That's what we thought also, but why then would it work just fine before the catalog recovery?
I do have a hosts file entry for the system. Currently it is off the network so nslookup is not working, but even when it was on the network and name resolution was working fine the issue was still there. Joe Infantino MCP, MCSA, Security+, ITILv3 Senior Systems Analyst Security and Server Operations Intersil Corporation email: jinfant...@intersil.com <mailto:jinfant...@intersil.com> office: 321-724-7119 fax: 321-729-1186 www.intersil.com From: Shekel Tal [mailto:tal.she...@uk.fujitsu.com] Sent: Friday, March 16, 2012 5:56 AM To: Infantino, Joe (Contractor); veritas-bu@mailman.eng.auburn.edu Subject: RE: cold catalog recovery Doesn't sound like a netbackup issue Sounds like a host configuration issue - maybe dns Are you returning 127.0.0.1 even when you have any entry in your local hosts? The system could be configured not to look at hosts Can you resolve forward and reverse lookup when using nslookup? Regards, Tal Shekel CSA FUJITSU From: veritas-bu-boun...@mailman.eng.auburn.edu [mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Infantino, Joe (Contractor) Sent: 15 March 2012 20:39 To: veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] cold catalog recovery We are trying to upgrade our NBU hardware and OS and are running into some issues that seem related to doing a cold catalog recovery and name resolution. Current setup: Windows 2003 x86 SP2 NBU 6.5.6 New setup: Windows 2008 x64 SP2 NBU 6.5.6 Current server and new server are configured with the same name and ip address. ISSUE: We can do a cold catalog backup and restore just fine but have a serious issue in the end. After both successes if we open the Activity Monitor we get an error - "Not connected, check if services are up." All service are up. bpjobsd log shows <2> job_connect: Can't connect automatically to client pbcobk01 status = 25 err = 10061 <2> job_connect: Can't connect to client pbcobk01 <16> main: Can't connect to pbcobk01 (46) We did a complete system rebuild, installed NBU 6.5.6, and configured to write to disk. Test backup ran and Activity Monitor worked fine. Did the catalog recovery and the issue came back. I did some bpclntcmd tests and they all come back with the correct name but the IP shows as 127.0.0.1. I added the hostname and real IP to the hosts file with no luck. I tried the following tests: bpclntcmd -pn = correct short name with 127.0.0.1 bpclntcmd -self = correct short name with 127.0.0.1 bpclntcmd -hn pbcobk01 = correct short name with 127.0.0.1 bpclntcmd -ip xxx.xxx.xxx.xxx = correct host and xxx.xxx.xxx.xxx for ip address If I do these test on the current server they come back with the actual IP of the system. TIA Joe Infantino MCP, MCSA, Security+, ITILv3 Senior Systems Analyst Security and Server Operations Intersil Corporation email: jinfant...@intersil.com <mailto:jinfant...@intersil.com> www.intersil.com <file:///\\www.intersil.com> Unless otherwise stated, this email has been sent from Fujitsu Services Limited, from Fujitsu (FTS) Limited, or from Fujitsu Telecommunications Europe Limited, together "Fujitsu". This email is only for the use of its intended recipient. Its contents are subject to a duty of confidence and may be privileged. Fujitsu does not guarantee that this email has not been intercepted and amended or that it is virus-free. Fujitsu Services Limited, registered in England No 96056, registered office 22 Baker Street, London W1U 3BW. Fujitsu (FTS) Limited, registered in England No 03808613, registered office 22 Baker Street, London W1U 3BW. Fujitsu Telecommunications Europe Limited, registered in England No 2548187, registered office Solihull Parkway, Birmingham Business Park, Birmingham, B37 7YU.
_______________________________________________ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu