On Behalf Of Deborah Duran
> Subject: RE: [VFB] Casting a big or heavy fly
> 
> 
> Jerry
> I like that fly!  I’m going to tie some of those up for our 
> trips to the Cape.  My buddy blew out his Powell Tiburon 
> 10wt. 

Deb,

which Loomis do you have?  If I had to pick and  a fly rod to cast for
distance and accuracy in a gymnasium there is no doubt I would choose and an
8 weight GLX.  After all the years of improvements and new rods on the
market, for  weight and cast ability there is still no match for the GLX.

However, I do not generally cast in a gymnasium. I am usually on the flats
with a minimum of five to ten miles per hour of wind and the GLX has
problems finishing a cast of 60 feet or more with a fly of any weight  or
size.  I actually had conversations with Tim Rajeff when he was still at
Loomis.  He told me  they had received a number of complaints from their
guides in Florida and the Bahamas about how often a cast would simply
collapse in it almost any kind of wind. 

If you remember, Loomis tried a number of solutions including the
introduction of the Nautikos series. While  a real cannon, it also weighed
as much as a cannon.

They have finally solved this problem with the introduction of the new
Crosscurrent series and
GLX Crosscurrent. You can own one for $600..
I personally, now use an 8 wt. Temple Fork crxi. and T&T Saltwater Horizon
in a 9 wt. The T&T
is a rod I have had for years, and have yet to find anything that casts
typical salt water flies in wind as well. OTOH, I would not purchase that
rod today. I would never spend more than the 200 to $300 than a Temple Fork
costs. 

 I have cast the Tiburon at various  shows and was impressed, but again that
was indoors with no wind.
I do have a 14 weight Tiburon that I have never cast. I purchased it for 50
bucks knowing someday
I would join DonO in Cabo for sailfish.




JG
 
Jerry Goldsmith
Altamonte Springs, Fl
[EMAIL PROTECTED]

 


Reply via email to