|image|DataStructure.pm:is_parent_reservation(991)|retur >> > > ni >> > > ng true: parent reservation ID for this request: 1 >> > > 2012-03-13 >> > > 16:03:50|2012|1:1|image|utils.pm:update_request_state(1991)|request >>1 >> > > state updated to: pending, laststate to: image >> > > 2012-03-13 >>16:03:50|2012|1:1|image|utils.pm:insertloadlog(3875)|inserted >> > > computer=1, begin, beginning to process, state is image >> > > 2012-03-13 16:03:50|2012|1:1|image|vcld:make_new_child(515)|loaded >> > > VCL::image module >> > > 2012-03-13 16:03:50|2012|1:1|image|vcld:make_new_child(539)|current >> > > number >> > > of forked kids: 1 >> > > 2012-03-13 16:03:50|7018|1:1|image|vcld:make_new_child(555)|vcld >> > > environment variable set to 0 for this process >> > > 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'test' >>key for >> > > VCL::image object from arguments >> > > 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set >>'forimaging' >> > > key >> > > for VCL::image object from arguments >> > > 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set >>'reservation' >> > > key for VCL::image object from arguments >> > > 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'userid' >>key >> > > for >> > > VCL::image object from arguments >> > > 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set >> > > 'daterequested' >> > > key for VCL::image object from arguments >> > > 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set >> > > 'RESERVATIONID' >> > > key for VCL::image object from arguments >> > > 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'UPDATED' >>key >> > > for VCL::image object from arguments >> > > 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set >>'SUBIMAGE' key >> > > for VCL::image object from arguments >> > > 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set >>'CHECKTIME' >> > > key >> > > for VCL::image object from arguments >> > > 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'state' >>key >> > > for >> > > VCL::image object from arguments >> > > 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set >>'laststate' >> > > key >> > > for VCL::image object from arguments >> > > 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set >>'PRELOADONLY' >> > > key for VCL::image object from arguments >> > > 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set >>'laststateid' >> > > key for VCL::image object from arguments >> > > 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'user' >>key for >> > > VCL::image object from arguments >> > > 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'id' key >>for >> > > VCL::image object from arguments >> > > 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'PID' key >>for >> > > VCL::image object from arguments >> > > 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set >>'DURATION' key >> > > for VCL::image object from arguments >> > > 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'PPID' >>key for >> > > VCL::image object from arguments >> > > 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set >>'datemodified' >> > > key for VCL::image object from arguments >> > > 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set >> > > 'RESERVATIONCOUNT' key for VCL::image object from arguments >> > > 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'end' key >>for >> > > VCL::image object from arguments >> > > 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'stateid' >>key >> > > for VCL::image object from arguments >> > > 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set >>'PARENTIMAGE' >> > > key for VCL::image object from arguments >> > > 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set >>'checkuser' >> > > key >> > > for VCL::image object from arguments >> > > 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'preload' >>key >> > > for VCL::image object from arguments >> > > 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set >> > > 'NOTICEINTERVAL' >> > > key for VCL::image object from arguments >> > > 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'start' >>key >> > > for >> > > VCL::image object from arguments >> > > 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'logid' >>key >> > > for >> > > VCL::image object from arguments >> > > 2012-03-13 >> > > >> > > >>16:03:50|7018|1:1|image|Module.pm:create_mn_os_object(361)|VCL::Module::O >> > > S: >> > > :Linux::ManagementNode module loaded >> > > 2012-03-13 >> > > >> > > >>16:03:50|7018|1:1|image|Module.pm:new(196)|VCL::Module::OS::Linux::Manage >> > > me >> > > ntNode object created for image <not set>, address: 3fdf4b8 >> > > 2012-03-13 >> > > 16:03:50|7018|1:1|image|DataStructure.pm:_automethod(834)|data >> > > structure updated: >> > > $self->request_data->{reservation}{0}{computer}{hostname} >> > > |7018|1:1|image| computer_hostname = vcldev01.p.fiu.edu >> > > 2012-03-13 >> > > 16:03:50|7018|1:1|image|DataStructure.pm:_automethod(834)|data >> > > structure updated: >> > > $self->request_data->{reservation}{0}{computer}{NODENAME} >> > > |7018|1:1|image| computer_node_name = vcldev01 >> > > 2012-03-13 >> > > 16:03:50|7018|1:1|image|DataStructure.pm:_automethod(834)|data >> > > structure updated: >> > > $self->request_data->{reservation}{0}{computer}{SHORTNAME} >> > > |7018|1:1|image| computer_short_name = vcldev01 >> > > 2012-03-13 >> > > 16:03:50|7018|1:1|image|DataStructure.pm:_automethod(834)|data >> > > structure updated: >> > > $self->request_data->{reservation}{0}{computer}{IPaddress} >> > > |7018|1:1|image| computer_ip_address = 10.106.128.12 >> > > 2012-03-13 >> > > >> > > >>16:03:50|7018|1:1|image|Module.pm:create_mn_os_object(366)|VCL::Module::O >> > > S: >> > > :Linux::ManagementNode OS object created, address: 3fdf4b8 >> > > 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(192)|VCL::image >>object >> > > created for state image, address: 3e02078 >> > > 2012-03-13 16:03:50|7018|1:1|image|State.pm:initialize(86)|obtained >>a >> > > database handle for this state process, stored as $ENV{dbh} >> > > 2012-03-13 16:03:50|7018|1:1|image|State.pm:check_image_os(762)|no >> > > corrections need to be made to image OS: rh5image >> > > 2012-03-13 >> > > >> > > >>16:03:50|7018|1:1|image|DataStructure.pm:is_parent_reservation(991)|retur >> > > ni >> > > ng true: parent reservation ID for this request: 1 >> > > 2012-03-13 >> > > >>16:03:50|7018|1:1|image|utils.pm:rename_vcld_process(7098)|reservation >> > > count: 1 >> > > 2012-03-13 >> > > >>16:03:50|7018|1:1|image|utils.pm:rename_vcld_process(7117)|PARENTIMAGE: >> > > 1 >> > > 2012-03-13 >> > > >>16:03:50|7018|1:1|image|utils.pm:rename_vcld_process(7118)|SUBIMAGE: 0 >> > > 2012-03-13 >> > > 16:03:50|7018|1:1|image|utils.pm:rename_vcld_process(7136)|renamed >> > > process >> > > to 'vcld 1:1 image d6100a rh5image-rh66-v0 admin' >> > > 2012-03-13 >> > > >> > > >>16:03:50|7018|1:1|image|DataStructure.pm:is_parent_reservation(991)|retur >> > > ni >> > > ng true: parent reservation ID for this request: 1 >> > > 2012-03-13 >> > > >> > > >>16:03:50|7018|1:1|image|DataStructure.pm:is_parent_reservation(991)|retur >> > > ni >> > > ng true: parent reservation ID for this request: 1 >> > > 2012-03-13 >> > > >> > > >>16:03:50|7018|1:1|image|Module.pm:create_os_object(298)|VCL::Module::OS:: >> > > Li >> > > nux module loaded >> > > 2012-03-13 >> > > >>16:03:50|7018|1:1|image|Module.pm:create_mn_os_object(335)|management >> > > node >> > > OS object has already been created, address: 3fdf4b8, returning 1 >> > > 2012-03-13 >> > > 16:03:50|7018|1:1|image|Module.pm:new(196)|VCL::Module::OS::Linux >>object >> > > created for image rh5image-rh66-v0, address: 3fe23d8 >> > > 2012-03-13 >> > > >> > > >>16:03:50|7018|1:1|image|Module.pm:create_os_object(304)|VCL::Module::OS:: >> > > Li >> > > nux OS object created for rh5image-rh66-v0, address: 3fe23d8 >> > > 2012-03-13 16:03:50|7018|1:1|image|xCAT.pm:initialize(110)|XCATROOT >> > > environment variable is not set, using /opt/xcat >> > > 2012-03-13 16:03:50|7018|1:1|image|xCAT.pm:initialize(128)|xCAT root >> > > path >> > > found: /opt/xcat >> > > 2012-03-13 16:03:50|7018|1:1|image|xCAT.pm:initialize(130)|xCAT >>module >> > > initialized >> > > 2012-03-13 16:03:50|7018|1:1|image|xCAT2.pm:initialize(110)|XCATROOT >> > > environment variable is not set, using /opt/xcat >> > > 2012-03-13 16:03:50|7018|1:1|image|xCAT2.pm:initialize(128)|xCAT >>root >> > > path >> > > found: /opt/xcat >> > > 2012-03-13 16:03:50|7018|1:1|image|xCAT2.pm:initialize(130)|xCAT >>module >> > > initialized >> > > 2012-03-13 >> > > >> > > >>16:03:50|7018|1:1|image|Module.pm:create_provisioning_object(420)|VCL::Mo >> > > du >> > > le::Provisioning::xCAT2 module loaded >> > > 2012-03-13 >> > > >>16:03:50|7018|1:1|image|Module.pm:create_mn_os_object(335)|management >> > > node >> > > OS object has already been created, address: 3fdf4b8, returning 1 >> > > 2012-03-13 >> > > >> > > >>16:03:50|7018|1:1|image|Module.pm:new(200)|VCL::Module::Provisioning::xCA >> > > T2 >> > > object created for computer d6100a, address: 3fe2570 >> > > 2012-03-13 16:03:50|7018|1:1|image|xCAT2.pm:initialize(110)|XCATROOT >> > > environment variable is not set, using /opt/xcat >> > > 2012-03-13 16:03:50|7018|1:1|image|xCAT2.pm:initialize(128)|xCAT >>root >> > > path >> > > found: /opt/xcat >> > > 2012-03-13 16:03:50|7018|1:1|image|xCAT2.pm:initialize(130)|xCAT >>module >> > > initialized >> > > 2012-03-13 >> > > >> > > >>16:03:50|7018|1:1|image|Module.pm:create_provisioning_object(426)|VCL::Mo >> > > du >> > > le::Provisioning::xCAT2 provisioner object created for d6100a, >>address: >> > > 3fe2570 >> > > 2012-03-13 >>16:03:50|7018|1:1|image|State.pm:initialize(126)|returning 1 >> > > 2012-03-13 >>16:03:50|7018|1:1|image|vcld:make_new_child(565)|VCL::image >> > > object created and initialized >> > > 2012-03-13 16:03:50|7018|1:1|image|utils.pm:mail(1255)|SUCCESS -- >> > > Sending >> > > mail To: evq...@fiu.edu (mailto:evq...@fiu.edu), VCL IMAGE Creation >>Started: rh5image-rh66-v0 >> > > 2012-03-13 >>16:03:50|7018|1:1|image|xCAT.pm:does_image_exist(2434)|image >> > > OS >> > > install type: partimage >> > > 2012-03-13 >> > > >> > > >>16:03:50|7018|1:1|image|xCAT.pm:_get_image_repository_path(2910)|manageme >> > > nt >> > > node identifier argument was not specified >> > > 2012-03-13 >> > > >> > > >>16:03:50|7018|1:1|image|xCAT.pm:_get_image_repository_path(2932)|attempti >> > > ng >> > > to determine repository path for image on vcldev01.p.fiu.edu: >> > > |7018|1:1|image| image id: 6 >> > > |7018|1:1|image| OS name: rh5image >> > > |7018|1:1|image| OS type: linux >> > > |7018|1:1|image| OS install type: partimage >> > > |7018|1:1|image| OS source path: image >> > > |7018|1:1|image| architecture: x86_64 >> > > 2012-03-13 >> > > >>16:03:50|7018|1:1|image|xCAT.pm:_get_image_repository_path(2996)|did not >> > > find any images under /images/linux_image/x86_64 on >>vcldev01.p.fiu.edu >> > > 2012-03-13 >> > > >> > > >>16:03:50|7018|1:1|image|xCAT.pm:_get_image_repository_path(3006)|returnin >> > > g >> > > repository path for vcldev01.p.fiu.edu: /images/image/x86_64 >> > > 2012-03-13 >>16:03:50|7018|1:1|image|xCAT.pm:does_image_exist(2444)|image >> > > repository path: /images/image/x86_64 >> > > 2012-03-13 >>16:03:50|7018|1:1|image|utils.pm:run_command(9010)|executed >> > > command: du -c /images/image/x86_64/*rh5image-rh66-v0* 2>&1 | grep >>total >> > > 2>&1, pid: 7030, exit status: 1, output: >> > > |7018|1:1|image| 0 total >> > > 2012-03-13 >>16:03:50|7018|1:1|image|xCAT.pm:does_image_exist(2506)|image >> > > does NOT exist: rh5image-rh66-v0 >> > > 2012-03-13 >> > > >> > > >>16:03:50|7018|1:1|image|xCAT2.pm:_get_image_template_path(2084)|managemen >> > > t >> > > node identifier argument was not specified >> > > 2012-03-13 >> > > >> > > >>16:03:50|7018|1:1|image|xCAT2.pm:_get_image_template_path(2115)|attemptin >> > > g >> > > to determine template path for image: >> > > |7018|1:1|image| image name: rh5image-rh66-v0 >> > > |7018|1:1|image| OS install type: partimage >> > > |7018|1:1|image| OS source path: image >> > > |7018|1:1|image| xCAT 2.x OS source path: image >> > > 2012-03-13 >> > > >> > > >>16:03:50|7018|1:1|image|xCAT2.pm:_get_image_template_path(2123)|returning >> > > : >> > > /opt/xcat/share/xcat/install/image >> > > 2012-03-13 >> > > 16:03:50|7018|1:1|image|xCAT.pm:does_image_exist(2518)|template >> > > repository path for rh5image-rh66-v0: >>/opt/xcat/share/xcat/install/image >> > > 2012-03-13 >> > > 16:03:50|7018|1:1|image|xCAT.pm:does_image_exist(2530)|template >> > > file does not exist: >> > > /opt/xcat/share/xcat/install/image/rh5image-rh66-v0.tmpl >> > > 2012-03-13 >>16:03:50|7018|1:1|image|xCAT.pm:does_image_exist(2570)|image >> > > rh5image-rh66-v0 does NOT exist on this management node >> > > 2012-03-13 16:03:50|7018|1:1|image|image.pm:process(145)|image >> > > rh5image-rh66-v0 does not exist in the repository >> > > 2012-03-13 >> > > 16:03:50|7018|1:1|image|DataStructure.pm:_automethod(834)|data >> > > structure updated: >> > > $self->request_data->{reservation}{1}{image}{lastupdate} >> > > |7018|1:1|image| image_lastupdate = 2012-03-13 16:03:50 >> > > 2012-03-13 >> > > 16:03:50|7018|1:1|image|DataStructure.pm:_automethod(834)|data >> > > structure updated: >> > > $self->request_data->{reservation}{1}{imagerevision}{datecreated} >> > > |7018|1:1|image| imagerevision_date_created = 2012-03-13 16:03:50 >> > > 2012-03-13 16:03:50|7018|1:1|image|image.pm:process(161)|calling >> > > provisioning module's capture() subroutine >> > > 2012-03-13 >> > > >>16:03:50|7018|1:1|image|xCAT2.pm:capture(776)|image=rh5image-rh66-v0, >> > > computer=d6100a >> > > 2012-03-13 >> > > 16:03:50|7018|1:1|image|utils.pm:run_ssh_command(5380)|executing SSH >> > > command on d6100a: >> > > |7018|1:1|image| /usr/bin/ssh -i /etc/vcl/vcl.key -o >> > > StrictHostKeyChecking=no -l root -p 22 -x d6100a 'chown root >> > > currentimage.txt; chmod 777 currentimage.txt' 2>&1 >> > > 2012-03-13 >> > > >>16:03:50|7018|1:1|image|utils.pm:run_ssh_command(5464)|run_ssh_command >> > > output: >> > > |7018|1:1|image| Warning: Permanently added 'd6100a,10.0.0.25' >>(RSA) to >> > > the list of known hosts. >> > > |7018|1:1|image| Permission denied, please try again. >> > > |7018|1:1|image| Permission denied, please try again. >> > > |7018|1:1|image| Permission denied >> > > (publickey,gssapi-keyex,gssapi-with-mic,password). >> > > 2012-03-13 >>16:03:50|7018|1:1|image|utils.pm:run_ssh_command(5474)|SSH >> > > command executed on d6100a, command: >> > > |7018|1:1|image| /usr/bin/ssh -i /etc/vcl/vcl.key -o >> > > StrictHostKeyChecking=no -l root -p 22 -x d6100a 'chown root >> > > currentimage.txt; chmod 777 currentimage.txt' 2>&1 >> > > |7018|1:1|image| returning (255, "Warning: Permanently added >>'d6...") >> > > 2012-03-13 >> > > >>16:03:50|7018|1:1|image|utils.pm:write_currentimage_txt(5685)|updated >> > > ownership and permissions on currentimage.txt >> > > 2012-03-13 >> > > 16:03:50|7018|1:1|image|utils.pm:run_ssh_command(5380)|executing SSH >> > > command on d6100a: >> > > |7018|1:1|image| /usr/bin/ssh -i /etc/vcl/vcl.key -o >> > > StrictHostKeyChecking=no -l root -p 22 -x d6100a 'echo -e >> > > >> > > >>"rh5image-rh66-v0\r\nid=6\r\nprettyname=rh6\r\nimagerevision_id=6\r\nimag >> > > er >> > > evision_datecreated=2012-03-13 >> > > 16:03:50\r\ncomputer_id=1\r\ncomputer_hostname=d6100a" > >> > > currentimage.txt >> > > && cat currentimage.txt' 2>&1 >> > > 2012-03-13 >> > > >>16:03:50|7018|1:1|image|utils.pm:run_ssh_command(5464)|run_ssh_command >> > > output: >> > > |7018|1:1|image| Warning: Permanently added 'd6100a,10.0.0.25' >>(RSA) to >> > > the list of known hosts. >> > > |7018|1:1|image| Permission denied, please try again. >> > > |7018|1:1|image| Permission denied, please try again. >> > > |7018|1:1|image| Permission denied >> > > (publickey,gssapi-keyex,gssapi-with-mic,password). >> > > 2012-03-13 >>16:03:50|7018|1:1|image|utils.pm:run_ssh_command(5474)|SSH >> > > command executed on d6100a, command: >> > > |7018|1:1|image| /usr/bin/ssh -i /etc/vcl/vcl.key -o >> > > StrictHostKeyChecking=no -l root -p 22 -x d6100a 'echo -e >> > > >> > > >>"rh5image-rh66-v0\r\nid=6\r\nprettyname=rh6\r\nimagerevision_id=6\r\nimag >> > > er >> > > evision_datecreated=2012-03-13 >> > > 16:03:50\r\ncomputer_id=1\r\ncomputer_hostname=d6100a" > >> > > currentimage.txt >> > > && cat currentimage.txt' 2>&1 >> > > |7018|1:1|image| returning (255, "Warning: Permanently added >>'d6...") >> > > |7018|1:1|image| ---- WARNING ---- >> > > |7018|1:1|image| 2012-03-13 >> > > >>16:03:50|7018|1:1|image|utils.pm:write_currentimage_txt(5699)|failed to >> > > create currentimage.txt file on d6100a: >> > > |7018|1:1|image| Warning: Permanently added 'd6100a,10.0.0.25' >>(RSA) to >> > > the list of known hosts. >> > > |7018|1:1|image| Permission denied, please try again. >> > > |7018|1:1|image| Permission denied, please try again. >> > > |7018|1:1|image| Permission denied >> > > (publickey,gssapi-keyex,gssapi-with-mic,password). >> > > |7018|1:1|image| ( 0) utils.pm, write_currentimage_txt (line: 5699) >> > > |7018|1:1|image| (-1) xCAT2.pm, capture (line: 779) >> > > |7018|1:1|image| (-2) image.pm, process (line: 162) >> > > |7018|1:1|image| (-3) vcld, make_new_child (line: 568) >> > > |7018|1:1|image| (-4) vcld, main (line: 346) >> > > |7018|1:1|image| ---- WARNING ---- >> > > |7018|1:1|image| 2012-03-13 >> > > 16:03:50|7018|1:1|image|xCAT2.pm:capture(783)|unable to update >> > > currentimage.txt on d6100a >> > > |7018|1:1|image| ( 0) xCAT2.pm, capture (line: 783) >> > > |7018|1:1|image| (-1) image.pm, process (line: 162) >> > > |7018|1:1|image| (-2) vcld, make_new_child (line: 568) >> > > |7018|1:1|image| (-3) vcld, main (line: 346) >> > > |7018|1:1|image| ---- WARNING ---- >> > > |7018|1:1|image| 2012-03-13 >> > > 16:03:50|7018|1:1|image|image.pm:process(166)|rh5image-rh66-v0 image >> > > failed to be captured by provisioning module >> > > |7018|1:1|image| ( 0) image.pm, process (line: 166) >> > > |7018|1:1|image| (-1) vcld, make_new_child (line: 568) >> > > |7018|1:1|image| (-2) vcld, main (line: 346) >> > > 2012-03-13 >> > > >> > > >>16:03:50|7018|1:1|image|DataStructure.pm:get_computer_private_ip_address( >> > > 15 >> > > 81)|attempting to retrieve private IP address for computer: d6100a >> > > 2012-03-13 >> > > >> > > >>16:03:50|7018|1:1|image|DataStructure.pm:get_computer_private_ip_address( >> > > 15 >> > > 85)|retrieved contents of /etc/hosts on this management node, >>contains 9 >> > > lines >> > > 2012-03-13 >> > > >> > > >>16:03:50|7018|1:1|image|DataStructure.pm:get_computer_private_ip_address( >> > > 16 >> > > 45)|returning IP address from /etc/hosts file: 10.0.0.25 >> > > 2012-03-13 >>16:03:50|7018|1:1|image|utils.pm:is_inblockrequest(6163)|zero >> > > rows were returned from database select >> > > 2012-03-13 >> > > >> > > >>16:03:50|7018|1:1|image|DataStructure.pm:get_image_affiliation_name(2035) >> > > |i >> > > mage owner id: 1 >> > > 2012-03-13 16:03:50|7018|1:1|image|utils.pm:getnewdbh(2709)|database >> > > requested (information_schema) does not match handle stored in >>$ENV{dbh} >> > > (vcl:localhost) >> > > 2012-03-13 16:03:50|7018|1:1|image|utils.pm:getnewdbh(2760)|database >> > > handle stored in $ENV{dbh} >> > > 2012-03-13 >> > > >> > > >>16:03:50|7018|1:1|image|DataStructure.pm:retrieve_user_data(1352)|attempt >> > > in >> > > g to retrieve and store data for user: user.id = '1' >> > > 2012-03-13 16:03:50|7018|1:1|image|utils.pm:getnewdbh(2709)|database >> > > requested (vcl) does not match handle stored in $ENV{dbh} >> > > (information_schema:localhost) >> > > 2012-03-13 16:03:50|7018|1:1|image|utils.pm:getnewdbh(2760)|database >> > > handle stored in $ENV{dbh} >> > > 2012-03-13 >> > > >>16:03:50|7018|1:1|image|DataStructure.pm:retrieve_user_data(1415)|data >> > > has >> > > been retrieved for user: admin (id: 1) >> > > 2012-03-13 16:03:51|7018|1:1|image|utils.pm:mail(1255)|SUCCESS -- >> > > Sending >> > > mail To: evq...@fiu.edu (mailto:evq...@fiu.edu), PROBLEM -- >> > > 1:1|image|image.pm|d6100a|rh5image-rh66-v0|admin >> > > |7018|1:1|image| ---- CRITICAL ---- >> > > |7018|1:1|image| 2012-03-13 >> > > >> > > >>16:03:50|7018|1:1|image|image.pm:reservation_failed(385)|rh5image-rh66-v0 >> > > image creation failed >> > > |7018|1:1|image| ( 0) image.pm, reservation_failed (line: 385) >> > > |7018|1:1|image| (-1) image.pm, process (line: 167) >> > > |7018|1:1|image| (-2) vcld, make_new_child (line: 568) >> > > |7018|1:1|image| (-3) vcld, main (line: 346) >> > > 2012-03-13 16:03:51|7018|1:1|image|utils.pm:mail(1255)|SUCCESS -- >> > > Sending >> > > mail To: root@localhost, VCL -- NOTICE DELAY Image Creation rh6 >> > > 2012-03-13 16:03:51|7018|1:1|image|utils.pm:mail(1255)|SUCCESS -- >> > > Sending >> > > mail To: evq...@fiu.edu (mailto:evq...@fiu.edu), VCL -- NOTICE >>FAILED Image Creation rh6 >> > > 2012-03-13 >> > > 16:03:51|7018|1:1|image|utils.pm:update_request_state(1991)|request >>1 >> > > state updated to: maintenance, laststate to: image >> > > 2012-03-13 >> > > 16:03:51|7018|1:1|image|image.pm:reservation_failed(437)|request >>state >> > > set >> > > to maintenance, laststate to image >> > > 2012-03-13 >> > > >>16:03:51|7018|1:1|image|utils.pm:update_computer_state(2033)|computer 1 >> > > state updated to: maintenance >> > > 2012-03-13 >> > > 16:03:51|7018|1:1|image|image.pm:reservation_failed(445)|d6100a >> > > state set to maintenance >> > > 2012-03-13 >> > > 16:03:51|7018|1:1|image|image.pm:reservation_failed(452)|exiting >> > > 2012-03-13 16:03:51|7018|1:1|image|State.pm:DESTROY(829)|VCL::image >> > > destructor called, address: 3e02078 >> > > 2012-03-13 >> > > >> > > >>16:03:51|7018|1:1|image|utils.pm:delete_computerloadlog_reservation(6742) >> > > |r >> > > emoving computerloadlog entries matching loadstate = begin >> > > 2012-03-13 >> > > >> > > >>16:03:51|7018|1:1|image|utils.pm:delete_computerloadlog_reservation(6789) >> > > |d >> > > eleted rows from computerloadlog for reservation id=1 >> > > 2012-03-13 16:03:51|7018|1:1|image|State.pm:DESTROY(848)|number of >> > > database handles state process created: 3 >> > > 2012-03-13 16:03:51|7018|1:1|image|State.pm:DESTROY(876)|VCL::image >> > > process duration: 1 seconds >> > > 2012-03-13 16:03:51|2012|vcld:REAPER(718)|VCL process exited for >> > > reservation 1, PID: 7018, signal: CHLD >> > > 2012-03-13 16:03:51|2012|vcld:main(167)|lastcheckin time updated for >> > > management node 1: 2012-03-13 16:03:51 >> > > 2012-03-13 16:03:56|2012|vcld:main(167)|lastcheckin time updated for >> > > management node 1: 2012-03-13 16:03:56 >> > > >> > > >> > > >> > > >> > > On 3/13/12 3:28 PM, "Evelio Quiros" <evq...@fiu.edu >>(mailto:evq...@fiu.edu)> wrote: >> > > >> > > > Hello All, >> > > > >> > > > Ok, I assume that I must get xCAT working before VCL is involved. >> > > > So, following the instructions from the link below (thanks Andy), >>I >> > > > setup >> > > > xCAT >> > > > on the management node and entered the information for my nodes >>(dell >> > > > 6100). >> > > > When I issued a command to remote install (rinstall), I get this >>error: >> > > > >> > > > Error: Install image not found in /install/rh6.0/x86_64 >> > > > Error: Some nodes failed to set up install resources, aborting >> > > > nodeset failure at /opt/xcat/bin/rinstall line 53. >> > > > >> > > > >> > > > >> > > > So I did import the iso with the copycds command, and that seemed >>to be >> > > > ok. >> > > > I added the nodes to the various tables (nodelist, nodehm, mac). >> > > > >> > > > I setup dns and dhcp for the internal network. >> > > > >> > > > ** Second Question >> did I need to setup dhcp again if dhcp was >> > > > already >> > > > running on this VCL management node ? >> > > > >> > > > Do I need to run rinstall, or should I just try to capture an >>installed >> > > > image ? >> > > > >> > > > I guess I need some really basic information, thanks for your >>patience. >> > > > >> > > > Regards, >> > > > Al Quiros >> > > > Florida International University >> > > > >> > > > >> > > > >> > > > On 3/7/12 3:35 PM, "Andy Kurth" <andy_ku...@ncsu.edu >>(mailto:andy_ku...@ncsu.edu)> wrote: >> > > > >> > > > > xCAT should be installed on the management node. It doesn't >>need to >> > > > > be installed on other machines. There are a few different xCAT >> > > > > installation instruction pages on their site. You may want to >>start >> > > > > with this simpler one: >> > > > > >> > > > > >>http://sourceforge.net/apps/mediawiki/xcat/index.php?title=Basic_Instal >> > > > > l_ >> > > > > D >> > > > > HCP >> > > > > >> > > > > -Andy >> > > > > >> > > > > On Wed, Mar 7, 2012 at 3:16 PM, Evelio Quiros <evq...@fiu.edu >>(mailto:evq...@fiu.edu)> wrote: >> > > > > > Hello, >> > > > > > >> > > > > > After working a while with VmWare images, we have started >> > > > > > experimenting >> > > > > > with >> > > > > > Xcat bare metal images. To accommodate the added level of >>complexity >> > > > > > with >> > > > > > Xcat, I created a separate development environment with VCL >>and some >> > > > > > dell >> > > > > > 6100 high density nodes. I have installed RHEL 6.1 with Xcat >>on all >> > > > > > the >> > > > > > nodes. Following the instructions on the doc page, I installed >> > > > > > partimage to >> > > > > > the xcat installation. I think its correct, except that these >>are not >> > > > > > IBM >> > > > > > blades, so I am unsure how to build a stateless image on this >> > > > > > hardware. >> > > > > > Just >> > > > > > attempting to capture the image "as-is" failed, and the error >> > > > > > messages >> > > > > > are >> > > > > > below. Is there any more documentation on this process, and >>how to >> > > > > > make >> > > > > > Xcat >> > > > > > work with VCL? Being new to Xcat, I guess that I am missing >>some >> > > > > > background >> > > > > > material on what is supposed to happen here. For example, the >>error >> > > > > > log >> > > > > > states that /opt/xcat does not exist, but it does exist on >>the node I >> > > > > > was >> > > > > > attempting to capture. Does Xcat need to be on the management >>node >> > > > > > too >> > > > > > ? >> > > > > > >> > > > > > The information I am using is located at: >> > > > > > >> > > > > > >> > > > > > >> > > > > > >>http://sourceforge.net/apps/mediawiki/xcat/index.php?title=Setting_Up_ >> > > > > > a_ >> > > > > > L >> > > > > > inux_xCAT_Mgmt_Node >> > > > > > >> > > > > > And >> > > > > > >> > > > > > >> > > > > > >> > > > > > >>https://cwiki.apache.org/VCL/adding-support-for-partimage-and-partimag >> > > > > > e- >> > > > > > n >> > > > > > g-to-xcat-2x-unofficial.html >> > > > > > >> > > > > > Any other information available ? >> > > > > > >> > > > > > Thanks, >> > > > > > Al Quiros >> > > > > > Florida International University >> > > > > > >> > > > > > ********************************************** >> > > > > > >> > > > > > Error message from my attempt at capturing the image below: >> > > > > > >> > > > > > VCL::image object could not be created and initialized >> > > > > > >> > > > > > >> > > > > > >>---------------------------------------------------------------------- >> > > > > > -- >> > > > > > time: 2012-03-07 14:49:31 >> > > > > > caller: vcld:make_new_child(571) >> > > > > > ( 0) vcld, make_new_child (line: 571) >> > > > > > (-1) vcld, main (line: 346) >> > > > > > >> > > > > > >> > > > > > >>---------------------------------------------------------------------- >> > > > > > -- >> > > > > > management node: vcldev01.p.fiu.edu >> > > > > > reservation PID: 12372 >> > > > > > parent vcld PID: 2044 >> > > > > > >> > > > > > request ID: 1 >> > > > > > reservation ID: 1 >> > > > > > request state/laststate: image/image >> > > > > > request start time: 2012-03-07 14:49:30 >> > > > > > request end time: 2012-03-07 15:49:30 >> > > > > > for imaging: no >> > > > > > log ID: none >> > > > > > >> > > > > > computer: 6100a >> > > > > > computer id: 1 >> > > > > > computer type: blade >> > > > > > computer eth0 MAC address: <undefined> >> > > > > > computer eth1 MAC address: <undefined> >> > > > > > computer private IP address: 10.0.0.25 >> > > > > > computer public IP address: 10.106.128.14 >> > > > > > computer in block allocation: no >> > > > > > provisioning module: VCL::Module::Provisioning::xCAT2 >> > > > > > >> > > > > > image: rh5image-rh6xcat5-v0 >> > > > > > image display name: rh6xcat >> > > > > > image ID: 5 >> > > > > > image revision ID: 5 >> > > > > > image size: 1450 MB >> > > > > > use Sysprep: yes >> > > > > > root access: yes >> > > > > > image owner ID: 1 >> > > > > > image owner affiliation: Local >> > > > > > image revision date created: 2012-03-07 14:49:29 >> > > > > > image revision production: yes >> > > > > > OS module: VCL::Module::OS::Linux >> > > > > > >> > > > > > user: admin >> > > > > > user name: vcl admin >> > > > > > user ID: 1 >> > > > > > user affiliation: Local >> > > > > > >> > > > > > >> > > > > > >>---------------------------------------------------------------------- >> > > > > > -- >> > > > > > RECENT LOG ENTRIES FOR THIS PROCESS: >> > > > > > 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set >>'id' key >> > > > > > for >> > > > > > VCL::image object from arguments >> > > > > > 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set >>'PID' key >> > > > > > for >> > > > > > VCL::image object from arguments >> > > > > > 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set >>'DURATION' >> > > > > > key >> > > > > > for VCL::image object from arguments >> > > > > > 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set >>'PPID' key >> > > > > > for >> > > > > > VCL::image object from arguments >> > > > > > 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set >> > > > > > 'datemodified' >> > > > > > key for VCL::image object from arguments >> > > > > > 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set >> > > > > > 'RESERVATIONCOUNT' key for VCL::image object from arguments >> > > > > > 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set >>'end' key >> > > > > > for >> > > > > > VCL::image object from arguments >> > > > > > 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set >>'stateid' >> > > > > > key for >> > > > > > VCL::image object from arguments >> > > > > > 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set >> > > > > > 'PARENTIMAGE' key >> > > > > > for VCL::image object from arguments >> > > > > > 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set >> > > > > > 'checkuser' >> > > > > > key >> > > > > > for VCL::image object from arguments >> > > > > > 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set >>'preload' >> > > > > > key for >> > > > > > VCL::image object from arguments >> > > > > > 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set >> > > > > > 'NOTICEINTERVAL' >> > > > > > key for VCL::image object from arguments >> > > > > > 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set >>'start' >> > > > > > key >> > > > > > for >> > > > > > VCL::image object from arguments >> > > > > > 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set >>'logid' >> > > > > > key >> > > > > > for >> > > > > > VCL::image object from arguments >> > > > > > 2012-03-07 >> > > > > > >> > > > > > >> > > > > > >>14:49:31|12372|1:1|image|Module.pm:create_mn_os_object(361)|VCL::Modul >> > > > > > e: >> > > > > > : >> > > > > > OS::Linux::ManagementNode >> > > > > > module loaded >> > > > > > 2012-03-07 >> > > > > > >> > > > > > >> > > > > > >>14:49:31|12372|1:1|image|Module.pm:new(196)|VCL::Module::OS::Linux::Ma >> > > > > > na >> > > > > > g >> > > > > > ementNode >> > > > > > object created for image <not set>, address: 2417400 >> > > > > > 2012-03-07 >> > > > > > >>14:49:31|12372|1:1|image|DataStructure.pm:_automethod(834)|data >> > > > > > structure updated: >> > > > > > $self->request_data->{reservation}{0}{computer}{hostname} >> > > > > > |12372|1:1|image| computer_hostname = vcldev01.p.fiu.edu >> > > > > > 2012-03-07 >> > > > > > >>14:49:31|12372|1:1|image|DataStructure.pm:_automethod(834)|data >> > > > > > structure updated: >> > > > > > $self->request_data->{reservation}{0}{computer}{NODENAME} >> > > > > > |12372|1:1|image| computer_node_name = vcldev01 >> > > > > > 2012-03-07 >> > > > > > >>14:49:31|12372|1:1|image|DataStructure.pm:_automethod(834)|data >> > > > > > structure updated: >> > > > > > $self->request_data->{reservation}{0}{computer}{SHORTNAME} >> > > > > > |12372|1:1|image| computer_short_name = vcldev01 >> > > > > > 2012-03-07 >> > > > > > >>14:49:31|12372|1:1|image|DataStructure.pm:_automethod(834)|data >> > > > > > structure updated: >> > > > > > $self->request_data->{reservation}{0}{computer}{IPaddress} >> > > > > > |12372|1:1|image| computer_ip_address = 10.106.128.12 >> > > > > > 2012-03-07 >> > > > > > >> > > > > > >> > > > > > >>14:49:31|12372|1:1|image|Module.pm:create_mn_os_object(366)|VCL::Modul >> > > > > > e: >> > > > > > : >> > > > > > OS::Linux::ManagementNode >> > > > > > OS object created, address: 2417400 >> > > > > > 2012-03-07 >>14:49:31|12372|1:1|image|Module.pm:new(192)|VCL::image >> > > > > > object >> > > > > > created for state image, address: 223a460 >> > > > > > 2012-03-07 >>14:49:31|12372|1:1|image|State.pm:initialize(86)|obtained >> > > > > > a >> > > > > > database handle for this state process, stored as $ENV{dbh} >> > > > > > 2012-03-07 >>14:49:31|12372|1:1|image|State.pm:check_image_os(762)|no >> > > > > > corrections need to be made to image OS: rh5image >> > > > > > 2012-03-07 >> > > > > > >> > > > > > >> > > > > > >>14:49:31|12372|1:1|image|DataStructure.pm:is_parent_reservation(991)|r >> > > > > > et >> > > > > > u >> > > > > > rning >> > > > > > true: parent reservation ID for this request: 1 >> > > > > > 2012-03-07 >> > > > > > >> > > > > > >>14:49:31|12372|1:1|image|utils.pm:rename_vcld_process(7098)|reservatio >> > > > > > n >> > > > > > count: 1 >> > > > > > 2012-03-07 >> > > > > > >> > > > > > >> > > > > > >>14:49:31|12372|1:1|image|utils.pm:rename_vcld_process(7117)|PARENTIMAG >> > > > > > E: >> > > > > > 1 >> > > > > > 2012-03-07 >> > > > > > >> > > > > > >>14:49:31|12372|1:1|image|utils.pm:rename_vcld_process(7118)|SUBIMAGE: >> > > > > > 0 >> > > > > > 2012-03-07 >> > > > > > >>14:49:31|12372|1:1|image|utils.pm:rename_vcld_process(7136)|renamed >> > > > > > process >> > > > > > to 'vcld 1:1 image 6100a rh5image-rh6xcat5-v0 admin' >> > > > > > 2012-03-07 >> > > > > > >> > > > > > >> > > > > > >>14:49:31|12372|1:1|image|DataStructure.pm:is_parent_reservation(991)|r >> > > > > > et >> > > > > > u >> > > > > > rning >> > > > > > true: parent reservation ID for this request: 1 >> > > > > > 2012-03-07 >> > > > > > >> > > > > > >> > > > > > >>14:49:31|12372|1:1|image|DataStructure.pm:is_parent_reservation(991)|r >> > > > > > et >> > > > > > u >> > > > > > rning >> > > > > > true: parent reservation ID for this request: 1 >> > > > > > 2012-03-07 >> > > > > > >> > > > > > >> > > > > > >>14:49:31|12372|1:1|image|Module.pm:create_os_object(298)|VCL::Module:: >> > > > > > OS >> > > > > > : >> > > > > > :Linux >> > > > > > module loaded >> > > > > > 2012-03-07 >> > > > > > >> > > > > > >>14:49:31|12372|1:1|image|Module.pm:create_mn_os_object(335)|management >> > > > > > node >> > > > > > OS object has already been created, address: 2417400, >>returning 1 >> > > > > > 2012-03-07 >> > > > > > >>14:49:31|12372|1:1|image|Module.pm:new(196)|VCL::Module::OS::Linux >> > > > > > object >> > > > > > created for image rh5image-rh6xcat5-v0, address: 241a3b0 >> > > > > > 2012-03-07 >> > > > > > >> > > > > > >> > > > > > >>14:49:31|12372|1:1|image|Module.pm:create_os_object(304)|VCL::Module:: >> > > > > > OS >> > > > > > : >> > > > > > :Linux >> > > > > > OS object created for rh5image-rh6xcat5-v0, address: 241a3b0 >> > > > > > 2012-03-07 >>14:49:31|12372|1:1|image|xCAT.pm:initialize(110)|XCATROOT >> > > > > > environment variable is not set, using /opt/xcat >> > > > > > |12372|1:1|image| ---- WARNING ---- >> > > > > > |12372|1:1|image| 2012-03-07 >> > > > > > 14:49:31|12372|1:1|image|xCAT.pm:initialize(119)|unable to >>initialize >> > > > > > xCAT >> > > > > > module, /opt/xcat directory does not exist >> > > > > > |12372|1:1|image| ( 0) xCAT.pm, initialize (line: 119) >> > > > > > |12372|1:1|image| (-1) xCAT.pm, (eval) (line: 3239) >> > > > > > |12372|1:1|image| (-2) (eval 156), (eval) (line: 3) >> > > > > > |12372|1:1|image| (-3) base.pm, import (line: 91) >> > > > > > |12372|1:1|image| (-4) xCAT2.pm, BEGIN (line: 47) >> > > > > > |12372|1:1|image| (-5) xCAT.pm, (eval) (line: 0) >> > > > > > 2012-03-07 >>14:49:31|12372|1:1|image|xCAT2.pm:initialize(110)|XCATROOT >> > > > > > environment variable is not set, using /opt/xcat >> > > > > > |12372|1:1|image| ---- WARNING ---- >> > > > > > |12372|1:1|image| 2012-03-07 >> > > > > > 14:49:31|12372|1:1|image|xCAT2.pm:initialize(119)|unable to >> > > > > > initialize >> > > > > > xCAT >> > > > > > module, /opt/xcat directory does not exist >> > > > > > |12372|1:1|image| ( 0) xCAT2.pm, initialize (line: 119) >> > > > > > |12372|1:1|image| (-1) xCAT2.pm, (eval) (line: 2178) >> > > > > > |12372|1:1|image| (-2) (eval 155), BEGIN (line: 2) >> > > > > > |12372|1:1|image| (-3) xCAT2.pm, (eval) (line: 0) >> > > > > > |12372|1:1|image| (-4) xCAT2.pm, (eval) (line: 0) >> > > > > > |12372|1:1|image| (-5) Module.pm, create_provisioning_object >>(line: >> > > > > > 415) >> > > > > > 2012-03-07 >> > > > > > >> > > > > > >> > > > > > >>14:49:31|12372|1:1|image|Module.pm:create_provisioning_object(420)|VCL >> > > > > > :: >> > > > > > M >> > > > > > odule::Provisioning::xCAT2 >> > > > > > module loaded >> > > > > > 2012-03-07 >> > > > > > >> > > > > > >>14:49:31|12372|1:1|image|Module.pm:create_mn_os_object(335)|management >> > > > > > node >> > > > > > OS object has already been created, address: 2417400, >>returning 1 >> > > > > > 2012-03-07 >> > > > > > >> > > > > > >> > > > > > >>14:49:31|12372|1:1|image|Module.pm:new(200)|VCL::Module::Provisioning: >> > > > > > :x >> > > > > > C >> > > > > > AT2 >> > > > > > object created for computer 6100a, address: 241a548 >> > > > > > 2012-03-07 >>14:49:31|12372|1:1|image|xCAT2.pm:initialize(110)|XCATROOT >> > > > > > environment variable is not set, using /opt/xcat >> > > > > > |12372|1:1|image| ---- WARNING ---- >> > > > > > |12372|1:1|image| 2012-03-07 >> > > > > > 14:49:31|12372|1:1|image|xCAT2.pm:initialize(119)|unable to >> > > > > > initialize >> > > > > > xCAT >> > > > > > module, /opt/xcat directory does not exist >> > > > > > |12372|1:1|image| ( 0) xCAT2.pm, initialize (line: 119) >> > > > > > |12372|1:1|image| (-1) Module.pm, new (line: 207) >> > > > > > |12372|1:1|image| (-2) Module.pm, create_provisioning_object >>(line: >> > > > > > 423) >> > > > > > |12372|1:1|image| (-3) State.pm, initialize (line: 117) >> > > > > > |12372|1:1|image| (-4) Module.pm, new (line: 207) >> > > > > > |12372|1:1|image| (-5) vcld, make_new_child (line: 564) >> > > > > > |12372|1:1|image| ---- WARNING ---- >> > > > > > |12372|1:1|image| 2012-03-07 >> > > > > > >> > > > > > >> > > > > > >>14:49:31|12372|1:1|image|Module.pm:create_provisioning_object(431)|pro >> > > > > > vi >> > > > > > s >> > > > > > ioning >> > > > > > object could not be created, returning 0 >> > > > > > |12372|1:1|image| ( 0) Module.pm, create_provisioning_object >>(line: >> > > > > > 431) >> > > > > > |12372|1:1|image| (-1) State.pm, initialize (line: 117) >> > > > > > |12372|1:1|image| (-2) Module.pm, new (line: 207) >> > > > > > |12372|1:1|image| (-3) vcld, make_new_child (line: 564) >> > > > > > |12372|1:1|image| (-4) vcld, main (line: 346) >> > > > > > |12372|1:1|image| ---- WARNING ---- >> > > > > > |12372|1:1|image| 2012-03-07 >> > > > > > 14:49:31|12372|1:1|image|State.pm:initialize(118)|failed to >>create >> > > > > > provisioning object >> > > > > > |12372|1:1|image| ( 0) State.pm, initialize (line: 118) >> > > > > > |12372|1:1|image| (-1) Module.pm, new (line: 207) >> > > > > > |12372|1:1|image| (-2) vcld, make_new_child (line: 564) >> > > > > > |12372|1:1|image| (-3) vcld, main (line: 346) >> > > > > > 2012-03-07 >>14:49:31|12372|1:1|image|State.pm:DESTROY(829)|VCL::image >> > > > > > destructor called, address: 223a460 >> > > > > > 2012-03-07 >> > > > > > >> > > > > > >> > > > > > >>14:49:31|12372|1:1|image|utils.pm:delete_computerloadlog_reservation(6 >> > > > > > 74 >> > > > > > 2 >> > > > > > )|removing >> > > > > > computerloadlog entries matching loadstate = begin >> > > > > > 2012-03-07 >> > > > > > >> > > > > > >> > > > > > >>14:49:31|12372|1:1|image|utils.pm:delete_computerloadlog_reservation(6 >> > > > > > 78 >> > > > > > 9 >> > > > > > )|deleted >> > > > > > rows from computerloadlog for reservation id=1 >> > > > > > 2012-03-07 >>14:49:31|12372|1:1|image|State.pm:DESTROY(848)|number of >> > > > > > database >> > > > > > handles state process created: 1 >> > > > > > 2012-03-07 >>14:49:31|12372|1:1|image|State.pm:DESTROY(876)|VCL::image >> > > > > > process >> > > > > > duration: 0 seconds >> > > > > > 2012-03-07 >> > > > > > >> > > > > > >> > > > > > >>14:49:31|12372|1:1|image|DataStructure.pm:get_computer_private_ip_addr >> > > > > > es >> > > > > > s >> > > > > > (1581)|attempting >> > > > > > to retrieve private IP address for computer: 6100a >> > > > > > 2012-03-07 >> > > > > > >> > > > > > >> > > > > > >>14:49:31|12372|1:1|image|DataStructure.pm:get_computer_private_ip_addr >> > > > > > es >> > > > > > s >> > > > > > (1585)|retrieved >> > > > > > contents of /etc/hosts on this management node, contains 9 >>lines >> > > > > > 2012-03-07 >> > > > > > >> > > > > > >> > > > > > >>14:49:31|12372|1:1|image|DataStructure.pm:get_computer_private_ip_addr >> > > > > > es >> > > > > > s >> > > > > > (1645)|returning >> > > > > > IP address from /etc/hosts file: 10.0.0.25 >> > > > > > 2012-03-07 >>14:49:31|12372|1:1|image|utils.pm:getnewdbh(2703)|unable >> > > > > > to >> > > > > > use >> > > > > > database handle stored in $ENV{dbh} >> > > > > > 2012-03-07 >>14:49:31|12372|1:1|image|utils.pm:getnewdbh(2760)|database >> > > > > > handle >> > > > > > stored in $ENV{dbh} >> > > > > > 2012-03-07 >> > > > > > 14:49:31|12372|1:1|image|utils.pm:is_inblockrequest(6163)|zero >> > > > > > rows were returned from database select >> > > > > > 2012-03-07 >> > > > > > >> > > > > > >> > > > > > >>14:49:31|12372|1:1|image|DataStructure.pm:get_image_affiliation_name(2 >> > > > > > 03 >> > > > > > 5 >> > > > > > )|image >> > > > > > owner id: 1 >> > > > > > 2012-03-07 >>14:49:31|12372|1:1|image|utils.pm:getnewdbh(2709)|database >> > > > > > requested (information_schema) does not match handle stored >>in >> > > > > > $ENV{dbh} >> > > > > > (vcl:localhost) >> > > > > > 2012-03-07 >>14:49:31|12372|1:1|image|utils.pm:getnewdbh(2760)|database >> > > > > > handle >> > > > > > stored in $ENV{dbh} >> > > > > > 2012-03-07 >> > > > > > >> > > > > > >> > > > > > >>14:49:31|12372|1:1|image|DataStructure.pm:retrieve_user_data(1352)|att >> > > > > > em >> > > > > > p >> > > > > > ting >> > > > > > to retrieve and store data for user: user.id = '1' >> > > > > > 2012-03-07 >>14:49:31|12372|1:1|image|utils.pm:getnewdbh(2709)|database >> > > > > > requested (vcl) does not match handle stored in $ENV{dbh} >> > > > > > (information_schema:localhost) >> > > > > > 2012-03-07 >>14:49:31|12372|1:1|image|utils.pm:getnewdbh(2760)|database >> > > > > > handle >> > > > > > stored in $ENV{dbh} >> > > > > > 2012-03-07 >> > > > > > >> > > > > > >>14:49:31|12372|1:1|image|DataStructure.pm:retrieve_user_data(1415)|dat >> > > > > > a >> > > > > > has >> > > > > > been retrieved for user: admin (id: 1) >> > > > > >> > > > >> > > >> > >> > >> > >> > -- >> > Dmitri Chebotarov >> > Virtual Computing Lab Systems Engineer, TSD - Ent Servers & Messaging >> > 223 Aquia Building, Ffx, MSN: 1B5 >> > Phone: (703) 993-6175 >> > Fax: (703) 993-3404 >> > > >
