On Fri, January 6, 2006 17:59, Daniele Orlandi said:
> On Friday 6 January 2006 13:51, Francesco Peeters (Asterisk) wrote:
>>
>> It is F3 and remains F3 until I dial inbound... When I do so, the
>> interface comes up (F7) and the CLI DOES show visdn data:
>> q931 visdn0:TEI[0]: Received message:
>> q931 <- call reference = 94.I (len 1)
>> q931 <- message_type = SETUP (5)
>
> This means that the communication is working up to libq931.
>
>> q931 visdn0:CALL[94.I]: Got SETUP
>> q931 visdn0:CALL[94.I]: Requested channel B2 available
>> q931 visdn0:CALL[94.I]: U0_NULL_STATE ==to==> U6_CALL_PRESENT
>> etc.
>
> What follows these log lines?
>
q931 visdn0:TEI[0]: Releasing message
-- poll timeout = -1
-- visdn_q931_setup_indication
-- poll timeout = -1
And then nothing. There's no indication that (*) actually gets any hint of
incoming calls on the visdn channel...
--
F Peeters
PIII 450 - 1 GB - * 1.2 - BRIstuff 0.3.0 Pre 1 - Florz patch
2 Sweex HFC-PCI modes=2 sync_slave=2 timer_card=0
Cologne HFC-S pins #52, #54, #55 connected in parallel for synching.
AMD Duron 1GHz - 1GB - * 1.2.1
2 Sweex HFC-PCI cards
_______________________________________________
Visdn-hackers mailing list
[email protected]
https://mailman.uli.it/mailman/listinfo/visdn-hackers
