Hi to all you would be scanners! 

The stanndscann pro comes with a plug transformer and this works for both the 
uk and the us, so I imagine it will be fine for most, if not all, countries. 
The transformer plug has two round pins and so you may need to use an adaptor 
to suit your country's setup. 

Hth sandy. 

Sent from my iPhone

On 10 Mar 2013, at 00:23, Kawal Gucukoglu <kawa...@me.com> wrote:

> Hello All.
> 
> I am going to order the Stand Scan Pro but would like to know, if I put in 
> the destination of where I want to order it to, will the UK adaptor come 
> automatically?
> 
> Kawal.
> On 9 Mar 2013, at 21:27, Ron Pelletier <ron.pellet...@sympatico.ca> wrote:
> 
>> Hi Fanus,
>> 
>> I have been to South Africa but I can't remember which adaptor I used.  Of
>> course, you will need a converter as well as the adaptor because, in North
>> America we use 110-120 volts at 60 cycles and South Africa is 220 volts at,
>> I believe, 50 cycles.  Before leaving here, I purchased a 220 to 110 volt
>> converter and it came with 4 or 5 adaptors.  One of them definitely fits.  I
>> believe its 3 prong.  I think 2 round and a flat but I'm not absolutely
>> sure.  A set of adaptors is very inexpensive and available anywhere.  My
>> adaptors were, from European 2 round prongs to everything else.  If you need
>> a converter only for basic appliances, you don't need to purchase the
>> converter for electronics such as a computer.  A simple converter for
>> something like a shaver will work and is not very expensive at all.   
>> 
>> HTH
>> 
>> Ron & Danvers
>> 
>> -----Original Message-----
>> From: viphone@googlegroups.com [mailto:viphone@googlegroups.com] On Behalf
>> Of Sieghard Weitzel
>> Sent: Saturday, March 09, 2013 1:57 PM
>> To: viphone@googlegroups.com
>> Subject: RE: Prizmo with StandScan Pro
>> 
>> Hi Fanus,
>> 
>> You are correct, North America has 2 flat prongs and from how you describe
>> it your 2-round prong configuration sounds just like what I am used to from
>> growing up in Germany. However, I just did a Google search for "What power
>> plugs are used in South Africa" and I found the following website:
>> 
>> http://www.worldstandards.eu/electricity.htm
>> 
>> This website describes 14 different plug configurations (from type A through
>> type N) which are used around the world. According to this, Type M is most
>> widely used in South Africa and while it sounds similar to Type E and Type F
>> which are the German standards, I believe it is different. But I am sure you
>> can find an adapter or maybe the Standscan comes with some adapters. I once
>> bought a Skype desktop telephone from a company called Ipevo and it came
>> with about 6 different adapters. It is completely incomprehensible to me why
>> there isn't more standardization. I guess it wouldn't be an easy thing to
>> change something like that, but I'm sure it could be done over time.
>> Of course we all know that the German Type F "SchuKo" plug is the best
>> because, well... it's German *smile*
>> 
>> 
>> Regards,
>> Sieghard
>> 
>> -----Original Message-----
>> From: viphone@googlegroups.com [mailto:viphone@googlegroups.com] On Behalf
>> Of Fanus
>> Sent: Saturday, March 09, 2013 4:10 AM
>> To: viphone@googlegroups.com
>> Subject: Re: Prizmo with StandScan Pro
>> 
>> Hello Anne and list
>> I want to order the StandScan pro but I am also considering to buy the AC
>> adapter. My problem is that they give three pin configurations, for US, UK
>> and europe. If I remember correctly the US has two flat pins but I am not
>> sure of the UK and Europe. Here in South Africa we use adapters with two
>> round pins. Which of the UK or Europe adapters will work?
>> Regards
>> Fanus
>> 
>> ----- Original Message -----
>> From: "Anne Robertson" <annefromo...@gmail.com>
>> To: <viphone@googlegroups.com>
>> Sent: Saturday, March 09, 2013 10:15 AM
>> Subject: Re: Prizmo with StandScan Pro
>> 
>> 
>> Hello Julian,
>> 
>> Here's the link for the StandScan Pro:
>> http://standscan.com/StandScan/index.php/product/standscan.html
>> 
>> It took nearly three weeks to arrive, but it's great.
>> 
>> Cheers,
>> 
>> Anne
>> 
>> On 9 Mar 2013, at 07:44, Julian <mrc1...@gmail.com> wrote:
>> 
>>> Hi,
>>> 
>>> Can you provide a link or information on where I can 
>>> purchase this
>>> device? Thanks in advance.
>>> 
>>> Julian
>> 
>> -- 
>> You received this message because you are subscribed to the 
>> "VIPhone" Google Group.
>> To search the VIPhone public archive, visit 
>> http://www.mail-archive.com/viphone@googlegroups.com/.
>> To post to this group, send email to 
>> viphone@googlegroups.com.
>> To unsubscribe from this group, send email to 
>> viphone+unsubscr...@googlegroups.com.
>> For more options, visit this group at 
>> http://groups.google.com/group/viphone?hl=en.
>> --- 
>> You received this message because you are subscribed to the 
>> Google Groups "VIPhone" group.
>> To unsubscribe from this group and stop receiving emails 
>> from it, send an email to 
>> viphone+unsubscr...@googlegroups.com.
>> For more options, visit 
>> https://groups.google.com/groups/opt_out.
>> 
>> 
>> 
>> -- 
>> You received this message because you are subscribed to the "VIPhone" Google
>> Group.
>> To search the VIPhone public archive, visit
>> http://www.mail-archive.com/viphone@googlegroups.com/.
>> To post to this group, send email to viphone@googlegroups.com.
>> To unsubscribe from this group, send email to
>> viphone+unsubscr...@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/viphone?hl=en.
>> --- 
>> You received this message because you are subscribed to the Google Groups
>> "VIPhone" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to viphone+unsubscr...@googlegroups.com.
>> For more options, visit https://groups.google.com/groups/opt_out.
>> 
>> 
>> 
>> -- 
>> You received this message because you are subscribed to the "VIPhone" Google
>> Group.
>> To search the VIPhone public archive, visit
>> http://www.mail-archive.com/viphone@googlegroups.com/.
>> To post to this group, send email to viphone@googlegroups.com.
>> To unsubscribe from this group, send email to
>> viphone+unsubscr...@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/viphone?hl=en.
>> --- 
>> You received this message because you are subscribed to the Google Groups
>> "VIPhone" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to viphone+unsubscr...@googlegroups.com.
>> For more options, visit https://groups.google.com/groups/opt_out.
>> 
>> 
>> 
>> -- 
>> You received this message because you are subscribed to the "VIPhone" Google 
>> Group.
>> To search the VIPhone public archive, visit 
>> http://www.mail-archive.com/viphone@googlegroups.com/.
>> To post to this group, send email to viphone@googlegroups.com.
>> To unsubscribe from this group, send email to 
>> viphone+unsubscr...@googlegroups.com.
>> For more options, visit this group at 
>> http://groups.google.com/group/viphone?hl=en.
>> --- 
>> You received this message because you are subscribed to the Google Groups 
>> "VIPhone" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to viphone+unsubscr...@googlegroups.com.
>> For more options, visit https://groups.google.com/groups/opt_out.
> 
> -- 
> You received this message because you are subscribed to the "VIPhone" Google 
> Group.
> To search the VIPhone public archive, visit 
> http://www.mail-archive.com/viphone@googlegroups.com/.
> To post to this group, send email to viphone@googlegroups.com.
> To unsubscribe from this group, send email to 
> viphone+unsubscr...@googlegroups.com.
> For more options, visit this group at 
> http://groups.google.com/group/viphone?hl=en.
> --- 
> You received this message because you are subscribed to the Google Groups 
> "VIPhone" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to viphone+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/groups/opt_out.
> 
> 

-- 
You received this message because you are subscribed to the "VIPhone" Google 
Group.
To search the VIPhone public archive, visit 
http://www.mail-archive.com/viphone@googlegroups.com/.
To post to this group, send email to viphone@googlegroups.com.
To unsubscribe from this group, send email to 
viphone+unsubscr...@googlegroups.com.
For more options, visit this group at 
http://groups.google.com/group/viphone?hl=en.
--- 
You received this message because you are subscribed to the Google Groups 
"VIPhone" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to viphone+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


Reply via email to