Thanks for the link Abel, that's some good information! I liked that some of them created those pages and described the chemical process in more detail.
Thinking about the Gel stuff, I think for now I'll stick with the low- fi method I'm doing. But I did buy a clear plastic container today to help the parts get more sunlight; one is about 7 inches deep for the smaller stuff and the other should fit a case sideways. Seems to be working well, with none of the side affects listed on those pages. And nothing complicated either, just some bottles of Hydrogen Peroxide, water and some scoops of Oxyclean. Doesn't get much easier or cheaper than that. But the hard part I fear is going to be removing the CRT and stuff from the front of the Mac Plus/SE units and finding a safe place to hold that while I de-yellow the front. On Jun 23, 9:23 pm, Abel Ortiz Monasterio <[email protected]> wrote: > A few months ago, someone on this board posted a link to site where someone > had used pretty much the same formula, but instead of a solution he made it > in to a gel, that kept him from having to dip the case, paint the gel over > an it stays. > > I haven't had time, I'll try it one of these days, here are the links in > case some one wants to try it out. > > http://retr0bright.wikispaces.com/ > > http://retr0bright.wikispaces.com/Using+Retr0Bright > > Abel > > > > On Tue, Jun 23, 2009 at 10:11 PM, Pete <[email protected]> wrote: > > > You can use blacklights instead of the Sun. Just needs to be a UV source. > > > Sonny Hung wrote: > > > On Tue, Jun 23, 2009 at 10:47 PM, Sterling <[email protected] > > > <mailto:[email protected]>> wrote: > > > > It's been a day and a half and I've gotten good results on the Mac > > > Plus case. > > > > I'm wondering if anyone has used a clear container - Glass or Plastic > > > with the solution mentioned. > > > But in addition used a rotating base of some sort so that sun could be > > > to all sides evenly throughout the entire immersion process? > > > Also I would think that a custom container made with an insert to off > > > set the inside of the case would require less solution too. > > > > It's just a day dreamer blabberings I get into when I think of doing > > > something... maybe a bit overly thought out but any comments?- Hide > > > quoted text - > > - Show quoted text - --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/vintage-macs?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
