On Fri, January 6, 2006 0:17, Francesco Peeters (Asterisk) said:
> On Fri, January 6, 2006 0:09, Daniele orlandi said:
>> On Thursday 05 January 2006 23:21, you wrote:
>>>
>>> The 'open failed' errors occur on the connect commands...
>>
>> You are missing the /dev/visdn/cxc-control or /dev/visdn/netdev-control,
>> this
>> is how the dev directory should appear:
>>
>> # ll /dev/visdn/
>> totale 0
>> crw------- 1 root root 253, 1 5 gen 18:46 cxc-control
>> crw------- 1 root root 251, 0 5 gen 18:46 netdev-control
>> crw------- 1 root root 249, 0 5 gen 18:46 ppp
>> crw------- 1 root root 250, 0 5 gen 18:46 streamport
>> lrwxrwxrwx 1 root root 13 5 gen 18:46 timer -> timers/system
>> drwxr-xr-x 2 root root 60 5 gen 18:46 timers
>>
>> 30-visdn.rules-oldudev is missing this line:
>>
>> KERNEL="cxc-control", NAME="visdn/cxc-control"
>>
>
> I'll add that and try again
>
>> Why are you still using that old udev?
>>
>
> Because the udev in CentOS doesn't support new config format, and I am
> trying to stay as close to standard as possible, as I'l have to do 3
> identical servers once all works...
>
> If this doesn't work, I'll try updating udev from src...
>
>>> Jan 5 23:10:28 VERBOSE[8792] logger.c: == Parsing
>>> '/etc/asterisk/visdn.conf':
>>> Jan 5 23:10:28 VERBOSE[8792] logger.c: == Parsing
>>> '/etc/asterisk/visdn.conf' : Found
>>> Jan 5 23:10:28 WARNING[8792] chan_visdn.c: Unknown configuration
>>> variable
>>> type_of_number
>>> Jan 5 23:10:28 WARNING[8792] chan_visdn.c: Unknown configuration
>>> variable
>>> local_type_of_number
>>
>> Please re-update your tree, there have been a lot of configuration
>> naming
>> changes today, take visdn.conf.sample and customize it from scratch.
>>
>> Bye,
>>
>>
> Will do! Thanks!
>
> Have a good night!
>
> --
> F Peeters
> PIII 450 - 1 GB - * 1.2 - BRIstuff 0.3.0 Pre 1 - Florz patch
> 2 Sweex HFC-PCI modes=2 sync_slave=2 timer_card=0
> Cologne HFC-S pins #52, #54, #55 connected in parallel for synching.
> AMD Duron 1GHz - 1GB - * 1.2.1
> 2 Sweex HFC-PCI cards
> _______________________________________________
> Visdn-hackers mailing list
> [email protected]
> https://mailman.uli.it/mailman/listinfo/visdn-hackers
>
>
Just a quick update...
As far as I can tell, visdn_configurator works fine and asterisk seems to
start as well...
Next step is to try and configure the trunk and do some in- and outbound
dialling! ;-)
If all works, I'll write an [EMAIL PROTECTED] how-to for vISDN...
--
F Peeters
PIII 450 - 1 GB - * 1.2 - BRIstuff 0.3.0 Pre 1 - Florz patch
2 Sweex HFC-PCI modes=2 sync_slave=2 timer_card=0
Cologne HFC-S pins #52, #54, #55 connected in parallel for synching.
AMD Duron 1GHz - 1GB - * 1.2.1
2 Sweex HFC-PCI cards
_______________________________________________
Visdn-hackers mailing list
[email protected]
https://mailman.uli.it/mailman/listinfo/visdn-hackers
