Thanks to both of you> I didn't have the same problems other had putting it together. I have the pro and will try that.
On 10/27/13, Sandratomkins <[email protected]> wrote: > Following on from this: I just tried Prizmo with the scan stand pro but with > no lights turned on in the really quite dark environment and found that > Prizmo activated the flash for me and make quite a reasonable job of the > scan. So perhaps for those who only have the simple light boxes this is some > sort of answer? > Sandy. > > Sent from my iPhone > >> On 27 Oct 2013, at 15:34, "Richard Turner" <[email protected]> >> wrote: >> >> Actually, I didn't forget them. >> He didn't say if he had the pro version or not and so I figured if he had >> the pro version, he would know to turn on the lights. Otherwise, well, I >> won't say, grin. >> >> Richard >> >> >> -----Original Message----- >> From: [email protected] [mailto:[email protected]] On >> Behalf >> Of Sandratomkins >> Sent: Sunday, October 27, 2013 5:44 AM >> To: [email protected] >> Subject: Re: Prizmo >> >> Richard, >> You forgot the lights! >> Sandy. >> >> Sent from my iPhone >> >>>> On 27 Oct 2013, at 04:14, Richard Turner <[email protected]> >>> wrote: >>> >>> If you have the standscan assembled correctly, and have the opening >>> facing >> you, you should find a hole in the top of the box toward the front right. >>> If you place the phone with the back facing camera pointed down through >> the hole, the home button will be near the right side of the box. The >> side >> of the phone with the volume controls will be closest to you. >>> Then, place your document, face up, on the bottom of the box with the >> bottom of the document lined up against the right side of the box and >> lined >> up across the back of the box. >>> There will be about a half inch or so qap between the top of the >>> document >> and the left side of the box. >>> If all that makes sense, you should get a nearly perfect scan. >>> HTH, >>> >>> >>> Richard >>> (Sent from Richard's iPod Touch 5th gen) >>> >>>> On Oct 26, 2013, at 8:46 PM, John Diakogeorgiou >>>> <[email protected]> >> wrote: >>>> >>>> I have Scan Stand but haven't had any success with it. Can you please >>>> explain where to place the phone on top of the box and how to place >>>> the paper inside. Thanks! >>>> >>>>> On 10/26/13, David Chittenden <[email protected]> wrote: >>>>> I have written these instructions in the past, so suspect they are >> available >>>>> in the archives. >>>>> >>>>> Open Prizmo and prepare to take a photo of the page. Before taking the >>>>> picture, ensure that the room is well-lit, but direct sunlight is not >>>>> shining on the page. In other words, too little light shades the page >> such >>>>> that the print cannot be detected. Too much light causes the white of >> the >>>>> page to enhance and the print to disappear. Also, if your body, or the >> phone >>>>> or arm is between the light source and the page, the shadow of your >>>>> body >> or >>>>> the phone can cause a dark area on the page that can make the print in >> that >>>>> area disappear. >>>>> >>>>> Next, the phone must be as flat to the plain of the page as possible. >>>>> If >> the >>>>> phone is tilted in any way, the print characters are changed visually. >> The >>>>> closer letters become short and thick whilst the more distant >>>>> characters >>>>> become small and thin. In other words, OCR may not be able to >>>>> recognise >> the >>>>> text, or parts of the text. >>>>> >>>>> The phone must be as straightly aligned to the edges of the paper as >>>>> possible. The more skew (rotation) added to the image, the lower the >> ability >>>>> of OCR to recognise the text. Though Prizmo is the most forgiving OCR >> app in >>>>> this regard, it still requires less than about 5 degrees of skew, and >> the >>>>> best recognition occurs when skew is 0. >>>>> >>>>> When the picture is taken, the camera / phone must be completely >>>>> still. >> Any >>>>> movement of the camera causes the text to blur. This is known as >>>>> jidder. >>>>> >>>>> Note: when sighted people take pictures of text for OCR, they >> automatically >>>>> compensate for all of the above. Even then, however, a light box works >>>>> better. I personally use, and very highly recommend, the StandScan Pro >> from >>>>> www.standscan.com >>>>> to correct for all of the above issues and get almost perfect OCR >>>>> conversions every time. >>>>> >>>>> When not using the StandScan Pro: >>>>> Lay the phone flat on the paper with the camera in the middle of the >> page. >>>>> Note: the camera is in the upper right corner of the back of the >>>>> iPhone >> when >>>>> the iPhone display is facing you and the home button is at the bottom >>>>> of >> the >>>>> display. Make sure the four sides of the phone are aligned with the >>>>> four >>>>> edges of the paper. >>>>> >>>>> There are four ways to take the image: double-tap on the take picture >>>>> button, split-tap on the take picture button, press the volume up >> button, or >>>>> press the volume up button on the headset if the headset is plugged >>>>> in. >> It >>>>> is very strongly advisable that the method which creates the least >> amount of >>>>> jidder is used. Double-tap the take picture button, therefore, should >> never >>>>> be done. This method will always create movement, no matter how >>>>> lightly >> one >>>>> brushes the screen. Even with the delay Prizmo has now added to help >>>>> us >>>>> blind folk, this method is still the least accurate for image capture >>>>> / >> OCR. >>>>> Pressing the volume up button, though seemingly should be the best >> method, >>>>> gives mixed results. This is because force must be applied on the side >> of >>>>> the phone which alters the phone's position in relation to the page. >> Being >>>>> blind, we cannot correct for this when it happens. I do not use the >> headset, >>>>> so cannot comment on its accuracy or how to stabilise the phone whilst >> using >>>>> the headset volume-up button. Therefore, the best method for the most >>>>> consistent results is using the split-tap. This is because, split-tap >>>>> actually activates when the tapping finger is released from the >>>>> display. >> The >>>>> split-tap command actually holds until the second finger is removed, >>>>> no >>>>> matter how long it takes (as long as neither finger moves enough to >> trigger >>>>> a movement-based command such as the rotor. >>>>> >>>>> Without moving the phone on the page, lift the phone enough to place >>>>> the >>>>> ring fingers of both hands under the phone along the long edges. Do >>>>> not >>>>> block the camera lens with the right hand's finger. It is necessary >>>>> that >>>>> both hands are used because, it is not possible to feel drifting while >>>>> lifting the phone with just one hand. With both hands, one still >>>>> drifts >> a >>>>> little, but it is easier to detect it. Press the middle fingers of >>>>> both >>>>> hands against the sides of the phone. These fingers pressing on both >> sides >>>>> stabilises the phone to the hands. Press the thumbs to the bottom of >>>>> the >>>>> phone with less pressure than the middle fingers. When the phone is >> secure >>>>> on the platform created by the fingers, >>>>> >>>>> Locate the take picture button with one of your index fingers. The >>>>> take >>>>> picture button is above the home button. When the fingertip locates >>>>> the >> take >>>>> picture button, it remains still on the button. Now, the other index >> finger >>>>> lightly touches the active display near the edge. This sets VO up for >> the >>>>> split-tap command. >>>>> >>>>> Slowly start lifting the phone as straight up from the page as >>>>> possible. >>>>> Listen for VO to say, auto focus. Most times, when this is said, the >> entire >>>>> page is in focus. Occasionally, there is a block of text, or an image, >> in >>>>> the middle of the page that the camera has focused on. If this is the >> case, >>>>> keep lifting slowly until the second time VO says, auto focus. After >>>>> one >> has >>>>> taken many OCR images, one develops a feel for the approximate proper >>>>> distance. In the beginning, take the picture at the first auto focus >> point >>>>> to start getting that feel. If one goes up too high, start over on the >> page. >>>>> By the time you start descending again, you will have drifted too far >> from >>>>> the middle of the page for a complete page image. >>>>> >>>>> When auto focus is announced, stop movement. wait a couple seconds to >> ensure >>>>> you are no longer moving the phone. Slowly lift the second finger from >> the >>>>> touchscreen to activate the take picture button, or if at the edge of >> the >>>>> touchscreen, merely slide the finger away from the active area of the >> screen >>>>> (this is what I do as it introduces the least amount of movement). >>>>> Now, >>>>> Prizmo will monitor the image until it detects no movement. It will >>>>> then >>>>> take the picture. Also, Prizmo now has tones to help guide the image. >> Use >>>>> very slow movements when attempting to utilise these guidances. Note: >>>>> because of the way we blind people tend to use sweeping movements, >>>>> move >> like >>>>> you are almost not moving; just like the way one explores the >> touchscreen >>>>> display. When I start a free-scanning session, it usually takes me two >> or >>>>> three pictures before I get a good image. After I have been scanning >>>>> for >> a >>>>> little while, I often get good images with my first picture per page. >>>>> >>>>> After the image is captured, follow the prompts for recognition. >>>>> >>>>> David Chittenden, MSc, MRCAA >>>>> Email: [email protected] >>>>> Mobile: +64 21 2288 288 >>>>> Sent from my iPhone >>>>> >>>>>> On 27 Oct 2013, at 4:08, "rubyalphonse" <[email protected]> >>>>>> wrote: >>>>>> >>>>>> Hello All, I need some one's help regarding the App Prizmo. How does >>>>>> it >>>>>> work, How to scan and get it read? I was taking picture thinking it >> will >>>>>> read, but it says the text is not detected. I will still phygit with >> it, >>>>>> till I learn, but I need help please. I will be much obliged to you. >>>>>> Thanks in advance Ruby >>>>>> -- >>>>>> You received this message because you are subscribed to the "VIPhone" >>>>>> Google Group. >>>>>> >>>>>> Post a new message to VIPhone by emailing [email protected]. >>>>>> >>>>>> Search and view the VIPhone archives by visiting >>>>>> http://www.mail-archive.com/[email protected]/. >>>>>> >>>>>> Reach the VIPhone owner and moderators by emailing >>>>>> [email protected]. >>>>>> >>>>>> Unsubscribe and leave VIPhone by emailing >>>>>> [email protected]. >>>>>> >>>>>> More VIPhone group options can be found by visiting >>>>>> http://groups.google.com/group/viphone?hl=en. >>>>>> --- >>>>>> You received this message because you are subscribed to the Google >> Groups >>>>>> "VIPhone" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send >> an >>>>>> email to [email protected]. >>>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the "VIPhone" >> Google >>>>> Group. >>>>> >>>>> Post a new message to VIPhone by emailing [email protected]. >>>>> >>>>> Search and view the VIPhone archives by visiting >>>>> http://www.mail-archive.com/[email protected]/. >>>>> >>>>> Reach the VIPhone owner and moderators by emailing >>>>> [email protected]. >>>>> >>>>> Unsubscribe and leave VIPhone by emailing >>>>> [email protected]. >>>>> >>>>> More VIPhone group options can be found by visiting >>>>> http://groups.google.com/group/viphone?hl=en. >>>>> --- >>>>> You received this message because you are subscribed to the Google >> Groups >>>>> "VIPhone" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >> an >>>>> email to [email protected]. >>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>> >>>> -- >>>> You received this message because you are subscribed to the "VIPhone" >> Google Group. >>>> >>>> Post a new message to VIPhone by emailing [email protected]. >>>> >>>> Search and view the VIPhone archives by visiting >> http://www.mail-archive.com/[email protected]/. >>>> >>>> Reach the VIPhone owner and moderators by emailing >> [email protected]. >>>> >>>> Unsubscribe and leave VIPhone by emailing >> [email protected]. >>>> >>>> More VIPhone group options can be found by visiting >> http://groups.google.com/group/viphone?hl=en. >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups >> "VIPhone" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an >> email to [email protected]. >>>> For more options, visit https://groups.google.com/groups/opt_out. >>> >>> -- >>> You received this message because you are subscribed to the "VIPhone" >> Google Group. >>> >>> Post a new message to VIPhone by emailing [email protected]. >>> >>> Search and view the VIPhone archives by visiting >> http://www.mail-archive.com/[email protected]/. >>> >>> Reach the VIPhone owner and moderators by emailing >> [email protected]. >>> >>> Unsubscribe and leave VIPhone by emailing >> [email protected]. >>> >>> More VIPhone group options can be found by visiting >> http://groups.google.com/group/viphone?hl=en. >>> --- >>> You received this message because you are subscribed to the Google >>> Groups >> "VIPhone" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an >> email to [email protected]. >>> For more options, visit https://groups.google.com/groups/opt_out. >> >> -- >> You received this message because you are subscribed to the "VIPhone" >> Google >> Group. >> >> Post a new message to VIPhone by emailing [email protected]. >> >> Search and view the VIPhone archives by visiting >> http://www.mail-archive.com/[email protected]/. >> >> Reach the VIPhone owner and moderators by emailing >> [email protected]. >> >> Unsubscribe and leave VIPhone by emailing >> [email protected]. >> >> More VIPhone group options can be found by visiting >> http://groups.google.com/group/viphone?hl=en. >> --- >> You received this message because you are subscribed to the Google Groups >> "VIPhone" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/groups/opt_out. >> >> -- >> You received this message because you are subscribed to the "VIPhone" >> Google Group. >> >> Post a new message to VIPhone by emailing [email protected]. >> >> Search and view the VIPhone archives by visiting >> http://www.mail-archive.com/[email protected]/. >> >> Reach the VIPhone owner and moderators by emailing >> [email protected]. >> >> Unsubscribe and leave VIPhone by emailing >> [email protected]. >> >> More VIPhone group options can be found by visiting >> http://groups.google.com/group/viphone?hl=en. >> --- >> You received this message because you are subscribed to the Google Groups >> "VIPhone" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/groups/opt_out. > > -- > You received this message because you are subscribed to the "VIPhone" Google > Group. > > Post a new message to VIPhone by emailing [email protected]. > > Search and view the VIPhone archives by visiting > http://www.mail-archive.com/[email protected]/. > > Reach the VIPhone owner and moderators by emailing > [email protected]. > > Unsubscribe and leave VIPhone by emailing > [email protected]. > > More VIPhone group options can be found by visiting > http://groups.google.com/group/viphone?hl=en. > --- > You received this message because you are subscribed to the Google Groups > "VIPhone" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- You received this message because you are subscribed to the "VIPhone" Google Group. Post a new message to VIPhone by emailing [email protected]. Search and view the VIPhone archives by visiting http://www.mail-archive.com/[email protected]/. Reach the VIPhone owner and moderators by emailing [email protected]. Unsubscribe and leave VIPhone by emailing [email protected]. More VIPhone group options can be found by visiting http://groups.google.com/group/viphone?hl=en. --- You received this message because you are subscribed to the Google Groups "VIPhone" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
