On Sat, Oct 3, 2009 at 12:52 PM, Simon Baxter <linu...@nzbaxters.com> wrote:
> I've been playing around with these values and have discovered the following
> (I only have SD channels - none HD) when replaying recordings.
> Setting engine.buffers.audio_num_buffers to 2300 (10x default) does help
> with the skips in audio - where under the default value (230) I
> intermittantly get 2-3 second jumps in audio.
> #engine.buffers.video_num_buffers is left at the default of 500. If I set
> this any higher, fast forwarding or rewinding causes the video to jump about
> 90 seconds.
> engine.buffers.video_num_frames (default 15) I've had to set to 60. Anything
> less than this seems to make the video jump 2-3 seconds, in line with the
> audio_num_buffers described above. With this set to 60, there's no lost
> audio but video/audio still gets out of sync, and it gets worse and worse
> for 20 seconds then the audio stops and the video catches up. Also with
> anything <60, I get PPPPPPPP on the vdr console when replaying recordings.
What video card/driver do you use? I know of another guy with similar
problems but with my Nvidia 8400GS using vdpau it works fine with just
default settings. I've never had to adjust anything.
vdr mailing list