Thanks for the answers. I also got personal mail with patch for the DirectFB color problem. With DirectFB I could not get good enough deinterlace setup. And I could not solve the tearing problem with XV. But fortunately I got very good result with vidixfb video driver.
/usr/bin/vdr-fbfe --video vidixfb --fullscreen --aspect=auto --post tvtime:method=Greedy2Frame,cheap_mode=0,pulldown=0,framerate_mode=full,use_progressive_frame_flag=1 --reconnect mode "1280x720-50" # D: 74.250 MHz, H: 37.500 kHz, V: 50.000 Hz geometry 1280 720 1280 720 32 timings 13468 212 448 20 5 40 5 hsync high vsync high accel true rgba 8/16,8/8,8/0,8/24 endmode CPU load is about 35% with Athlon 2500+ XP-M. - Kimmo Petri Helin wrote: > On Nov 29, 2007 6:07 PM, Kimmo Taskinen <[EMAIL PROTECTED]> wrote: > >> My G550's DVI port is connected TV's HDMI. On software side have tried >> xineliboutput's remote frontends. Otherwise everything is fine but I >> have small issues with both X and DirectFB. >> >> 1. With vdr-sxfe I seem to have some tearing effect. Does XV support >> sync-to-vblank? >> >> > > Yes its does. You can use xvinfo and xvattr to see the current > settings, and xvattr to set them. > > -Petri > > _______________________________________________ > vdr mailing list > firstname.lastname@example.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > > _______________________________________________ vdr mailing list email@example.com http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr