Are you sure I have to have stuff on the Mac Plus side? That's what I'm trying to avoid.
I was hoping I could somehow just run the Chooser on the Mac Plus side and mount the share/disk on the Plus. On Jun 7, 8:07 pm, Christian Wacker <[email protected]> wrote: > Do you have appleshare, filesharing, filesharing monitor, and the > appletalk extentions? ( I think that is what they are called) you will > need those on _both_ of the macs in order for them to see and share > files between one another. I am still trying to get my LCII and > PowerMac 6100 to talk, but I have only spend an hour or so on it > before I gave up and decided to wait for the rain to stop so I can > drag a few more monitors out of the garage... and find another ADB > cable... > > Good luck. > > > > On Sun, Jun 7, 2009 at 8:27 PM, Sterling<[email protected]> wrote: > > > I like talking to myself, lol! > > > I think it must be some sort of software incompatibility between 6.0.8 > > and 7.5.3? > > > I've got lights blinking on the Asante now on the Tx and Rx when I > > open the Chooser on the Plus. > > So I think it's talking to the AppleTalk network. > > > I gave the Share username of Office on my Basilisk (no password) and > > put Office as the username on the Plus. > > > Can someone confirm that there is something else I need to load on the > > Plus to get this to work? > > Or is there a way to connect the Plus to the Basilisk without having > > to load something? > > > I've got an SE that I guess I could try, but I think it's running 6.x > > something too... > > > On Jun 7, 7:04 pm, Sterling <[email protected]> wrote: > >> Ok, I think I am one step closer, but still nothing on the Plus. > > >> I installed the Basilisk Ethernet driver and switched to that > >> interface on my computer in the Basilisk setup. > >> I changed the System on the Basilisk to use a correct IP for that > >> private network and I can browse again with iCab. > >> So I think Basilisk is back online, but this time directly on Ethernet > >> to the switch. > > >> I see more blinking lights on the Asante device now, so I'm guessing > >> my Basilisk is chattering Appletalk on the ethernet... > > >> But on the Plus side I don't see anything and on the Asante I don't > >> see the Tx light doing anything. > > >> Again I tried plugging the D9 connector in the Printer and the Modem > >> but still nothing. > > >> Am I missing something on the software side now? > > >> On Jun 7, 6:44 pm, Sterling <[email protected]> wrote: > > >> > Wow, I've bought another Mac Plus off Ebay... > > >> > It was nice though, advertised as just a Plus, but someone had > >> > modified and put a fan, lock bar and 4MB of memory in it. > > >> > Anywho, I am not working on my process of connecting up my older Macs > >> > on system 6.0.8 to my Basilisk emulator on my PC. > > >> > But I must not be understanding something or something is not > >> > connecting. > > >> > This is what I have: > > >> > Basilisk properly connected to my ethernet (iCab is running and > >> > browsing just fine) on my switch. > >> > My Plus is connected to an Asantetalk D9 to Ethernet converter. > > >> > In Basilisk I have 7.5.3 r2 running and turned on file sharing and > >> > shared a folder. > >> > On the Plus I pull up Choser and AppleTalk is on, but nothing is in > >> > the window. > >> > I'm not seeing any lights blinking on the Asante when I pull up the > >> > Chooser so I'm guessing the Mac isn't bothering to talk to the network > >> > yet? > > >> > I've swapped the D9 in the Printer and Modem ports, and swapped cables > >> > and swapped Asante units (have two from Ebay). > > >> > The only thing I can think of is maybe the Basilisk in 'Router' mode > >> > is dropping layer2 traffic to the ethernet port and killing AppleTalk?- > >> > Hide quoted text - > > >> - Show quoted text -- Hide quoted text - > > - Show quoted text - --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/vintage-macs?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
