As far as I can see I get the needed modules loaded (stb6100, stb0899, lnbp21 saa7416, budget-ci) When I try make unload and make load it loads 204 modules and I get no image at all anymore in vdr, nor on the nexus-s nor on the s2-3200. I think because s2-3200 comes as adapter0 and nexus as adapter1 When I rmmod all modules and just modprobe dvb-ttpci and stv0299, it works normally. When I modprobe stb6100, stb0899 and budget-ci, I can see an image on the nexus for a few minutes and then I read in the logs "now tuned to ..." and I get a black screen.
Thanks for your assistance serge -----Oorspronkelijk bericht----- Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Namens Reinhard Nissl Verzonden: donderdag 10 januari 2008 22:44 Aan: VDR Mailing List Onderwerp: Re: [vdr] Two VDR's on one machine Hi, serge pecher schrieb: > Could you have a look at > http://dvbkivabien2.info/viewtopic.php?f=7&t=12943&p=121435#p121435 where a > gave more explanation about my problem. Its seems that the tuner of the > S2-3200 is not detected, but I don't know what to do. Well, I don't understand French. Try this: cd /path/to/multiproto/tree make unload make load Check the output of dmesg now or have a look at /var/log/messages (other distributions my use a different file). Bye. -- Dipl.-Inform. (FH) Reinhard Nissl mailto:[EMAIL PROTECTED] _______________________________________________ vdr mailing list email@example.com http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr _______________________________________________ vdr mailing list firstname.lastname@example.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr