|
You may be able to reform the ferrule by the use of
tapered pins.
Bob
----- Original Message -----
Sent: Friday, May 31, 2002 3:08 AM
Subject: Re: [VFB] Re: Bamboo Question -
answer from Jimmy M.
Jimmy,
well I don't have the rod yet but I will take all
things you have said into consideration thanks for the info one other quick
question, My dad gave me his old bamboo rod and it is in mint condition all
except this one ferrul he said he shut it in a door and it is ever so slightly
bent not much though just enough to make it impossible to put the male ferrul
in should I wrap a towel around it and have a go at it with a pair of plyers?
this rod has lots of sentimental value to it and I realy would like to keep it
all origanal.
Thank you
Zach
----- Original Message -----
Sent: Tuesday, May 28, 2002 7:43
PM
Subject: [VFB] Re: Bamboo Question -
answer from Jimmy M.
Zach, look for the obvious things like split cane. I'm
not talking about the bamboo strips coming apart at glue joints where the
bamboo is joined. If the cane has been bent severely, you'll
see a splintery appearance of the cane. Is the cane completely broken
in half? It can be repaired by "scarfing", but that's not a job for a
"first time" bamboo rod restorer. Do the rod pieces have a
severe "set" to them?, i.e. are they "bowed" , crooked, etc. This can be
remedied, but takes time and "know how". Is the reel seat useable?
If not, you can put a new one on the rod for around $20 If the
cork is ruined, it will have to be pulled off and re-corked. What
condition are the ferrules in? Cracks, deep dents? The guides can be
easily replaced, but broken/cracked ferrules are another story.
If you can find one that is in reasonable condition, it'll be
fun to restore it. If in poor condition, it'll tax your patience and
pocketbook.
Cheers,
JIMMY
***************************************************************************
Angela
and Zachary wrote:
001001c20682$d9716e40$[EMAIL PROTECTED]
type="cite">
I am thinking about looking for an old bamboo
rod to restore my question is what flaws should I stay away from? is a rod
ever to far gone?
thanks for your answeres
Zach
|
