Tony, good point, will try it. Currently my setup is that the head has appr. 30 degree from horizontal. The more vertical setup might help to keep the wast falling in my basket, which is mounted below the vise. Thanks for the advice Rene Cologne,Germany
-----Urspr�ngliche Nachricht----- Von: Tony Spezio <[EMAIL PROTECTED]> An: [EMAIL PROTECTED] <[EMAIL PROTECTED]> Datum: Freitag, 1. Februar 2002 17:06 Betreff: Re: [VFB] Rotary Vise Rene, The best way to access the tiny hooks in a Regal is to turn the head up almost vertical if you can. This will give you full access to the small hook. There is one little disadvantage, the bobbin will hang close to the vise stem. Using a bobbin rest will take care of that. I find it real easy to tie small hooks on a Regal that way. Tony [EMAIL PROTECTED] "Bill P." wrote: > Hi Rene, > > My Regal holds everything from 0/4 to 24 very secure. Only disadvantage is > that the access to smaller hooks is limited a bit. > > > Regards > Rene > Cologne, Germany > -----Urspr�ngliche Nachricht----- > Von: Bill P. <[EMAIL PROTECTED]> > An: [EMAIL PROTECTED] <[EMAIL PROTECTED]> > Datum: Donnerstag, 31. Januar 2002 22:04 > Betreff: RE: [VFB] Rotary Vise > > My own personal preference is that I like to control the force applied to > the hook manually... just a personal preference is all. No particular vise > in mind. > > Bill
