UPDATE:: The Mac still won't boot, without a battery or HDD or Floppy Drive. I will test the 3.6v Lithium Ion 1\2AA battery that I pulled from my (Now dead) 6100 which still was able to keep time. I am hoping that this one will replace the one that was in my Classic which appears to be from the factory...
On Sun, Apr 26, 2009 at 9:31 PM, Christian Wacker <[email protected]> wrote: > one is the 40SC pulled from the classic, as the origional one > The other, as i just re-opened my Classic, does have the resistors on > it, and is a Quantum ProDrive LPS 3.5" HDD 250MB SCSI with a firmware > copyright of 1993 > > (both are ProDrive LPS disks) > > The cable IS keyed > I will test it WITHOUT a battery and HDD to see what happens to it... > > > On Sun, Apr 26, 2009 at 8:23 PM, Gregg Eshelman <[email protected]> wrote: >> >> >> What'd help you to help us help you ;) is if you'd tell us the brand of the >> drives and their model numbers, exactly as printed on the drives. >> >> --- On Sun, 4/26/09, Christian Wacker <[email protected]> wrote: >> >>> From: Christian Wacker <[email protected]> >>> Subject: Re: Battery for Mac Classic >>> To: [email protected] >>> Date: Sunday, April 26, 2009, 5:52 PM >>> the old one does, but the new one doesn't... what do i >>> do then? >>> other question... getting back on topic... will the PRAM >>> battery from >>> an LCII work in the classic? >>> >>> On Sun, Apr 26, 2009 at 7:50 PM, Ken Daggett >>> <[email protected]> wrote: >>> > >>> > >>> > On 26 Apr 2009, at 17:34:57 PDT, Christian Wacker >>> wrote: >>> > >>> >> How can I check for a resistor pack? what does it >>> look like? >>> > -------------- >>> > Most are two shiny black strips on the circuit board >>> of the >>> > drive, just above the SCSI connector. >> >> >> >> >> >> >> >> > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/vintage-macs?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
