Patch 8.1.0496
Problem: No tests for indent files.
Solution: Add a mechanism for running indent file tests. Add a first test
for Vim indenting.
Files: runtime/indent/Makefile, runtime/indent/testdir/runtest.vim,
runtime/indent/testdir/cleantest.vim, runtime/indent/README.txt,
runtime/indent/testdir/README.txt, runtime/indent/testdir/vim.in,
runtime/indent/testdir/vim.ok, Filelist
*** ../vim-8.1.0495/runtime/indent/Makefile 2018-10-25 16:50:51.432794651
+0200
--- runtime/indent/Makefile 2018-10-25 15:09:00.266824902 +0200
***************
*** 0 ****
--- 1,13 ----
+ # Portable Makefile for running indent tests.
+
+ VIM = vim
+
+ # Run the tests that didn't run yet or failed previously.
+ # If a test succeeds a testdir/*.out file will be written.
+ # If a test fails a testdir/*.fail file will be written.
+ test:
+ $(VIM) --not-a-term -u testdir/runtest.vim
+
+
+ clean:
+ $(VIM) --not-a-term -u testdir/cleantest.vim
*** ../vim-8.1.0495/runtime/indent/testdir/runtest.vim 1970-01-01
01:00:00.000000000 +0100
--- runtime/indent/testdir/runtest.vim 2018-10-25 16:46:35.694821475 +0200
***************
*** 0 ****
--- 1,117 ----
+ " Runs all the indent tests for which there is no .out file
+
+ set nocp
+ filetype indent on
+ set nowrapscan
+
+ au! SwapExists * call HandleSwapExists()
+ func HandleSwapExists()
+ " Ignore finding a swap file for the test input and output, the user might
be
+ " editing them and that's OK.
+ if expand('<afile>') =~ '.*\.\(in\|out\|fail\|ok\)'
+ let v:swapchoice = 'e'
+ endif
+ endfunc
+
+ for fname in glob('testdir/*.in', 1, 1)
+ let root = substitute(fname, '\.in', '', '')
+
+ " Execute the test if the .out file does not exist of when the .in file is
+ " newer.
+ let in_time = getftime(fname)
+ let out_time = getftime(root . '.out')
+ if out_time < 0 || in_time > out_time
+ call delete(root . '.fail')
+ call delete(root . '.out')
+
+ set sw& ts& filetype=
+ exe 'split ' . fname
+
+ let did_some = 0
+ let failed = 0
+ let end = 1
+ while 1
+ " Indent all the lines between "START_INDENT" and "END_INDENT"
+ exe end
+ let start = search('\<START_INDENT\>')
+ let end = search('\<END_INDENT\>')
+ if start <= 0 || end <= 0 || end <= start
+ if did_some == 0
+ call append(0, 'ERROR: START_INDENT and/or END_INDENT not found')
+ let failed = 1
+ endif
+ break
+ else
+ let did_some = 1
+
+ " Execute all commands marked with INDENT_EXE and find any pattern.
+ let lnum = start
+ let pattern = ''
+ let at = ''
+ while 1
+ exe lnum + 1
+ let lnum_exe = search('\<INDENT_EXE\>')
+ exe lnum + 1
+ let indent_at = search('\<INDENT_\(AT\|NEXT\|PREV\)\>')
+ if lnum_exe > 0 && lnum_exe < end && (indent_at <= 0 || lnum_exe <
indent_at)
+ exe substitute(getline(lnum_exe), '.*INDENT_EXE', '', '')
+ let lnum = lnum_exe
+ let start = lnum
+ elseif indent_at > 0 && indent_at < end
+ if pattern != ''
+ call append(indent_at, 'ERROR: duplicate pattern')
+ let failed = 1
+ break
+ endif
+ let text = getline(indent_at)
+ let pattern = substitute(text, '.*INDENT_\S*\s*', '', '')
+ let at = substitute(text, '.*INDENT_\(\S*\).*', '\1', '')
+ let lnum = indent_at
+ let start = lnum
+ else
+ break
+ endif
+ endwhile
+
+ exe start + 1
+ if pattern == ''
+ exe 'normal =' . (end - 1) . 'G'
+ else
+ let lnum = search(pattern)
+ if lnum <= 0
+ call append(indent_at, 'ERROR: pattern not found: ' . pattern)
+ let failed = 1
+ break
+ endif
+ if at == 'AT'
+ exe lnum
+ elseif at == 'NEXT'
+ exe lnum + 1
+ else
+ exe lnum - 1
+ endif
+ normal ==
+ endif
+ endif
+ endwhile
+
+ if !failed
+ " Check the resulting text equals the .ok file.
+ if getline(1, '$') != readfile(root . '.ok')
+ let failed = 1
+ endif
+ endif
+
+ if failed
+ exe 'write ' . root . '.fail'
+ echoerr 'Test ' . fname . ' FAILED!'
+ sleep 2
+ else
+ exe 'write ' . root . '.out'
+ endif
+
+ quit! " close the indented file
+ endif
+ endfor
+
+ qall!
*** ../vim-8.1.0495/runtime/indent/testdir/cleantest.vim 1970-01-01
01:00:00.000000000 +0100
--- runtime/indent/testdir/cleantest.vim 2018-10-25 14:30:08.074821926
+0200
***************
*** 0 ****
--- 1,6 ----
+ " Deletes all the test output files: *.fail and *.out
+ for fname in glob('testdir/*.out', 1, 1) + glob('testdir/*.fail', 1, 1)
+ call delete(fname)
+ endfor
+
+ quit
*** ../vim-8.1.0495/runtime/indent/README.txt 2010-05-15 13:03:29.000000000
+0200
--- runtime/indent/README.txt 2018-10-25 16:42:14.648927510 +0200
***************
*** 43,45 ****
--- 43,47 ----
The user may have several options set unlike you, try to write the file such
that it works with any option settings. Also be aware of certain features not
being compiled in.
+
+ To test the indent file, see testdir/README.txt.
*** ../vim-8.1.0495/runtime/indent/testdir/README.txt 1970-01-01
01:00:00.000000000 +0100
--- runtime/indent/testdir/README.txt 2018-10-25 16:43:55.332109491 +0200
***************
*** 0 ****
--- 1,92 ----
+ TESTING INDENT SCRIPTS
+
+ We'll use FILETYPE for the filetype name here.
+
+
+ FORMAT OF THE FILETYPE.IN FILE
+
+ First of all, create a FILETYPE.in file. It should contain:
+
+ - A modeline setting the 'filetype' and any other option values.
+ This must work like a comment for FILETYPE. E.g. for vim:
+ " vim: set ft=vim sw=4 :
+
+ - At least one block of lines to indent, prefixed with START_INDENT and
+ followed by END_INDENT. These lines must also look like a comment for your
+ FILETYPE. You would normally leave out all indent, so that the effect of
+ the indent command results in adding indent. Example:
+
+ " START_INDENT
+ func Some()
+ let x = 1
+ endfunc
+ " END_INDENT
+
+ - Optionally, a line with INDENT_EXE, followed by a Vim command. This will be
+ executed before indenting the lines. Example:
+
+ " START_INDENT
+ " INDENT_EXE let g:vim_indent_cont = 6
+ let cmd =
+ \ 'some '
+ \ 'string'
+ " END_INDENT
+
+ Note that the command is not undone, you may need to reverse the effect for
+ the next block of lines.
+
+ - Alternatively to indenting all the lines between START_INDENT and
+ END_INDENT, use a INDENT_AT line, which specifies a pattern to find the line
+ to indent. Example:
+
+ " START_INDENT
+ " INDENT_AT this-line
+ func Some()
+ let f = x " this-line
+ endfunc
+ " END_INDENT
+
+ Alternatively you can use INDENT_NEXT to indent the line below the matching
+ pattern:
+
+ " START_INDENT
+ " INDENT_NEXT next-line
+ func Some()
+ " next-line
+ let f = x
+ endfunc
+ " END_INDENT
+
+ Or use INDENT_PREV to indent the line above the matching pattern:
+
+ " START_INDENT
+ " INDENT_PREV prev-line
+ func Some()
+ let f = x
+ " prev-line
+ endfunc
+ " END_INDENT
+
+ It's best to keep the whole file valid for FILETYPE, so that syntax
+ highlighting works normally, and any indenting that depends on the syntax
+ highlighting also works.
+
+
+ RUNNING THE TEST
+
+ Before running the test, create a FILETYPE.ok file. You can leave it empty at
+ first.
+
+ Now run "make test". After Vim has done the indenting you will see a
+ FILETYPE.fail file. This contains the actual result of indenting, and it's
+ different from the FILETYPE.ok file.
+
+ Check the contents of the FILETYPE.fail file. If it is perfectly OK, then
+ rename it to overwrite the FILETYPE.ok file. If you now run "make test" again,
+ the test will pass and create a FILETYPE.out file, which is identical to the
+ FILETYPE.ok file.
+
+ If you try to run "make test" again you will notice that nothing happens,
+ because the FILETYPE.out file already exists. Delete it, or do "make clean",
+ so that the text runs again. If you edit the FILETYPE.in file, so that it's
+ newer than the FILETYPE.out file, the test will also run.
*** ../vim-8.1.0495/runtime/indent/testdir/vim.in 1970-01-01
01:00:00.000000000 +0100
--- runtime/indent/testdir/vim.in 2018-10-25 16:47:11.262537836 +0200
***************
*** 0 ****
--- 1,46 ----
+ " vim: set ft=vim sw=4 :
+
+ " START_INDENT
+
+ func Some()
+ let x = 1
+ endfunc
+
+ let cmd =
+ \ 'some '
+ \ 'string'
+
+ " END_INDENT
+
+ " START_INDENT
+ " INDENT_EXE let g:vim_indent_cont = 6
+
+ let cmd =
+ \ 'some '
+ \ 'string'
+
+ " END_INDENT
+
+ " START_INDENT
+ " INDENT_EXE unlet g:vim_indent_cont
+ " INDENT_AT this-line
+ func Some()
+ let f = x " this-line
+ endfunc
+ " END_INDENT
+
+ " START_INDENT
+ " INDENT_NEXT next-line
+ func Some()
+ " next-line
+ let f = x
+ endfunc
+ " END_INDENT
+
+ " START_INDENT
+ " INDENT_PREV prev-line
+ func Some()
+ let f = x
+ " prev-line
+ endfunc
+ " END_INDENT
*** ../vim-8.1.0495/runtime/indent/testdir/vim.ok 1970-01-01
01:00:00.000000000 +0100
--- runtime/indent/testdir/vim.ok 2018-10-25 16:45:29.103354381 +0200
***************
*** 0 ****
--- 1,46 ----
+ " vim: set ft=vim sw=4 :
+
+ " START_INDENT
+
+ func Some()
+ let x = 1
+ endfunc
+
+ let cmd =
+ \ 'some '
+ \ 'string'
+
+ " END_INDENT
+
+ " START_INDENT
+ " INDENT_EXE let g:vim_indent_cont = 6
+
+ let cmd =
+ \ 'some '
+ \ 'string'
+
+ " END_INDENT
+
+ " START_INDENT
+ " INDENT_EXE unlet g:vim_indent_cont
+ " INDENT_AT this-line
+ func Some()
+ let f = x " this-line
+ endfunc
+ " END_INDENT
+
+ " START_INDENT
+ " INDENT_NEXT next-line
+ func Some()
+ " next-line
+ let f = x
+ endfunc
+ " END_INDENT
+
+ " START_INDENT
+ " INDENT_PREV prev-line
+ func Some()
+ let f = x
+ " prev-line
+ endfunc
+ " END_INDENT
*** ../vim-8.1.0495/Filelist 2018-09-19 22:00:26.150988737 +0200
--- Filelist 2018-10-25 15:16:32.851409638 +0200
***************
*** 691,696 ****
--- 691,701 ----
runtime/compiler/README.txt \
runtime/indent/*.vim \
runtime/indent/README.txt \
+ runtime/indent/Makefile \
+ runtime/indent/testdir/README.txt \
+ runtime/indent/testdir/*.vim \
+ runtime/indent/testdir/*.in \
+ runtime/indent/testdir/*.ok \
runtime/ftplugin/*.vim \
runtime/ftplugin/logtalk.dict \
runtime/ftplugin/README.txt \
*** ../vim-8.1.0495/src/version.c 2018-10-25 13:31:33.833906872 +0200
--- src/version.c 2018-10-25 16:50:35.800917806 +0200
***************
*** 794,795 ****
--- 794,797 ----
{ /* Add new patch number below this line */
+ /**/
+ 496,
/**/
--
God made the integers; all else is the work of Man.
-- Kronecker
/// Bram Moolenaar -- [email protected] -- http://www.Moolenaar.net \\\
/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
\\\ an exciting new programming language -- http://www.Zimbu.org ///
\\\ help me help AIDS victims -- http://ICCF-Holland.org ///
--
--
You received this message from the "vim_dev" maillist.
Do not top-post! Type your reply below the text you are replying to.
For more information, visit http://www.vim.org/maillist.php
---
You received this message because you are subscribed to the Google Groups
"vim_dev" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
