At 00:48 -1000 on 05/07/02, Galen Tatsuo Komatsu wrote: > Procedures say to remove Jumper 79 and bridge 79. J78 is that >tiny little rectangular doohickey? Reading on it prior I thought I'd
Yes. >just be taking out a bit of solder or cutting a connection. Just want to >be sure of things...what is that thing anyway? It's a zero-ohm resistor, better known as a jumper :) >Checking wht I need to bridge (so I could measure a wire) I noticed the >CCFAQ site bridges pins 8 and 12. the Geocities site bridges 8 to 10 >instead. ...then I noticed the CCFAQ procedure does a couple of other >things to the board not mentioend in the other site. > >Is there a better one of the two? I basically just plan to drop a 575 The VGA mod is better because it stresses the analogue board far less. ______________________________________________________ Chris Lawson <http://lowendmac.net/techref/> Columnist, Low End Mac <http://lowendmac.net/macdan/> ______________________________________________________ -- Vintage Macs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Enter To Win A | -- Canon PowerShot Digital Cameras start at $299 | Free iBook! | Support Low End Mac <http://lowendmac.com/lists/support.html> Vintage Macs list info: <http://lowendmac.com/lists/vintagemacs.shtml> The FAQ: <http://macfaq.org/> Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/vintage.macs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
