I think I got it to work. I took the accell arm of my old 30 pict carb and it fits great. It might need some adjustment on the end of the arm. It looks like it will move at the right time. I gotta clean the carb, then I'll try it out!
Eric ----- Original Message ----- From: Jerry Johnson<mailto:[EMAIL PROTECTED]> To: [email protected]<mailto:[email protected]> Sent: Thursday, April 19, 2007 11:29 AM Subject: Re: [vintagvw] 34 Pict Carb Linkage > Be careful if you grind on the alternator - some parts of the cast >housing are pretty thin, and there's hot wires inside...ZAP! I used a Dremel (high speed drill) with a grinding wheel to file down the casting post which was in the way of the carb linkage. After sanding this down far enough, I covered the exposed surface with a thin coat of JB Weld. That was five or six years ago, and I've had no problems with the carb or the alternator. However, I discovered that I am no a big fan of the 34 series Bocar carburator. Granted it works, but it's no Solex. _________________________________________________________________ Exercise your brain! Try Flexicon. http://games.msn.com/en/flexicon/default.htm?icid=flexicon_hmemailtaglineapril07<http://games.msn.com/en/flexicon/default.htm?icid=flexicon_hmemailtaglineapril07> _______________________________________________ vintagvw site list [email protected]<mailto:[email protected]> http://lists.sjsu.edu/mailman/listinfo/vintagvw<http://lists.sjsu.edu/mailman/listinfo/vintagvw> _______________________________________________ vintagvw site list [email protected] http://lists.sjsu.edu/mailman/listinfo/vintagvw
