Thanks for all replies. Will check support.veritas.com.
> You should check failover policies and settings on the array side. > > DMP will adjust them automatically - depending on it's ASL support. > > -khurram > > Jim Senicka <[EMAIL PROTECTED]> wrote: No setup required. DMP > figures it all out > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Omer > Faruk Sen > Sent: Saturday, August 11, 2007 7:27 AM > To: veritas-vx@mailman.eng.auburn.edu > Subject: [Veritas-vx] dmp question? > > Hi, > > I am a little new to vertias volume manger. I have a problem with > understanding multipathing concept and VxVm. As far as I have read > > DMP is enabled by default. Volume Manager detects multipath systems with > the Universal Worldwide Device Identifiers (WWD IDs) and manages > multipath targets, such as disk arrays, which define policies for using > more than one path. > > I wanted to ask if there is any additional steps(with vxdmpadm) that I > have to take for a system with 2 hba and 2 fiber switches or volume > manager understands that 4 paths are the same (from wwd ids) and sets up > evertything by itself? > > Best Regards, > > > -- > Omer Faruk Sen > http://www.faruk.net > _______________________________________________ > Veritas-vx maillist - Veritas-vx@mailman.eng.auburn.edu > http://mailman.eng.auburn.edu/mailman/listinfo/veritas-vx > > _______________________________________________ > Veritas-vx maillist - Veritas-vx@mailman.eng.auburn.edu > http://mailman.eng.auburn.edu/mailman/listinfo/veritas-vx > > > > --------------------------------- > Luggage? GPS? Comic books? > Check out fitting gifts for grads at Yahoo! Search. -- Omer Faruk Sen http://www.faruk.net _______________________________________________ Veritas-vx maillist - Veritas-vx@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-vx
